Paul Liu

Characterization of the isomeric configuration and impurities of (Z)-endoxifen by 2D NMR, high resolution LC⬜MS, and quantitative HPLC analysis.

(Z)-Endoxifen (4-hydroxy-N-desmethyltamoxifen), an active metabolite generated via actions of CYP3A4/5 and CYP2D6, is a more potent selective estrogen receptor modulator (SERM) than tamoxifen. In the MCF-7 human mammary tumor xenograft model with female athymic mice, (Z)-endoxifen, at an oral dose of 4⬜8xa0mg/kg, significantly inhibits tumor growth. (Z)-Endoxifens potential as an alternative therapeutic agent independent of CYP2D6 activities, which can vary widely in ER+ breast cancer patients, is being actively evaluated. This paper describes confirmation of the configuration of the active (Z)-isomer through 2D NMR experiments, including NOE (ROESY) to establish spatial proton⬜proton correlations, and identification of the major impurity as the (E)-isomer in endoxifen drug substance by HPLC/HRMS (HPLC/MS-TOF). Stability of NMR solutions was confirmed by HPLC/UV analysis. For pre-clinical studies, a reverse-phase HPLC⬜UV method, with methanol/water mobile phases containing 10xa0mM ammonium formate at pH 4.3, was developed and validated for the accurate quantitation and impurity profiling of drug substance and drug product. Validation included demonstration of linearity, method precision, accuracy, and specificity in the presence of impurities, excipients (for the drug product), and degradation products. Ruggedness and reproducibility of the method were confirmed by collaborative studies between two independent laboratories. The method is being applied for quality control of the API and oral drug product. Kinetic parameters of Z- to E-isomerization were also delineated in drug substance and in aqueous formulation, showing conversion at temperatures above 25xa0°C.

LC/MS characterization of impurities and degradation products of a potent antitumor peptidic dimer, CU201.

Compound CU201 [SUIM-(d-Arg-Arg-Pro-Hyp-Gly-Igl-Ser-d-Igl-Oic-Arg)(2), where SUIM=suberimidyl; Hyp=trans-4-hydroxyproline; Igl=alpha-(2-indanyl)-glycine; Oic=octahydroindole-2-carboxylic acid], is a dimeric analog of the potent bradykinin antagonist peptide B9430. It blocks the G(alphaq,11) signal of the heterotrimeric G proteins, stimulates c-Jun kinases, and induces apoptosis in lung cancer cells with neuroendocrine features. CU201 shows potent inhibition for small-cell lung cancer cells in vitro (ED(50)=0.15microM), as well as for small-cell lung cancer SHP-77 tumor growth in vivo. An HPLC method was developed, as part of a study supported by the National Cancer Institutes (NCIs) Rapid Access to Interventional Development (RAID) program, to assess the purity and stability of CU201. Impurities and degradation products were characterized by LC/MS. The identity of a major impurity, with 1 mass unit different from CU201, was confirmed by high resolution LC/MS and the investigation of model compounds. Susceptible linkages in the peptide chains were revealed by the degradation study.

Characterization, HPLC method development and impurity identification for 3,4,3-LI(1,2-HOPO), a potent actinide chelator for radionuclide decorporation.

3,4,3-LI(1,2-HOPO), 1,5,10,14-tetra(1-hydroxy-2-pyridon-6-oyl)-1,5,10,14-tetraazatetradecane), is a potent octadentate chelator of actinides. It is being developed as a decorporation treatment for internal contamination with radionuclides. Conventional HPLC methods exhibited speciation peaks and bridging, likely attributable to the agents complexation with residual metallic ions in the HPLC system. Derivatization of the target ligand in situ with Fe(III) chloride, however, provided a single homogeneous iron-complex that can readily be detected and analyzed by HPLC. The HPLC method used an Agilent Eclipse XDB-C18 column (150 mm × 4.6mm, 5 μm) at 25°C with UV detection at 280 nm. A gradient elution, with acetonitrile (11% to 100%)/buffer mobile phase, was developed for impurity profiling. The buffer consisted of 0.02% formic acid and 10mM ammonium formate at pH 4.6. An Agilent 1200 LC-6530 Q-TOF/MS system was employed to characterize the [Fe(III)-3,4,3-LI(1,2-HOPO)] derivative and impurities. The proposed HPLC method was validated for specificity, linearity (concentration range 0.13-0.35 mg/mL, r = 0.9999), accuracy (recovery 98.3-103.3%), precision (RSD ≤ 1.6%) and sensitivity (LOD 0.08 μg/mL). The LC/HRMS revealed that the derivative was a complex consisting of one 3,4,3-LI(1,2-HOPO) molecule, one hydroxide ligand, and two iron atoms. Impurities were also identified with LC/HRMS. The validated HPLC method was used in shelf-life evaluation studies which showed that the API remained unchanged for one year at 25°C/60% RH.

HPLC method development, validation and impurity characterization for an antitumor Hsp90 inhibitor—PU-H71 (NSC 750424)

An HPLC method for the assay of the heat shock protein 90 inhibitor, PU-H71 (NSC 750424), has been developed and validated. The stress testing of PU-H71 was carried out in accordance with ICH guidelines Q1A (R2) under aqueous, acidic, alkaline, oxidative, thermolytic and photolytic conditions. The separation of PU-H71 from its impurities and degradation products was achieved within 50min on a Mac-Mod ACE 3 C18 column (150mm×4.6mm i.d., 3μm) with a gradient mobile phase comprising 20-95% acetonitrile in water, with 0.1% trifluroacetic acid in both phases. LC-quadrupole TOF/MS was used to obtain accurate mass data on various components as well as on their fragments for characterization of impurities and degradation products. The proposed HPLC assay method was validated for specificity, linearity (concentration range 0.1-0.3mg/mL, r≥0.9998), accuracy (recovery 99.7-101.1%), precision (intra-lab RSD≤1.39%, inter-lab RSD≤0.91%), sensitivity (LOD 0.08μg/mL), and ruggedness. The developed method was suitable for the assay and stability monitoring of PU-H71 drug substance.

HPLC method development, validation, and impurity characterization of a potent antitumor nucleoside, T-dCyd (NSC 764276)

An HPLC method for the assay of an anticancer nucleoside, 4-thio-2-deoxycytidine (T-dCyd, NSC 764276), has been developed and validated. The stress testing of T-dCyd was carried out in accordance with ICH guidelines Q1A (R2) under acidic, alkaline, oxidative, thermolytic, and photolytic conditions. The separation of T-dCyd from its impurities and degradation products was achieved in 40min on a Luna® Phenyl-Hexyl column (150mm×4.6mm i.d., 3μm) with a gradient elution using ammonium phosphate buffer (pH 3.85) and methanol as the mobile phase. The gradient starts from 2% and ends at 80% of methanol. Detection is by UV at 282nm. LC-QTOF/MS was used to obtain mass data for characterization of impurities and degradation products. The proposed HPLC assay method was validated for specificity, linearity (concentration range 0.25-0.75mg/mL, r≥0.9998), accuracy (recovery 98.1-102.0%), precision (RSD≤1.5%), and sensitivity (LOD 0.1μg/mL). The developed method was suitable for the quality control and stability monitoring of the T-dCyd drug substance.

HPLC method development, validation, and impurity characterization of a potent antitumor indenoisoquinoline, LMP776 (NSC 725776).

An HPLC method for the assay of a DNA topoisomerase inhibitor, LMP776 (NSC 725776), has been developed and validated. The stress testing of LMP776 was carried out in accordance with International Conference on Harmonization (ICH) guidelines Q1A (R2) under acidic, alkaline, oxidative, thermolytic, and photolytic conditions. The separation of LMP776 from its impurities and degradation products was achieved within 40 min on a Supelco Discovery HS F5 column (150 mm × 4.6 mm i.d., 5 μm) with a gradient mobile phase comprising 38-80% acetonitrile in water, with 0.1% trifluoroacetic acid in both phases. LC/MS was used to obtain mass data for characterization of impurities and degradation products. One major impurity was isolated through chloroform extraction and identified by NMR. The proposed HPLC assay method was validated for specificity, linearity (concentration range 0.25-0.75 mg/mL, r = 0.9999), accuracy (recovery 98.6-100.4%), precision (RSD ≤ 1.4%), and sensitivity (LOD 0.13 μg/mL). The validated method was used in the stability study of the LMP776 drug substance in conformance with the ICH Q1A (R2) guideline.