Paul Venema

Peptides are Building Blocks of Heat-Induced Fibrillar Protein Aggregates of β-Lactoglobulin Formed at pH 2

The proteinaceous material present in beta-lactoglobulin fibrils formed after heating (20 h at 85 degrees C) at pH 2 was identified during this study. Fibrils were separated from the nonaggregated material, and the fibrils were dissociated using 8 M guanidine chloride and 0.1 M 1,4-dithiothreitol (pH 8). Characterization of the different fractions was performed using thioflavin T fluorescence, high-performance size-exclusion chromatography, reversed-phase HPLC, and mass spectrometry (MALDI-TOF). Beta-lactoglobulin was found to be hydrolyzed into peptides with molecular masses between 2000 and 8000 Da, and the fibrils were composed of a part of these peptides and not intact beta-lactoglobulin. The majority of the peptides (both aggregated and nonaggregated) were a result from cleavage of the peptide bonds before or after aspartic acid residues. Explanations for the presence of certain peptide fragments in the fibrils are the hydrophobicity, low charge, charge distribution, and capacity to form beta-sheets.

Organogel-Emulsions with Mixtures of β-Sitosterol and γ-Oryzanol: Influence of Water Activity and Type of Oil Phase on Gelling Capability

In this study, water-in-oil emulsions were prepared from water containing different salt concentrations dispersed in an oil phase containing a mixture of β-sitosterol and γ-oryzanol. In pure oil, the β-sitosterol and γ-oryzanol molecules self-assemble into tubular microstructures to produce a firm organogel. However, in the emulsion, the water molecules bind to the β-sitosterol molecules, forming monohydrate crystals that hinder the formation of the tubules and resulting in a weaker emulsion-gel. Addition of salt to the water phase decreases the water activity, thereby suppressing the formation of sitosterol monohydrate crystals even after prolonged storage times (∼1 year). When the emulsions were prepared with less polar oils, the tubular microstructure was promoted, which significantly increased the firmness of the emulsion-gel. The main conclusion of this study is that the formation of oryzanol and sitosterol tubular microstructure in the emulsion can be promoted by reducing the water activity and/or by using oils of low polarity.

Influence of protein hydrolysis on the growth kinetics of β-lg fibrils.

Recently it was found that protein hydrolysis is an important step in the formation of β-lactoglobulin fibrils at pH 2 and elevated temperatures. The objective of the present study was to further investigate the influence of hydrolysis on the kinetics of fibril formation. Both the hydrolysis of β-lactoglobulin and the growth of the fibrils were followed as a function of time and temperature, using SDS polyacrylamide gel electrophoresis and a Thioflavin T fluorescence assay. As an essential extension to existing models, the quantification of the effect of the hydrolysis on the fibrillar growth was established by a simple polymerization model including a hydrolysis step.

Rheo-optics and food systems

Abstract Recent developments in 2D and 3D rheo-optics in foods and non-foods are being reviewed. These techniques are shown to be very valuable to construct constitutive equations that describe the non-linear rheological behaviour in 2D and 3D and couple this behaviour to the mesoscopic structure of the system.

Relation between Gelation Conditions and the Physical Properties of Whey Protein Particles

Whey protein particles have several applications in modulating food structure and for encapsulation, but there is a lack of methods to prepare particles with a very high internal protein content. In this study whey protein particles with high internal protein content were prepared through emulsification and heat gelation of 25% (w/w) whey protein isolate solution at different pH (6.8 or 5.5) and NaCl concentrations (50, 200, or 400 mM). Particles formed at pH 6.8 were spherical, whereas those formed at pH 5.5 were irregular and had a cauliflower-like appearance. Both particles had an average size of few micrometers, and the particles formed at pH 5.5 had higher protein content (∼39% w/v) than the particles formed at pH 6.8 (∼18% w/v). Similarly, particle morphology and protein density were also affected by initial NaCl concentration: particles formed at 50 mM NaCl (pH 6.8) were spherical, whereas particles formed at either 200 mM NaCl (pH 6.7) or 400 mM NaCl (pH 6.6) were irregular and protein density of the particles increased with increasing initial NaCl concentration. Whey protein particles formed at pH 5.5 showed an excellent heat stability: viscosity of the suspensions containing approximately 30% of protein particles formed at pH 5.5 did not show any change after heating at 90 °C for 30 min while the viscosity of suspensions containing protein particles prepared at other conditions increased after heating. In summary, whey protein particles with varying microstructure, shape, internal protein density, and heat stability can be formed by using heat-induced gelation of whey protein isolate at different gelling conditions.

Protein Fibrils Induce Emulsion Stabilization

The behavior of an oil-in-water emulsion was studied in the presence of protein fibrils for a wide range of fibril concentrations by using rheology, diffusing wave spectroscopy, and confocal laser scanning microscopy. Results showed that above a minimum fibril concentration depletion flocculation occurred, leading to oil droplet aggregation and enhanced creaming of the emulsion. Upon further increasing the concentration of the protein fibrils, the emulsions were stabilized. In this stable regime both aggregates of droplets and single droplets are present, and these aggregates are smaller than the aggregates in the flocculated emulsion samples at the lower fibril concentrations. The size of the droplet aggregates in the stabilized emulsions is independent of fibril concentration. In addition, the droplet aggregation was reversible upon dilution both by a pH 2 HCl solution and by a fibril solution at the same concentration. The viscosity of the emulsions containing fibrils was comparable to that of the pure fibril solution. Neither fibril networks nor droplet gel networks were observed in our study. The stabilization mechanism of emulsions containing long protein fibrils at high protein fibril concentrations points toward the mechanism of a kinetic stabilization.

The Development of Direct Extrusion-Injection Moulded Zein Matrices as Novel Oral Controlled Drug Delivery Systems.

PurposeTo evaluate the potential of zein as a sole excipient for controlled release formulations prepared by hot melt extrusion.MethodsPhysical mixtures of zein, water and crystalline paracetamol were hot melt extruded (HME) at 80°C and injection moulded (IM) into caplet forms. HME-IM Caplets were characterised using differential scanning calorimetry, ATR-FTIR spectroscopy, scanning electron microscopy and powder X-ray diffraction. Hydration and drug release kinetics of the caplets were investigated and fitted to a diffusion model.ResultsFor the formulations with lower drug loadings, the drug was found to be in the non-crystalline state, while for the ones with higher drug loadings paracetamol is mostly crystalline. Release was found to be largely independent of drug loading but strongly dependent upon device dimensions, and predominately governed by a Fickian diffusion mechanism, while the hydration kinetics shows the features of Case II diffusion.ConclusionsIn this study a prototype controlled release caplet formulation using zein as the sole excipient was successfully prepared using direct HME-IM processing. The results demonstrated the unique advantage of the hot melt extruded zein formulations on the tuneability of drug release rate by alternating the device dimensions.

Stability of aqueous food grade fibrillar systems against pH change

We report that the stability of an aqueous food grade fibril system upon pH change is affected by the presence of peptides that are formed during the process of fibril formation. We discuss several other relationships between food relevant properties and nano-scale characteristics, and compare these relationships for aqueous fibril systems to those of oil based fibril systems. In such fibril systems, dynamics, self-organisation, and sensitivity to external conditions, play an important role. These aspects are common to complex systems in general and define the future challenge in relating functional properties of food to molecular scale properties of their ingredients.

Thioflavin T fluorescence assay for β-lactoglobulin fibrils hindered by DAPH

The molecule 4,5-dianilinophthalimide was recently found to be an efficient compound in disaggregating amyloid fibrils involved in the Alzheimers disease. In this study we have investigated whether the compound 4,5-dianilinophthalimide was able to disaggregate fibrils derived from beta-lactoglobulin. In addition to a Thioflavin T fluorescence assay, flow-induced birefringence was used as an independent technique to measure the total length concentration of the fibrils. An additional advantage of the latter technique is that not only the total length concentration, but also the length distribution of the fibrils can be measured. The results from flow-induced birefringence showed that the total amount of fibrils and also the length distribution of the fibrils was not influenced by the addition of 4,5-dianilinophthalimide, even though this was suggested by the results of the Thioflavin T assay. The results of flow-induced birefringence were confirmed by rheological measurements and transmission electron microscopy. Our findings show that the use of a Thioflavin T assay in order to probe the possible disaggregating effect of certain compounds can give misleading results.

The influence of pH and ionic strength on the swelling of dense protein particles

We have studied swelling properties and stability of protein particles prepared through emulsification and heat-induced gelation of whey proteins under different conditions. The protein particles themselves are stable over a wide pH range, but around pH 5 aggregation was observed, presumably because of a weakened electrostatic repulsion close to the protein iso-electric point. Protein leakage from the particles was found not to be higher than 8% (w/w) in most of the pH range, but increased significantly at alkaline pH. The pore size of the particles is in the range of 4 to 20 nm at neutral pH and the particles show a pH- and salt-responsive swelling, due to their polyampholytic character, as shown by confocal scanning electron microscopy analysis. These results indicate that these whey protein particles could be used as targeted delivery vehicles. The pH sensitive swelling of the particles may also result in significant changes in the volume of the particles, thereby influencing the rheological properties of dispersions made out of these particles, especially in concentrated systems.