Paul H. Pax

Analysis of the scalability of diffraction-limited fiber lasers and amplifiers to high average power

We analyze the scalability of diffraction-limited fiber lasers considering thermal, non-linear, damage and pump coupling limits as well as fiber mode field diameter (MFD) restrictions. We derive new general relationships based upon practical considerations. Our analysis shows that if the fibers MFD could be increased arbitrarily, 36 kW of power could be obtained with diffraction-limited quality from a fiber laser or amplifier. This power limit is determined by thermal and non-linear limits that combine to prevent further power scaling, irrespective of increases in mode size. However, limits to the scaling of the MFD may restrict fiber lasers to lower output powers.

Power scaling analysis of fiber lasers and amplifiers based on non-silica materials

A developed formalism1 for analyzing the power scaling of diffraction limited fiber lasers and amplifiers is applied to a wider range of materials. Limits considered include thermal rupture, thermal lensing, melting of the core, stimulated Raman scattering, stimulated Brillouin scattering, optical damage, bend induced limits on core diameter and limits to coupling of pump diode light into the fiber. For conventional fiber lasers based upon silica, the single aperture, diffraction limited power limit was found to be 36.6kW. This is a hard upper limit that results from an interaction of the stimulated Raman scattering with thermal lensing. This result is dependent only upon physical constants of the material and is independent of the core diameter or fiber length. Other materials will have different results both in terms of ultimate power out and which of the many limits is the determining factor in the results. Materials considered include silica doped with Tm and Er, YAG and YAG based ceramics and Yb doped phosphate glass. Pros and cons of the various materials and their current state of development will be assessed. In particular the impact of excess background loss on laser efficiency is discussed.

Interaction of a high-power laser beam with metal sheets

Experiments with a high-power laser beam directed onto thin aluminum sheets, with a large spot size, demonstrate that airflow produces a strong enhancement of the interaction. The enhancement is explained in terms of aerodynamic effects. As laser heating softens the material, the airflow-induced pressure difference between front and rear faces causes the metal to bulge into the beam. The resulting shear stresses rupture the material and remove it at temperatures well below the melting point. The material heating is shown to conform to an elementary model. We present an analytic model of elastic bulging. Scaling with respect to spot size, wind speed, and material parameters is determined.

Mode conversion in rectangular-core optical fibers

Mode conversion from the fundamental to a higher-order mode in a rectangular-core optical fiber is accomplished by applying pressure with the edge of a flat plate. Modal analysis of the near and far field images of the fibers transmitted beam determines the purity of the converted mode. Mode conversion reaching 75% of the targeted higher-order mode is achieved using this technique. Conversion from a higher-order mode back to the fundamental mode is also demonstrated with comparable efficiency. Propagation of a higher-order mode in a rectangular-core fiber allows for better thermal management and bend-loss immunity than conventional circular-core fibers, extending the power-handling capabilities of optical fibers.

High brightness, quantum-defect-limited conversion efficiency in cladding-pumped Raman fiber amplifiers and oscillators

We present a detailed theoretical investigation of cladding-pumped Raman fiber amplification in an unexplored parameter space of high conversion efficiency (> 60%) and high brightness enhancement (> 1000). Fibers with large clad-to-core diameter ratios can provide a promising means for Raman-based brightness enhancement of diode pump sources. Unfortunately, the diameter ratio cannot be extended indefinitely since the intensity generated in the core can greatly exceed that in the cladding long before the pump is fully depleted. If left uncontrolled, this leads to the generation of parasitic second-order Stokes wavelengths in the core, limiting the conversion efficiency and as we will show, clamping the achievable brightness enhancement. Using a coupled-wave formalism, we present the upper limit on brightness enhancement as a function of diameter ratio for conventionally guided fibers. We further present strategies for overcoming this limit based upon depressed well core designs. We consider two configurations: 1) pulsed cladding-pumped Raman fiber amplifier (CPRFA) and 2) cw cladding-pumped Raman fiber laser (CPRFL).

First selective mode excitation and amplification in a ribbon core optical fiber

We propose and demonstrate amplification of a single high-order mode in an optical fiber having an elongated, ribbon-like core having an effective mode area of area of 600 µm(2) and an aspect ratio of 13:1. When operated as an amplifier, the double-clad, ytterbium doped, photonic crystal fiber produced 50% slope efficiency and a seed-limited power of 10.5 W, corresponding to a gain of 24 dB. The high order mode remained pure through 20 dB of gain without intervention or realignment.

First multi-watt ribbon fiber oscillator in a high order mode

Optical fibers in the ribbon geometry have the potential to reach powers well above the maximum anticipated power of a circular core fiber. In this paper we report the first doped silica high order mode ribbon fiber oscillator, with multimode power above 40 W with 71% slope efficiency and power in a single high order mode above 5 W with 44% slope efficiency.

Technical challenges for the future of high energy lasers

The Solid-State, Heat-Capacity Laser (SSHCL) program at Lawrence Livermore National Laboratory is a multi-generation laser development effort scalable to the megawatt power levels with current performance approaching 100 kilowatts. This program is one of many designed to harness the power of lasers for use as directed energy weapons. There are many hurdles common to all of these programs that must be overcome to make the technology viable. There will be a in-depth discussion of the general issues facing state-of-the-art high energy lasers and paths to their resolution. Despite the relative simplicity of the SSHCL design, many challenges have been uncovered in the implementation of this particular system. An overview of these and their resolution are discussed. The overall system design of the SSHCL, technological strengths and weaknesses, and most recent experimental results will be presented.

High-gain photonic crystal fiber regenerative amplifier

We have demonstrated a photonic crystal fiber-based regenerative amplifier at 1.078 microm. The input signal pulse energy is 20 pJ in a 12 ns pulse at a 3 kHz repetition rate. At 8.6 W of input pump power, the amplified output pulse energy is 157 microJ, yielding a gain of 69 dB. To our knowledge, this is the highest gain achieved in a fiber-based regenerative amplifier to date at any wavelength.

High average power lasers for future particle accelerators

Lasers are of increasing interest to the accelerator community and include applications as diverse as stripping electrons from hydrogen atoms, sources for Compton scattering, efficient high repetition rate lasers for dielectric laser acceleration, peta-watt peak power lasers for laser wake field and high energy, short pulse lasers for proton and ion beam therapy. The laser requirements for these applications are briefly surveyed. State of the art of laser technologies with the potential to eventually meet those requirements are reviewed. These technologies include diode pumped solid state lasers (including cryogenic), fiber lasers, OPCPA based lasers and Ti:Sapphire lasers. Strengths and weakness of the various technologies are discussed along with the most important issues to address to get from the current state of the art to the performance needed for the accelerator applications. Efficiency issues are considered in detail as in most cases the system efficiency is a valuable indicator of the actual abi...