Patrik Eklund

Knots in trees - A new rich source of lignans

Recent research in our group has revealed that knots, i.e. the branch bases inside tree stems, commonly contain 5–10% (w/w) of lignans. Norway spruce (Picea abies) knots contain as much as 6–24% of lignans, with 7-hydroxymatairesinol (HMR) as the predominant (70–85%) lignan. Some other spruce species also contain HMR as the main lignan, but some spruce species have also other dominating lignans. Most fir (Abies) species contain secoisolariciresinol and lariciresinol as the main lignans. Lignans occur also in knots of pines (Pinus spp.), although in lower amounts than in spruces and firs. Scots pine (Pinus silvestris) knots were found to contain 0.4–3% of lignans with nortrachelogenin as the main lignan. Lignans have been identified also in knots of some hardwoods, although flavonoids are more abundant in hardwoods. Knots are detrimental in the manufacture of pulp and paper and should preferably be removed before pulping. This is possible using a recently developed industrially applicable process called ChipSep. Recent research has also established novel synthetic routes to several lignans, such as matairesinol, secoisolariciresinol, lariciresinol and cyclolariciresinol, starting from hydroxymatairesinol by applying fairly straight-forward chemical transformations. We conclude that wood knots in certain spruce and fir species constitute the richest known source of lignans in nature. The lignans occur in knots in free form and are easily extracted by aqueous ethanol, or even by water. Not only HMR, but also other potentially valuable lignans, could be produced in a scale of hundreds of tons per year by extraction of knots separated from wood chips at pulp and paper mills.

Acetylation and characterization of spruce (Picea abies) galactoglucomannans

Acetylated galactoglucomannans (GGMs) are the main hemicellulose type in most softwood species and can be utilized as, for example, bioactive polymers, hydrocolloids, papermaking chemicals, or coating polymers. Acetylation of spruce GGM using acetic anhydride with pyridine as catalyst under different conditions was conducted to obtain different degrees of acetylation on a laboratory scale, whereas, as a classic method, it can be potentially transferred to the industrial scale. The effects of the amount of catalyst and acetic anhydride, reaction time, temperature and pretreatment by acetic acid were investigated. A fully acetylated product was obtained by refluxing GGM for two hours. The structures of the acetylated GGMs were determined by SEC-MALLS/RI, (1)H and (13)C NMR and FTIR spectroscopy. NMR studies also indicated migration of acetyl groups from O-2 or O-3 to O-6 after a heating treatment in a water bath. The thermal stability of the products was investigated by DSC-TGA.

Fuzzy Filter Functions and Convergence

In this chapter we describe a fuzzy filter functor in a general framework of set functors. The general theory includes generalized Cauchy spaces, together with a construction for completions, and generalized pseudo-topologies, which in the case of the fuzzy filter functor results in a development of fuzzy convergence structures.

Neural fuzzy logic programming

A foundational development of propositional fuzzy logic programs is presented. Fuzzy logic programs are structured knowledge bases including uncertainties in rules and facts. The precise specifications of uncertainties have a great influence on the performance of the knowledge base. It is shown how fuzzy logic programs can be transformed to neural networks, where adaptations of uncertainties in the knowledge base increase the reliability of the program and are carried out automatically.

Synthetic transformation of hydroxymatairesinol from Norway spruce (Picea abies) to 7-hydroxysecoisolariciresinol, (+)-lariciresinol and (+)-cyclolariciresinol

We have developed a method for the transformation of hydroxymatairesinol to optically pure (+)-lariciresinol and (+)-cyclolariciresinol via the hitherto unreported lignan 7-hydroxysecoisolariciresinol. The two naturally occurring isomers of hydroxymatairesinol were reduced with LiAlH4 to a mixture of two epimers of 7-hydroxysecoisolariciresinol, which were further selectively transformed to (+)-lariciresinol and (+)-cyclolariciresinol by an acid catalysed intramolecular cyclisation reaction. The structure of the major isomer of 7-hydroxysecoisolariciresinol was confirmed by X-ray crystallography and thereby also the absolute configurations of the two isomers of hydroxymatairesinol were unambiguously proven. Optical purities were determined by chiral HPLC-MS/MS and optical rotation measurements.

Oligolignans in Norway spruce and Scots pine knots and Norway spruce stemwood

Abstract Oligolignans present in substantial amounts in Norway spruce and Scots pine knots were characterised. The hydrophilic knotwood substances were extracted and different chromatographic methods were applied to obtain fractions for analysis by GC, GC-MS, HR-EI-MS, LC-ESI-MS, NMR, and FTIR. β-O-4-Linked guaiacylglyceryl ethers of hydroxymatairesinol (Ia, Ib, Ic), secoisolariciresinol (II), lariciresinol (III), isolariciresinol (IV), lignan A (V), liovil (VI), conidendrin (VII), and pinoresinol (VIII) were identified in the spruce knotwood extract and β-O-4-linked guaiacylglyceryl ethers of nortrachelogenin (IX) and secoisolariciresinol (II) in the pine knotwood extract. The structures of allo-hydroxymatairesinol-4′-guaiacylglyceryl ether (Ia), hydroxymatairesinol-4-guaiacylglyceryl ether (Ib), hydroxymatairesinol-4′-guaiacylglyceryl ether (Ic), secoisolariciresisinol-4-guaiacylglyceryl ether (II), and lariciresinol-4′-guaiacylglyceryl ether (III) were determined via GC-MS, HR-MS, and 1H and 13C NMR analyses. The structures of (Ia), (Ic), (IV), (V), (VI), (VII), and (IX) have not been reported earlier. Spruce stemwood, both heartwood and sapwood, also contained oligolignans in small amounts. In addition, some dilignans with four phenylpropanoid units were tentatively identified in the hydrophilic knotwood substances.

The antimicrobial effects of wood-associated polyphenols on food pathogens and spoilage organisms.

The antimicrobial effects of the wood-associated polyphenolic compounds pinosylvin, pinosylvin monomethyl ether, astringin, piceatannol, isorhapontin, isorhapontigenin, cycloXMe, dHIMP, ArX, and ArXOH were assessed against both Gram-negative (Salmonella) and Gram-positive bacteria (Listeria monocytogenes, Staphylococcus epidermidis, Staphylococcus aureus) and yeasts (Candida tropicalis, Saccharomyces cerevisiae). Particularly the stilbenes pinosylvin, its monomethyl ether and piceatannol demonstrated a clear antimicrobial activity, which in the case of pinosylvin was present also in food matrices like sauerkraut, gravlax and berry jam, but not in milk. The destabilization of the outer membrane of Gram-negative microorganisms, as well as interactions with the cell membrane, as indicated by the NPN uptake and LIVE/DEAD viability staining experiments, can be one of the specific mechanisms behind the antibacterial action. L. monocytogenes was particularly sensitive to pinosylvin, and this effect was also seen in L. monocytogenes internalized in intestinal Caco2 cells at non-cytotoxic pinosylvin concentrations. In general, the antimicrobial effects of pinosylvin were even more prominent than those of a related stilbene, resveratrol, well known for its various bioactivities. According to our results, pinosylvin could have potential as a natural disinfectant or biocide in some targeted applications.

Hydrophobication and characterisation of O-acetyl-galactoglucomannan for papermaking and barrier applications

Norway spruce O-acetyl-galactoglucomannans (GGM) are water-soluble hemicelluloses that have potential to be produced in large scale as a side product of the mechanical pulping industry or by hot-water extraction of wood. Chemical modification is often needed to tailor such water-soluble polysaccharides into industrially valuable compounds. In this work, treatment of GGM with butyric and benzoic anhydride in pyridine/dimethylformamide rendered GGM derivatives, which were hydrophobic and partially soluble in organic solvents. The degree of substitution can be adjusted by varying the quantity of the reagent and reaction temperature. The dn/dc value for the benzoyl ester of GGM was determined in 0.05 M LiBr DMSO in order to obtain accurate molar mass analysis with SEC-MALLS-RI. Novel substances with adjusted hydrophobicity can thus be prepared on one step synthesis from natural hemicelluloses, which then showed a slight increase in the molar mass upon esterification.

Rational evaluation of the utilization of PEG-PEI copolymers for the facilitation of silica nanoparticulate systems in biomedical applications

HYPOTHESIS Polymer constructs are often applied in nanoparticulate systems to expand their applicability. One such common macromolecular modifier is poly(ethylene imine) - poly(ethylene glycol) copolymers. Despite their quite widespread use, and considering that interaction and stabilization mechanisms when combining a polyelectrolyte with a non-charged polymer are not trivial to pinpoint, these systems are generally poorly characterized in literature. Here, we attempt to provide a solid rationale to utilize PEG-PEI copolymers as surface modifiers and stabilizers/dispersion agents in solid colloidal systems with focus on biomedical applicability. EXPERIMENTAL mPEG grafted PEI copolymers with two different grafting densities and 100 nm sized non-porous silica nanoparticles (SiNP) were synthesized. Detailed physico-chemical characterization of all prepared materials was conducted with spectroscopic methods, while the interaction mechanisms between the produced copolymers and SiNP were investigated by calorimetry. The influence of increased PEG grafting ratio on the attained colloidal stability of copolymer functionalized SiNP was studied by multiple light scattering, and its further implications on the biobehavior of SiNP were evaluated. FINDINGS The interaction mechanism between SiNP and copolymers was concluded to be mainly directed by electrostatics, whereas an influence of PEG grafting density on the adsorption process was also observed. The implications of the surface modifications on the in vitro biobehavior of SiNP were investigated by combining the knowledge obtained by the detailed characterizations with microscopy evaluation under in vitro conditions.

Category theoretic properties of fuzzy topological spaces

Abstract In this paper we establish some important category theoretic properties, in particular smallness conditions, for categories of fuzzy topological spaces. We also obtain a non-existence of compactifications.