Paul D. Boyle

Concentrated electrolytes: decrypting electrolyte properties and reassessing Al corrosion mechanisms

Highly concentrated electrolytes containing carbonate solvents with lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) have been investigated to determine the influence of eliminating bulk solvent (i.e., uncoordinated to a Li+ cation) on electrolyte properties. The phase behavior of ethylene carbonate (EC)–LiTFSI mixtures indicates that two crystalline solvates form—(EC)3:LiTFSI and (EC)1:LiTFSI. Crystal structures for these were determined to obtain insight into the ion and solvent coordination. Between these compositions, however, a crystallinity gap exists. A Raman spectroscopic analysis of the EC solvent bands for the 3–1 and 2–1 EC–LiTFSI liquid electrolytes indicates that ∼86 and 95%, respectively, of the solvent is coordinated to the Li+ cations. This extensive coordination results in significantly improved anodic oxidation and thermal stabilities as compared with more dilute (i.e., 1 M) electrolytes. Further, while dilute EC–LiTFSI electrolytes extensively corrode the Al current collector at high potential, the concentrated electrolytes do not. A new mechanism for electrolyte corrosion of Al in Li-ion batteries is proposed to explain this. Although the ionic conductivity of concentrated EC–LiTFSI electrolytes is somewhat low relative to the current state-of-the-art electrolyte formulations used in commercial Li-ion batteries, using an EC–diethyl carbonate (DEC) mixed solvent instead of pure EC markedly improves the conductivity.

Goldilocks Effect in Magnetic Bistability: Remote Substituent Modulation and Lattice Control of Photoinduced Valence Tautomerism and Light-Induced Thermal Hysteresis

The thermal-induced and photoinduced valence tautomerism of a series of Co(dioxolene)(2)(4-X-py)(2) complexes (dioxolene = 3,5-di-tert-butylcatecholate or 3,5-di-tert-butylsemiquinonate; 4-X-py = 4-(X)pyridine, X = H (1), OMe (2), Me (3), CN (4), Br (5), NO(2) (6)) is described. The thermal valence tautomerism (ls-Co(III)(SQ)(Cat)(4-X-py)(2) <--> hs-Co(II)(SQ)(SQ)(4-X-py)(2)) is only observed for complexes 4, 5, and 6 where each is accompanied by a hysteresis loop of ca. 5 K. When a crystalline sample of 4-6 is held at 10 K in a SQUID magnetometer and irradiated with white light (lambda = 400-850 nm), the hs-Co(II) tautomer is formed. When the light source is removed, and the sample is slowly heated, the hs-Co(II) tautomer persists until ca. 90 K, approximately 40 K higher than the thermal stability of previously reported complexes. Heating and cooling the sample while maintaining irradiation results in the appearance of a new light-induced thermal hysteresis loop below 90 K (DeltaT = ca. 25 K). Below 50 K, the hs-Co(II) tautomer displays temperature-independent relaxation to the ls-Co(III) form, and above 50 K, the relaxation is thermally activated with an activation energy E(a) > ca. 1500 cm(-1). The coordination geometry (trans-pyridines), pyridine substitution, and crystal packing forces conspire to create the comparatively thermally stable photogenerated hs-Co(II) tautomer, thus providing an excellent handle for molecular and crystal engineering studies.

Improvement in phosphorescence efficiency through tuning of coordination geometry of tridentate cyclometalated platinum(II) complexes.

A series of tridentate cyclometalated platinum(II) complexes (C(∧)N*N)PtL (L = Cl or acetylide) featuring a fused five-six-membered metallacycle were synthesized. The structure of the complexes was confirmed by X-ray crystallography. In contrast to the C(∧)N(∧)N platinum complexes with a fused five-five-membered metallacycle, the platinum coordination in C(∧)N*N complexes is much closer to a square planar geometry. The photophysical properties of the complexes were studied. The geometrical change from C(∧)N(∧)N to C(∧)N*N led to a substantial improvement in phosphorescence efficiency of the complexes with an acetylide ligand in solution at room temperature. For example, the quantum yield of (C(∧)N*N)PtCCPh was measured to be 56%, demonstrating a big jump from 4% reported for (C(∧)N(∧)N)PtCCPh.

Solvate Structures and Spectroscopic Characterization of LiTFSI Electrolytes

A Raman spectroscopic evaluation of numerous crystalline solvates with lithium bis(trifluoromethanesulfonyl)imide (LiTFSI or LiN(SO2CF3)2) has been conducted over a wide temperature range. Four new crystalline solvate structures-(PHEN)3:LiTFSI, (2,9-DMPHEN)2:LiTFSI, (G3)1:LiTFSI and (2,6-DMPy)1/2:LiTFSI with phenanthroline, 2,9-dimethyl[1,10]phenanthroline, triglyme, and 2,6-dimethylpyridine, respectively-have been determined to aid in this study. The spectroscopic data have been correlated with varying modes of TFSI(-)···Li(+) cation coordination within the solvate structures to create an electrolyte characterization tool to facilitate the Raman band deconvolution assignments for the determination of ionic association interactions within electrolytes containing LiTFSI. It is found, however, that significant difficulties may be encountered when identifying the distributions of specific forms of TFSI(-) anion coordination present in liquid electrolyte mixtures due to the wide range of TFSI(-)···Li(+) cation interactions possible and the overlap of the corresponding spectroscopic data signatures.

Highly luminescent tridentate N^C*N platinum(II) complexes featured in fused five-six-membered metallacycle and diminishing concentration quenching.

A series of cyclometalating ligands, N-phenyl-N-(3-(pyridin-2-yl)phenyl)pyridin-2-amine (L1), N-(3-(1H-pyrazol-1-yl)phenyl)-N-phenylpyridin-2-amine (L2), N-phenyl-N-(3-(quinolin-2-yl)phenyl)pyridin-2-amine (L3), N-phenyl-N-(3-(pyridin-2-yl)phenyl)quinolin-2-amine (L4), N-(3-(isoquinolin-1-yl)phenyl)-N-phenylpyridin-2-amine (L5), and N-phenyl-N-(3-(pyridin-2-yl)phenyl)isoquinolin-1-amine (L6), were synthesized, which reacted with K(2)PtCl(4) in glacial acetic acid to produce N^C*N-coordinated platinum(II) complexes featured in a fused five-six-membered metallacycle, 1-6, respectively. The structures of 1, 3, 4, and 6 were determined by single crystal X-ray crystallography. The square geometries of the complexes are improved when compared with those of the N^C^N-coordinated complexes as the bite angles for the platinum in N^C*N-coordinated complexes 1, 3, and 4 are increased. The Pt-C bonds (1.94-1.95 Å) are shorter than those of C^N^N-coordinated platinum complexes but longer than those found for N^C^N-coordinated platinum complexes. With the increase of the steric interaction, the distortion of the molecules from a planar coordination geometry becomes more and more severe from 1 to 3 to 4 and 6, and in 6, the N-phenyl ring has to stand up on the coordination sphere to minimize the steric interaction with the N-isoquinolyl ring. The photophysical properties of the complexes were studied, and their absorption and emission spectra were interpreted by relating to the structural features revealed by the X-ray crystal structures and the orbital characters predicted by DFT calculations. All complexes are emissive in fluid at room temperature, and the quantum yields (up to 0.65) are comparable to those of highly emissive N^C^N-coordinated platinum complexes. Self-quenching was not observed in the concentration range of 10(-6) to 10(-4) M. Large rigidochromic shifts for the emissions of 2, 4, and 6 upon cooling from room temperature to rigid glass (77 K) were observed. Two different triplet states that control the emissions were proposed to account for the photophysical properties of 6.

The Electronic Nature of Terminal Oxo Ligands in Transition-Metal Complexes: Ambiphilic Reactivity of Oxorhenium Species

The synthesis of the Lewis acid-base adducts of B(C6F5)3 and BF3 with [DAAmRe(O)(X)] DAAm = N,N-bis(2-arylaminoethyl)methylamine; aryl = C6F5 (X = Me, 1, COCH3, 2, Cl, 3) as well as their diamidopyridine (DAP) (DAP=(2,6-bis((mesitylamino)methyl)pyridine) analogues, [DAPRe(O)(X)] (X = Me, 4, Cl, 5, I, 6, and COCH3,7), are described. In these complexes the terminal oxo ligands act as nucleophiles. In addition we also show that stoichiometric reactions between 3 and triarylphosphine (PAr3) result in the formation of triarylphosphine oxide (OPAr3). The electronic dependence of this reaction was studied by comparing the rates of oxygen atom transfer for various para-substituted triaryl phosphines in the presence of CO. From these experiments a reaction constant ρ = -0.29 was obtained from the Hammett plot. This suggests that the oxygen atom transfer reaction is consistent with nucleophilic attack of phosphorus on an electrophilic metal oxo. To the best of our knowledge, these are the first examples of mono-oxo d(2) metal complexes in which the oxo ligand exhibits ambiphilic reactivity.

An inexpensive carbohydrate derivative used as a chiral auxiliary in the synthesis of α-hydroxy carboxylic acids

Abstract Protected α-hydroxy carboxylic acids were synthesized in moderate yield and high diastereoselectivity by alkylation of glycolate (α-hydroxy acetate) enolates using a d -fructose-derived chiral auxiliary. The new chiral center was assigned the R configuration based on comparisons of optical rotations and on one crystal structure analysis. This alkylation methodology is compatible with several hydroxyl protecting groups. The free hydroxy acids were obtained upon removal of the protecting group from the hydroxyl functionality followed by saponification.

Superexchange Contributions to Distance Dependence of Electron Transfer/Transport: Exchange and Electronic Coupling in Oligo(para-Phenylene)- and Oligo(2,5-Thiophene)-Bridged Donor–Bridge–Acceptor Biradical Complexes

The preparation and characterization of three new donor-bridge-acceptor biradical complexes are described. Using variable-temperature magnetic susceptibility, EPR hyperfine coupling constants, and the results of X-ray crystal structures, we evaluate both exchange and electronic couplings as a function of bridge length for two quintessential molecular bridges: oligo(para-phenylene), β = 0.39 Å(-1) and oligo(2,5-thiophene), β = 0.22 Å(-1). This report represents the first direct comparison of exchange/electronic couplings and distance attenuation parameters (β) for these bridges. The work provides a direct measurement of superexchange contributions to β, with no contribution from incoherent hopping. The different β values determined for oligo(para-phenylene) and oligo(2,5-thiophene) are due primarily to the D-B energy gap, Δ, rather than bridge-bridge electronic couplings, H(BB). This is supported by the fact that the H(BB) values extracted from the experimental data for oligo(para-phenylene) (H(BB) = 11,400 cm(-1)) and oligo(2,5-thiophene) (12,300 cm(-1)) differ by <10%. The results presented here offer unique insight into the intrinsic molecular factors that govern H(DA) and β, which are important for understanding the electronic origin of electron transfer and electron transport mediated by molecular bridges.

Mixed Anion (Phosphate/Oxalate) Bonding to Iron(III) Materials

A novel phosphate/oxalate inorganic-organic hybrid material has been prepared to elucidate synthesis and bonding characteristics of iron(III) with both phosphate and organic matter (OM). Such mixed anion bonding of inorganic oxyanions and OM to iron(III) and aluminum(III) in environmental systems has been proposed but not proven, mainly because of the complexity of natural geochemical matrices. The compound reported here with the molecular formula of [C(3)H(12)N(2)](2)[Fe(5)(C(2)O(4))(2)(H(x)PO(4))(8)] (I) was hydrothermally synthesized and characterized by single crystal X-ray diffraction and X-ray absorption spectroscopy (XAS). In this new structure, Fe-O octahedra and P-O tetrahedra are connected by corner-sharing to form a 2-D network in the a-b plane. Oxalate anions cross-link these Fe-P layers constructing a 3-D anionic framework. A diprotonated structure-directing template, DAP (1,3-diaminopropane), resides in the oxalate layer of the structure and offsets the negative charge of the anionic framework. Iron K-edge XANES spectra confirmed that the iron in I is Fe(III). The crystal structure of I is used to successfully fit its Fe K-edge EXAFS spectrum, which exhibits spectral signatures that unambiguously identify iron-phosphate and iron-OM bonding. Such molecular spectroscopic features will be invaluable for the evaluation of complex environmental systems. Furthermore, syntheses demonstrated the critical role of the templating amine to mediate whether or not the iron(III) is reduced by the organic acid.

Mechanism for the Activation of Carbon Monoxide via Oxorhenium Complexes

Activation of CO by the rhenium(V) oxo complex [(DAAm)Re(O)(CH(3))] (1) [DAAm = N,N-bis(2-arylaminoethyl)methylamine; aryl = C(6)F(5), Mes] resulted in the isolation of the rhenium(III) acetate complex [(DAAm)Re(O(2)CCH(3))(CO)] (3). The mechanistic details of this reaction were explored experimentally. The novel oxorhenium(V) acyl intermediate [(DAAm)Re(O)(C(O)CH(3))] (2) was isolated, and its reactivity with CO was investigated. An unprecedented mechanism is proposed: CO is activated by the metal oxo complex 1 and inserted into the rhenium-methyl bond to yield acyl complex 2, after which subsequent migration of the acyl ligand to the metal oxo ligand yields acetate complex 3. X-ray crystal structures of 2 and 3 are reported.