Paul A. J. Bagot

Hydrogen production from formic acid decomposition at room temperature using a Ag–Pd core–shell nanocatalyst

Formic acid (HCOOH) has great potential as an in situ source of hydrogen for fuel cells, because it offers high energy density, is non-toxic and can be safely handled in aqueous solution. So far, there has been a lack of solid catalysts that are sufficiently active and/or selective for hydrogen production from formic acid at room temperature. Here, we report that Ag nanoparticles coated with a thin layer of Pd atoms can significantly enhance the production of H₂ from formic acid at ambient temperature. Atom probe tomography confirmed that the nanoparticles have a core-shell configuration, with the shell containing between 1 and 10 layers of Pd atoms. The Pd shell contains terrace sites and is electronically promoted by the Ag core, leading to significantly enhanced catalytic properties. Our nanocatalysts could be used in the development of micro polymer electrolyte membrane fuel cells for portable devices and could also be applied in the promotion of other catalytic reactions under mild conditions.

Direct observation of individual hydrogen atoms at trapping sites in a ferritic steel

Heavy hydrogen gets frozen in place Hydrogen embrittlement contributes to the failure of steel in a wide variety of everyday applications. Various strategies to mitigate hydrogen embrittlement, such as adding carbides into the steel, are hard to validate because we are unable to map the hydrogen atoms. Chen et al. combined fluxing steel samples with deuterium and a cryogenic transfer protocol to minimize hydrogen diffusion, allowing for detailed structural analysis (see the Perspective by Cairney). Their findings revealed hydrogen trapped in the cores of the carbide precipitates. The technique will be applicable to a wide range of problems, including corrosion, catalysis, and hydrogen storage. Science, this issue p. 1196; see also p. 1128 The combination of deuteration and a cryogenic transfer protocol reveals hydrogen locations in high-strength steel. The design of atomic-scale microstructural traps to limit the diffusion of hydrogen is one key strategy in the development of hydrogen-embrittlement–resistant materials. In the case of bearing steels, an effective trapping mechanism may be the incorporation of finely dispersed V-Mo-Nb carbides in a ferrite matrix. First, we charged a ferritic steel with deuterium by means of electrolytic loading to achieve a high hydrogen concentration. We then immobilized it in the microstructure with a cryogenic transfer protocol before atom probe tomography (APT) analysis. Using APT, we show trapping of hydrogen within the core of these carbides with quantitative composition profiles. Furthermore, with this method the experiment can be feasibly replicated in any APT-equipped laboratory by using a simple cold chain.

Indium clustering in a-plane InGaN quantum wells as evidenced by atom probe tomography

Atom probe tomography (APT) has been used to characterize the distribution of In atoms within non-polar a-plane InGaN quantum wells (QWs) grown on a GaN pseudo-substrate produced using epitaxial lateral overgrowth. Application of the focused ion beam microscope enabled APT needles to be prepared from the low defect density regions of the grown sample. A complementary analysis was also undertaken on QWs having comparable In contents grown on polar c-plane sample pseudo-substrates. Both frequency distribution and modified nearest neighbor analyses indicate a statistically non-randomized In distribution in the a-plane QWs, but a random distribution in the c-plane QWs. This work not only provides insights into the structure of non-polar a-plane QWs but also shows that APT is capable of detecting as-grown nanoscale clustering in InGaN and thus validates the reliability of earlier APT analyses of the In distribution in c-plane InGaN QWs which show no such clustering.

Dynamics of interfacial reactions between O(3 P) atoms and long-chain liquid hydrocarbons

Recent progress that has been made towards understanding the dynamics of collisions at the gas–liquid interface is summarized briefly. We describe in this context a promising new approach to the experimental study of gas–liquid interfacial reactions that we have introduced. This is based on laser-photolytic production of reactive gas-phase atoms above the liquid surface and laser-spectroscopic probing of the resulting nascent products. This technique is illustrated for reaction of O(3P) atoms at the surface of the long-chain liquid hydrocarbon squalane (2,6,10,15,19,23-hexamethyltetracosane). Laser-induced fluorescence detection of the nascent OH has revealed mechanistically diagnostic correlations between its internal and translational energy distributions. Vibrationally excited OH molecules are able to escape the surface. At least two contributions to the product rotational distributions are identified, confirming and extending previous hypotheses of the participation of both direct and trapping-desorption mechanisms. We speculate briefly on future experimental and theoretical developments that might be necessary to address the many currently unanswered mechanistic questions for this, and other, classes of gas–liquid interfacial reaction.

The microstructure of non-polar a-plane (11 2¯0) InGaN quantum wells

Atom probe tomography and quantitative scanning transmission electron microscopy are used to assess the composition of non-polar a-plane (11-20) InGaN quantum wells for applications in optoelectronics. The average quantum well composition measured by atom probe tomography and quantitative scanning transmission electron microscopy quantitatively agrees with measurements by X-ray diffraction. Atom probe tomography is further applied to study the distribution of indium atoms in non-polar a-plane (11-20) InGaN quantum wells. An inhomogeneous indium distribution is observed by frequency distribution analysis of the atom probe tomography measurements. The optical properties of non-polar (11-20) InGaN quantum wells with indium compositions varying from 7.9% to 20.6% are studied. In contrast to non-polar m-plane (1-100) InGaN quantum wells, the non-polar a-plane (11-20) InGaN quantum wells emit at longer emission wavelengths at the equivalent indium composition. The non-polar a-plane (11-20) quantum wells also show broader spectral linewidths. The longer emission wavelengths and broader spectral linewidths may be related to the observed inhomogeneous indium distribution.

Isothermal omega formation and evolution in the Beta-Ti alloy Ti-5Al-5Mo-5V-3Cr

Abstract The isothermal phase of Ti-5Al-5Mo-5V-3Cr wt.% is formed within a heat treatment at and identified by atom probe tomography as Ti-rich/solute lean precipitates. The composition and size remain essentially constant during ageing, although the volume fraction increases to 9.5% after ageing for 8 h. This is consistent with an ongoing transformation process of athermal to isothermal . The / interface becomes enriched with oxygen. This may be of significance as oxygen strongly stabilizes the phase, and the / interface has previously been suggested as the nucleation site for subsequent formation.

Continuous and discontinuous precipitation in Fe-1 at.%Cr-1 at.%Mo alloy upon nitriding; crystal structure and composition of ternary nitrides

Abstract The internal nitriding response of a ternary Fe–1 at.%Cr–1 at.%Mo alloy, which serves as a model alloy for many CrMo-based steels, was investigated. The nitrides developing upon nitriding were characterised by X-ray diffraction, scanning electron microscopy, electron probe microanalysis, transmission electron microscopy and atom probe tomography. The developed nitrides were shown to be (metastable) ternary mixed nitrides, which exhibit complex morphological, compositional and structural transformations as a function of nitriding time. Analogous to nitrided binary Fe–Cr and Fe–Mo alloys, in ternary Fe–Cr–Mo alloys initially continuous precipitation of fine, coherent, cubic, NaCl-type nitride platelets, here with the composition (Cr½,Mo½)N¾, occurs, with the broad faces of the platelets parallel to the {1 0 0}α-Fe lattice planes. These nitrides undergo a discontinuous precipitation reaction upon prolonged nitriding leading to the development of lamellae of a novel, hexagonal CrMoN2 nitride along {1 1 0}α-Fe lattice planes, and of spherical cubic, NaCl-type (Cr,Mo)Nx nitride particles within the ferrite lamellae. The observed structural and compositional changes of the ternary nitrides have been attributed to the thermodynamic and kinetic constraints for the internal precipitation of (misfitting) nitrides in the ferrite matrix.

Imaging of radiation damage using complementary field ion microscopy and atom probe tomography.

Radiation damage in tungsten and a tungsten-tantalum alloy, both of relevance to nuclear fusion research, has been characterized using a combination of field ion microscopy (FIM) imaging and atom probe tomography (APT). While APT provides 3D analytical imaging with sub-nanometer resolution, FIM is capable of imaging the arrangements of single atoms on a crystal lattice and has the potential to provide insights into radiation induced crystal damage, all the way down to its smallest manifestation--a single vacancy. This paper demonstrates the strength of combining these characterization techniques. In ion implanted tungsten, it was found that atomic scale lattice damage is best imaged using FIM. In certain cases, APT reveals an identifiable imprint in the data via the segregation of solute and impurities and trajectory aberrations. In a W-5at%Ta alloy, a combined APT-FIM study was able to determine the atomic distribution of tantalum inside the tungsten matrix. An indirect method was implemented to identify tantalum atoms inside the tungsten matrix in FIM images. By tracing irregularities in the evaporation sequence of atoms imaged with FIM, this method enables the benefit of FIMs atomic resolution in chemical distinction between the two species.

Atom Probe Analysis of Ex Situ Gas-Charged Stable Hydrides

In this work, we report on the atom probe tomography analysis of two metallic hydrides formed by pressurized charging using an ex situ hydrogen charging cell, in the pressure range of 200-500 kPa (2-5 bar). Specifically we report on the deuterium charging of Pd/Rh and V systems. Using this ex situ system, we demonstrate the successful loading and subsequent atom probe analysis of deuterium within a Pd/Rh alloy, and demonstrate that deuterium is likely present within the oxide-metal interface of a native oxide formed on vanadium. Through these experiments, we demonstrate the feasibility of ex situ hydrogen analysis for hydrides via atom probe tomography, and thus a practical route to three-dimensional imaging of hydrogen in hydrides at the atomic scale.

Chapter 10:Investigating Nano-structured Catalysts at the Atomic scale by Field Ion Microscopy and Atom Probe Tomography

Recent synthesis developments have refined the use of catalyst alloys, creating structures consisting of an active shell surrounding an inert core. These have been remarkably successful in reducing the total metal costs while also enhancing the surface activity of the shell. To reach an atomic-scale understanding of their structure and chemistry, Field ion/field electron microscopy (FIM/FEM) and atom probe tomography (APT) are uniquely suited to this task. This chapter will review the highlights of the research aiming at characterizing the surface reactivity, the three-dimensional structure and the composition of nano-engineered solid catalysts, as well as discussing ongoing experimental developments to improve the specimen forms and to construct in situ reaction cells, both designed to allow experiments to mimic the structures and operating conditions of industrial catalysts as closely as possible.