Paul H. Holloway

Quantum Dots and Their Multimodal Applications: A Review

Semiconducting quantum dots, whose particle sizes are in the nanometer range, have very unusual properties. The quantum dots have band gaps that depend in a complicated fashion upon a number of factors, described in the article. Processing-structure-properties-performance relationships are reviewed for compound semiconducting quantum dots. Various methods for synthesizing these quantum dots are discussed, as well as their resulting properties. Quantum states and confinement of their excitons may shift their optical absorption and emission energies. Such effects are important for tuning their luminescence stimulated by photons (photoluminescence) or electric field (electroluminescence). In this article, decoupling of quantum effects on excitation and emission are described, along with the use of quantum dots as sensitizers in phosphors. In addition, we reviewed the multimodal applications of quantum dots, including in electroluminescence device, solar cell and biological imaging.

Rapid and effective labeling of brain tissue using TAT-conjugated CdS∶Mn/ZnS quantum dots

TAT (a cell penetrating peptide)-conjugated CdSratioMn/ZnS quantum dots (Qdots), intra-arterially delivered to a rat brain, rapidly (within a few minutes) labeled the brain tissue without manipulating the blood-brain-barrier (BBB). Qdot loading was sufficiently high that it allowed a gross fluorescent visualization of the whole rat brain using a low power hand-held UV lamp. Histological data clearly showed that TAT-conjugated Qdots migrated beyond the endothelial cell line and reached the brain parenchyma. Qdots without TAT did not label the brain tissue confirming the fact that TAT peptide was necessary to overcome the BBB. The present study clearly demonstrated the possibility of delivering a large amount of Qdot-based imaging agents to the brain tissue.

TAT conjugated, FITC doped silica nanoparticles for bioimaging applications

Water-in-oil (w/o) microemulsion synthesis of 70 nm size monodisperse TAT (a cell penetrating peptide, CPP) conjugated, FITC (fluorescein isothiocyanate) doped silica nanoparticles (TAT-FSNPs) is reported; human lung adenocarcinoma (A549) cells (in vitro) and rat brain tissue (in vivo) were successfully labeled using TAT-FSNPs.

Enhancing the Efficiency of Solution-Processed Polymer:Colloidal Nanocrystal Hybrid Photovoltaic Cells Using Ethanedithiol Treatment

Advances in colloidal inorganic nanocrystal synthesis and processing have led to the demonstration of organic-inorganic hybrid photovoltaic (PV) cells using low-cost solution processes from blends of conjugated polymer and colloidal nanocrystals. However, the performance of such hybrid PV cells has been limited due to the lack of control at the complex interfaces between the organic and inorganic hybrid active materials. Here we show that the efficiency of hybrid PV devices can be significantly enhanced by engineering the polymer-nanocrystal interface with proper chemical treatment. Using two different conjugated polymers, poly(3-hexylthiophene) (P3HT) and poly[2,6-(4,4-bis(2-ethylhexyl)-4H-cyclopenta[2,1-b;3,4-b]-dithiophene)-alt-4,7-(2,1,3-benzothiadiazole)] (PCPDTBT), we show that treating the polymer:nanocrystal hybrid film in an ethanedithiol-containing acetonitrile solution can increase the efficiency of the hybrid PV devices by 30-90%, and a maximum power conversion efficiency of 5.2 ± 0.3% was obtained in the PCPDTBT:CdSe devices at 0.2 sun (AM 1.5G), which was slightly reduced to 4.7 ± 0.3% at 1 sun. The ethanedithiol treatment did not result in significant changes in the morphology and UV-vis optical absorption of the hybrid thin films; however, infrared absorption, NMR, and X-ray photoelectron spectroscopies revealed the effective removal of organic ligands, especially the charged phosphonic acid ligands, from the CdSe nanorod surface after the treatment, accompanied by the possible monolayer passivation of nanorod surfaces with Cd-thiolates. We attribute the hybrid PV cell efficiency increase upon the ethanedithiol treatment to the reduction in charge and exciton recombination sites on the nanocrystal surface and the simultaneous increase in electron transport through the hybrid film.

Hybrid polymer-CdSe solar cells with a ZnO nanoparticle buffer layer for improved efficiency and lifetime

We report the use of a solution-processed ZnO nanoparticle buffer layer in hybrid solar cells based on blends of poly(3-hexylthiophene) (P3HT) and CdSe quantum dots. Depending on the size of the CdSe nanocrystal, these devices exhibit 20–70% higher photocurrent output than similar devices without the ZnO nanoparticle layer, which is attributed to a combination of electronic and optical effects. With negligible change in open-circuit voltage and a small increase in the fill factor, the power conversion efficiency of these P3HT:CdSe hybrid solar cells was increased by 30–80% with incorporation of the ZnO nanoparticle layer. The presence of the ZnO nanoparticle layer also drastically improves the stability of these hybrid solar cells. Less than 40% loss in efficiency was observed for such devices after 70 days of exposure to the laboratory ambient without any type of encapsulation.

Solution-processed, nanostructured hybrid solar cells with broad spectral sensitivity and stability

Hybrid organic-inorganic solar cells, as an alternative to all-organic solar cells, have received significant attention for their potential advantages in combining the solution-processability and versatility of organic materials with high charge mobility and environmental stability of inorganic semiconductors. Here we report efficient and air-stable hybrid organic-inorganic solar cells with broad spectral sensitivity based on a low-gap polymer poly[2,6-(4,4-bis-(2-ethylhexyl)-4H-cyclopenta[2,1-b;3,4-b]-dithiophene)-alt-4,7-(2,1,3-benzothiadiazole)] (PCPDTBT) and spherical CdSe nanoparticles. The solvents used for depositing the hybrid PCPDTBT:CdSe active layer were shown to strongly influence the film morphology, and subsequently the photovoltaic performance of the resulted solar cells. Appropriate post-deposition annealing of the hybrid film was also shown to improve the solar cell efficiency. The inclusion of a thin ZnO nanoparticle layer between the active layer and the metal cathode leads to a significant increase in device efficiency especially at long wavelengths, due to a combination of optical and electronic effects including more optimal light absorption in the active layer and elimination of unwanted hole leakage into the cathode. Overall, maximum power conversion efficiencies up to 3.7 ± 0.2% and spectral sensitivity extending above 800 nm were achieved in such PCPDTBT:CdSe nanosphere hybrid solar cells. Furthermore, the devices with a ZnO nanoparticle layer retained ∼70% of the original efficiency after storage under ambient laboratory conditions for over 60 days without any encapsulation.

Three-Dimensional Self-Assembled Hierarchical Architectures of Gamma-Phase Flowerlike Bismuth Oxide

Three-dimensional (3D) self-assembled hierarchical bismuth oxide architectures were prepared via a solution precipitation synthesis at 85 degrees C in 45 min with the aid of polyethylene glycol-8000 (PEG-8000) as a capping agent. The morphology and crystalline phase evolution was studied versus reaction time and capping agent concentration and interpreted in terms of growth mechanisms. At higher capping agent concentrations, the as-grown 3D hierarchical flowerlike bismuth oxide was crystalline cubic gamma-phase that was previously formed only at temperature > or =640 degrees C. The morphology and crystal structure of these 3D cubic gamma-phase bismuth oxide flowers were not changed with calcining up to 600 degrees C. Photoluminescence was attributed to emission from the Bi(3+) ion by a (3)P(0),(1) --> (1)S(0) transition and from defects. The gamma-phase flowerlike bismuth oxide shows better ion conductivity than that of rodlike bismuth oxide formed without the capping agent. The flowerlike morphology was attributed to modification of the nucleation and growth kinetics by the capping agent.

Mechanisms of Resonant Infrared Matrix-Assisted Pulsed Laser Evaporation

For the last decade, a variant of pulsed laser ablation, Resonant-Infrared Matrix-Assisted Pulsed Laser Evaporation (RIR-MAPLE), has been studied as a deposition technique for organic and polymeric materials. RIR-MAPLE minimizes photochemical damage from direct interaction with the intense laser beam by encapsulating the polymer in a high infrared-absorption solvent matrix. This review critically examines the thermally-induced ablation mechanisms resulting from irradiation of cryogenic solvent matrices by a tunable free electron laser (FEL). A semi-empirical model is used to calculate temperatures as a function of time in the focal volume and determine heating rates for different resonant modes in two model solvents, based on the thermodynamics and kinetics of the phase transitions induced in the solvent matrices. Three principal ablation mechanisms are discussed, namely normal vaporization at the surface, normal boiling, and phase explosion. Normal vaporization is a highly inefficient polymer deposition mechanism as it relies on collective collisions with evaporating solvent molecules. Diffusion length calculations for heterogeneously nucleated vapor bubbles show that normal boiling is kinetically limited. During high-power pulsed-FEL irradiation, phase explosion is shown to be the most significant contribution to polymer deposition in RIR-MAPLE. Phase explosion occurs when the target is rapidly heated (108 to 1010 K/s) and the solvent matrix approaches its critical temperature. Spontaneous density stratification (spinodal decay) within the condensed metastable phase leads to rapid homogeneous nucleation of vapor bubbles. As these vapor bubbles interconnect, large pressures build up within the condensed phase, leading to target explosions and recoil-induced ejections of polymer to a near substrate. Phase explosion is a temperature (fluence) threshold-limited process, while surface evaporation can occur even at very low fluences.

High efficiency photoluminescence from silica-coated CdSe quantum dots

The effects on the luminescent properties of coating CdSe quantum dots with silica are presented. Coating increased the quantum yields from ∼10%–20% to ∼80% at a maximum. The changes in quantum yields and photoluminescence peak at wavelength were discussed in terms of the effects of surface charge. By neutralizing surface charge, the emission from CdSe quantum dots was initially blueshifted followed by redshifting, and the quantum yield increased dramatically.

White light emission from single layer poly (n-vinylcarbazole) polymeric light-emitting devices by mixing singlet and triplet excimer emissions

White light electroluminescence (EL) was obtained by mixing emission from singlet and triplet excimers from a single poly (n-vinylcarbazole) (PVK) spin cast layer after irradiation of the solution with UV light. With increased UV light irradiation, the intensity from the triplet excimer (red-630 nm) of PVK increased compared with that of the singlet excimer (blue-460 nm) due to an increased population of both adjacent benzene rings being aligned with one another (fully overlapping) versus only one of the adjacent benzene rings being aligned (partially overlapping). The emission color changed from blue to white with increased UV irradiation time while the EL brightness and current density decreased and the turn-on voltage increased.