Paul Kuyanov

Methods of Ga droplet consumption for improved GaAs nanowire solar cell efficiency

We describe methods of Ga droplet consumption in Ga-assisted GaAs nanowires, and their impact on the crystal structure at the tip of nanowires. Droplets are consumed under different group V flux conditions and the resulting tip crystal structure is examined by transmission electron microscopy. The use of GaAsP marker layers provides insight into the behavior of the Ga droplet during different droplet consumption conditions. Lower group V droplet supersaturations lead to a pure zincblende stacking-fault-free tip crystal structure, which improved the performance of a nanowire-based photovoltaic device.

GaAs quantum dots in a GaP nanowire photodetector

We report the structural, optical and electrical properties of GaAs quantum dots (QDs) embedded along GaP nanowires. The GaP nanowires contained p-i-n junctions with 15 consecutively grown GaAs QDs within the intrinsic region. The nanowires were grown by molecular beam epitaxy using the self-assisted vapor-liquid-solid process. The crystal structure of the NWs alternated between twinned ZB and WZ as the composition along the NW alternated between the GaP barriers and the GaAs QDs, respectively, leading to a polytypic structure with a periodic modulation of the NW sidewall facets. Photodetector devices containing QDs showed absorption beyond the bandgap of GaP in comparison to nanowires without QDs. Voltage-dependent measurements suggested a field emission process of carriers from the QDs.

Tuning the morphology of self-assisted GaP nanowires

Patterned arrays of self-assisted GaP nanowires (NWs) were grown on a Si substrate by gas source molecular beam epitaxy using various V/III flux ratios from 1-6, and various pitches from 360-1000 nm. As the V/III flux ratio was increased from 1-6, the NWs showed a change in morphology from outward tapering to straight, and eventually to inward tapering. The morphologies of the self-assisted GaP NWs are well described by a simple kinetic equation for the NW radius versus the position along the NW axis. The most important growth parameter that governs the NW morphology is the V/III flux ratio. Sharpened NWs with a stable radius equal to only 12 nm at a V/III flux of 6 were achieved, demonstrating their suitability for the insertion of quantum dots.

GaAsP nanowire-on-Si tandem solar cell

Abstract. GaAsP self-assisted core–shell p-i-n nanowires were grown on Si solar cells. The resulting tandem cell exhibited an enhanced Voc of 1.16 V, increasing from 0.54 V for the Si cell alone. Nevertheless, the efficiency of the tandem cell was only 3.51% as compared with 9.33% for the Si cell due to a current-limiting short-circuit current density from the nanowires. Further improvement in device performance can be realized by improving the nanowire open-circuit voltage and short-circuit current, related to doping of the nanowires.

Electrical characterization of chemical and dielectric passivation of InAs nanowires

The native oxide at the surface of III-V nanowires, such as InAs, can be a major source of charge noise and scattering in nanowire-based electronics, particularly for quantum devices operated at low temperatures. Surface passivation provides a means to remove the native oxide and prevent its regrowth. Here, we study the effects of surface passivation and conformal dielectric deposition by measuring electrical conductance through nanowire field effect transistors treated with a variety of surface preparations. By extracting field effect mobility, subthreshold swing, threshold shift with temperature, and the gate hysteresis for each device, we infer the relative effects of the different treatments on the factors influencing transport. It is found that a combination of chemical passivation followed by deposition of an aluminum oxide dielectric shell yields the best results compared to the other treatments, and comparable to untreated nanowires. Finally, it is shown that an entrenched, top-gated device using an optimally treated nanowire can successfully form a stable double quantum dot at low temperatures. The device has excellent electrostatic tunability owing to the conformal dielectric layer and the combination of local top gates and a global back gate.