Patrik Burg

Calorific evaluation and energy potential of grape pomace

Abstract This article deals with energetic evaluation and potential of pomace – a waste product originating during production of grape wine. Calorimetric analysis of 19 grapevine varieties was performed in 2013 and 2014. The aim was to specify their combustible limit and the gross calorific value. The evaluations were performed on pristine pomace, pomace without seeds, and only on seeds themselves. The results obtained imply that pomace is an interesting energetic resource with a gross calorific value of 16.07-18.97 MJ kg−1. Lower calorific values were detected in pomace after seed separation ie 14.60-17.75 MJ kg−1; on the contrary, seeds alone had the highest calorific values of 19.78-21.13 MJ kg−1. It can be assumed from the results of energetic evaluation of pomace in Czech Republic conditions that, by purposeful and efficient usage of pomace, 6.4 GWh of electric energy and 28 GWh of thermal energy can be generated.

Seed oil content and selected qualitative parameters of oils from grape seeds

Grape seed oil ( Oleum vitis viniferae ) represents promising plant oil, which is used mainly in gastronomy and for pharmaceutical purposes as well as for various technical applications. In this paper, there were examined oil contents and oil quality properties of seeds taken from 8 grape cultivars. Oil contents were found to be different for each cultivar, which ranged from 11.5% (Dornfelder) to 17.5% (Riesling). The results showed a dependence between the length of the growing season for individual varie-ties and the total content of oil in seeds. Fatty acid concentrations in the evaluated oil samples were in various ranges, while the highest values were determined in linoleic acid 70.10 to 71.55%, oleic acid 15.61 to 17.14%, palmitic acid 6.87 to 8.18% and stearic acid 3.16 to 3.90%. Saturated fatty acid values were lower than the values of monounsaturated fatty acids and polyunsaturated fatty acids in all oil samples. The degree of unsaturation in the grape seed oil ranged between 88.6 - 89.21%. Thanks to its content, grape seed oil can be considered as a food supplement improving the nutri-tional value of the human diet.

Study of rheological behaviour of wines

Abstract This study deals with rheological properties of various wine varieties. Samples of the following wines were used for this experiment: André, Cabernet Moravia, Laurot, Saint Laurent, Gruner Veltliner, Pinot Blanc, Müller Thurgau, and Riesling Italico. These samples were obtained from wine produced from the grapes collected in the Czech Republic (Morava region, subregion Velke Pavlovice). In the first phase, the chemical composition of the samples was determined. The following chemical parameters were determined: total acidity, pH, content of the alcohol, reduced sugars, free SO2, total SO2, and volatile acids. In the second phase of the study, the physical properties of the samples were determined and the samples of the wines were subjected to rheological tests. These tests consisted in determination of apparent viscosity in relation to temperature, hysteresis loop tests, and apparent viscosity related to time. The dependence of the shear rate on the shear stress was described with the Herschel-Bulkley mathematical model. The experiment yielded the following findings: seven out of the eight samples behaved as non-Newtonian fluids at low temperature (5°C); non-Newtonian behaviour was changed into Newtonian at the temperature higher than 10°C; non-Newtonian behaviour was characterised as thixotropic behaviour; the degree of thixotropy is relatively small and reaches 1.85 Pa s-1 ml-1.

Determination of rheological behaviour of wine lees

Abstract This study deals with the rheological properties of wine lees. Samples of wine lees of the Saint Laurent variety were used in this experiment. The investigated wine lees arose in the process of production red grape wine in 2013 (Czech Republic). At first, the chemical background was determined. The chemical background includes the following chemical parameters: total acidity, pH, alcohol content, reduced sugars, free SO2, total SO2, and volatile acid. In the second phase of the study, physical properties were determined. Specifically, a sample of wine lees was subjected to rheological tests. These tests consisted in determination of dependence of dynamic viscosity on the temperature, hysteresis loop tests, dependence of dynamic viscosity on the time and step-down in the shear rate test. The experiment demonstrated that the dynamic viscosity increased with increased temperature – this phenomenon is caused by thermolabile proteins – and the wine lees has rheopectic behaviour; the degree of rheopexy was found to rise with the increasing temperature.

Comparison of rheological properties of varietal grape seed oils

The aim of this work was to determine the rheological properties of grape seed oils from different varieties selected at different temperatures. Measurement of the rheological properties of grape seed oils was performed on the instrument Anton Paar MCR 102. The rheological properties of the liquid have been performed at temperatures of 0 °C, 15 °C, 30 °C, 45 °C and 60 °C. The density of measured samples ranged from 0.905 ±0.002 to 0.948 ±0.002 g.mL -1 . Subsequently, there were determined viscosity values at a shear rate of 5 s -1 . As expected, the viscosity decreased with increasing temperature. Highest viscosity values reached grape seed oil of variety Pinot gris where at 0 °C the viscosity reached 0.206 ±0.037 Pa s. Samples measured at 0 °C showed non-Newtonian behavior, while at higher temperatures liquids behave as Newtonian substances. All grape seed oils samples exhibit non-Newtonian behavior at lower temperatures. In experiments carried out at 0 °C, it was observed that the tested samples tends to behave as shear-thinning system with thixotropic properties. At higher temperatures was, in line with other scientific works, observed that samples behave as Newtonian fluids. Knowledge of the rheological properties of oils are very important for their processing, storage, and may affect their quality.

Evaluation of the pressing process during oil extraction from grape seeds

This study evaluated the physical properties and oil extraction from grape seeds from three white (Welschriesling, Green Veltliner, Hibernal) and two red (Zweigelt and Saint Laurent) must varieties of grapevine by cold screw pressing as the appropriate extraction process. Pressing was carried out by a screw press UNO FM 3F by Farmet Company, Czech Republic. The pressing device consists of a matrix, 220 mm screw, head, heating mantle, nozzle holder, and a nozzle of 10 mm in diameter. The minimal and maximal screw rotation speeds were chosen within the press characteristics in order to achieve a correct expression and to avoid press overload. For successful pressing of the seeds and their storage, their initial moisture content was lowered from 40 to 45% to about 5 to 8% in a chamber dryer. The temperature in the chamber dryer did not exceeded 40 °C. Seeds of all varieties were pressed at the same speeds of 20, 40, 60, and 80 rpm. The characteristics of the grape seeds are as follows: The density ranges from 602.7 to 606.3 kg.m -3 , thousand seeds weigh is between 21.9 - 26.6 g, humidity between 5.6 - 7.1% of dry matter and seed oil content, determined by extraction and depending on the variety, ranges from 15.3 to 17.5% in dry basis. The results have confirmed that when the screw rotation speed is changed from 20 to 80 rpm, the press capacity increases on average from 0.84 kg.h -1 to 1.75 kg.h -1 , but simultaneously the oil yield reduces from 9.85 to 6.75%. This means that one kilogram of seed may produce 67.5 to 98.5 g of oil. The quantity of the pressed oil ranges from 67.5 to 98.5 g.kg -1 and thus depends on the variety. The measured results can be used in commercial practice for optimizing the pressing process for pressing of oil from grape seeds.