Paulo J. Gomes

Bundling resources across supply chain dyads

Purpose – The purpose of this paper is to analyze how firms are redesigning the organizational architecture of supply chains, bundling and unbundling resources, sharing information and coordinating flows in order to facilitate capability partitioning. It aims to analyze how process interdependencies are managed either through modularity or coordination mechanisms. The paper is anchored in the emergent theory of modularity, a transaction cost‐based perspective of modular systems.Design/methodology/approach – This paper adopts the case study methodology. It uses an in‐depth case study of Logoplaste, a global supplier of plastic packaging, in particular investigating how the firm organizes supply chain activities around an integration mode designated as “hole‐in‐the‐wall.”Findings – In a context of high process interdependence the firm has developed a coordination capability, an ability to manage the interfaces at minimum cost either by modularizing the process or defining appropriate coordination mechanisms...

Determination of Degree of Ionization of Poly(allylamine hydrochloride) (PAH) and Poly[1-[4-(3-carboxy-4 hydroxyphenylazo)benzene sulfonamido]-1,2-ethanediyl, sodium salt] (PAZO) in Layer-by-Layer Films using Vacuum Photoabsorption Spectroscopy

Electrostatic and hydrophobic interactions govern most of the properties of supramolecular systems, which is the reason determining the degree of ionization of macromolecules has become crucial for many applications. In this paper, we show that high-resolution ultraviolet spectroscopy (VUV) can be used to determine the degree of ionization and its effect on the electronic excitation energies of layer-by-layer (LbL) films of poly(allylamine hydrochloride) (PAH) and poly[1-[4-(3-carboxy-4 hydroxyphenylazo)benzene sulfonamido]-1,2-ethanediyl, sodium salt] (PAZO). A full assignment of the VUV peaks of these polyelectrolytes in solution and in cast or LbL films could be made, with their pH dependence allowing us to determine the pK(a) using the Henderson-Hasselbach equation. The pK(a) for PAZO increased from ca. 6 in solution to ca. 7.3 in LbL films owing to the charge transfer from PAH. Significantly, even using solutions at a fixed pH for PAH, the amount adsorbed on the LbL films still varied with the pH of the PAZO solutions due to these molecular-level interactions. Therefore, the procedure based on a comparison of VUV spectra from solutions and films obtained under distinct conditions is useful to determine the degree of dissociation of macromolecules, in addition to permitting interrogation of interface effects in multilayer films.

Polymeric scaffolds for enhanced stability of melanin incorporated in liposomes

The use of melanin in bioinspired applications is mostly limited by its poor stability in solid films. This problem has been addressed here by incorporating melanin into dipalmitoyl phosphatidyl glycerol (DPPG) liposomes, which were then immobilized onto a solid substrate as an LbL film. Results from steady-state and time-resolved fluorescence indicated an increased stability for melanin incorporated into DPPG liposomes. If not protected by liposomes, melanin looses completely its fluorescence properties in LbL films. The thickness of the liposome-melanin layer obtained from neutron reflectivity data was 4.1+/-0.2 nm, consistent with the value estimated for the phospholipid bilayer of the liposomes, an evidence of the collapse of most liposomes. On the other hand, the final roughness indicated that some of the liposomes had their structure preserved. In summary, liposomes were proven excellent for encapsulation, thus providing a suitable environment, closer to the physiological conditions without using organic solvents or high pHs.

Adsorption kinetics of DPPG liposome layers: a quantitative analysis of surface roughness.

Roughness of a positively charged poly(allylamine hydrochloride) (PAH) polyelectrolyte surface was shown to strongly influence the adsorption of 1.2-dipalmitoyl-sn-3-glycero-[phosphorrac-(1-glycerol)] (DPPG) liposomes on it. The adsorption kinetic curves of DPPG liposomes onto a low-roughness PAH layer reveal an adsorbed amount of 5 mg/m², pointing to liposome rupture, whereas a high-roughness surface leads to adsorbed amounts of 51 mg/m², signifying adsorption of intact liposomes. The adsorption kinetic parameters calculated from adsorption kinetic curves allow us to conclude that the adsorption process is due to electrostatic interactions and also depends on processes such as diffusion and reorganization of lipids on the surface. Analysis of the roughness kinetics enabled us to calculate a growth exponent of 0.19 ± 0.07 and a roughness exponent of around 0.84, revealing that DPPG liposomes adsorbed onto rough surfaces follow the Villain self-affine model. By relating self-affine surfaces with hydrophobicity, the liposome integrity was explained by the reduction in the number of water molecules on the PAH surface, contributing to counterion anchorage near PAH ionic groups, reducing the liposome/PAH layer electrostatic forces and, consequently, avoiding liposome rupture.

Energy Thresholds of DNA Damage Induced by UV Radiation: An XPS Study

This work stresses on damage at the molecular level caused by ultraviolet radiation (UV) in the range from 3.5 to 8 eV, deoxyribonucleic acid (DNA) films observed by X-ray photoelectron spectroscopy (XPS). Detailed quantitative XPS analysis, in which all the amounts are relative to sodium-assumed not to be released from the samples, of the carbon, oxygen, and particularly, nitrogen components, reveals that irradiation leads to sugar degradation with CO-based compounds release for energies above 6.9 eV and decrease of nitrogen groups which are not involved in hydrogen bonding at energies above 4.2 eV. Also the phosphate groups are seen to decrease to energies above 4.2 eV. Analysis of XPS spectra allowed to conclude that the damage on bases peripheral nitrogen atoms are following the damage on phosphates. It suggests that very low kinetic energy photoelectrons are ejected from the DNA bases, as a result of UV light induced breaking of the phosphate ester groups which forms a transient anion with resonance formation and whereby most of the nitrogen DNA peripheral groups are removed. The degree of ionization of DNA was observed to increase with radiation energy, indicating that the ionized phosphate groups are kept unchanged. This result was interpreted by the shielding of phosphate groups caused by water molecules hydration near sodium atoms.

Probing radiation damage by alternated current conductivity as a method to characterize electron hopping conduction in DNA molecules

Analysis of AC electrical conductivity of deoxyribonucleic acid (DNA) thin films, irradiated with ultraviolet (UV) light, revealed that electrical conduction arises from DNA chain electron hopping between base-pairs and phosphate groups. The hopping distance calculated from correlated barrier hopping model equals the distance between DNA base-pairs, which is consistent with the loss of conductivity with irradiation time arising from a decrease in phosphates groups. In the high frequency regime, at a given frequency, real part of conductivity strongly depends on irradiation time particularly for low dose levels suggesting the use of DNA based films for UV radiation sensors.

Characterization of PAH/DPPG layer-by-layer films by VUV spectroscopy

The spectroscopic characterization of layer-by-layer (LbL) films containing liposomes is essential not only for determining the precise film architecture but also to guide the design of drug delivery systems. In this study we provide the first report of vacuum ultraviolet spectroscopy (VUV) characterization of LbL films made with liposomes from 1.2-dipalmitoyl-sn-Glycero-3-[Phospho-rac-(1-glycerol)] (Sodium Salt) (DPPG) alternated with poly(allylamine hydrochloride) (PAH). Measurements in the 6.0–9.5eV range allowed us to identify the electronic transitions responsible for the spectra, which were assigned to carboxyl, hydroxyl and phosphate groups in DPPG while the PAH spectra were governed by electronic transitions in the amino groups. The surface mass density of the LbL films could be determined, from which the formation of a DPPG bilayer was inferred. This rupture of the liposomes into bilayers was confirmed with atomic force microscopy measurements. In subsidiary experiments we ensured that the UV irradiation in vacuum had negligible damage in the DPPG liposomes during the course of the VUV measurements. In addition to demonstrating the usefulness of VUV spectroscopy, the results presented here may be exploited in biological applications of liposome-containing films.Graphical abstract

Radiation damage on Langmuir monolayers of the anionic 1.2-dipalmitoyl-sn-glycero-3-[phospho-rac-(1-glycerol)] (sodium salt)(DPPG) phospholipid at the air–DNA solution interface

The resilience of cells to ultraviolet (UV) irradiation is probably associated with the effects induced in biological molecules such as DNA and in the cell membrane. In this study, we investigated UV damage to the anionic 1.2-dipalmitoyl-sn-glycero-3-[phospho-rac-(1-glycerol)] (sodium salt) (DPPG) phospholipid, which is an important component of cell membranes. In films cast from DPPG emulsions, UV irradiation induced cleavage of C-O, C=O and -PO(2-) bonds, while in Langmuir monolayers at the air/water interface representing the cell membrane this irradiation caused the monolayer stability to decrease. When DNA was present in the subphase, however, the effects from UV irradiation were smaller, since the ionic products from degradation of either DPPG or DNA stabilize the intact DPPG molecules. This mechanism may explain why UV irradiation does not cause immediate cell collapse, thus providing time for the cellular machinery to repair elements damaged by UV.

Biomimetic Heterostructures for Radiation Damage Studies

The present work describes a methodology that can be used for the creation of biomimetic membranes based in sequential assembling of biological molecules, to be used for radiation damage studies in an environment mimicking that of bio‐systems. The major features of the method, the so called layer‐by‐layer technique, as well as the experimental parameters to take into account for heterostructures production are summarized here. Results for radiation damage in DNA containing biomimetic membranes prepared from different conditions methods revealed that the radiation induced damage is dependent on the heterostructure molecular composition, proving that the environment is of extreme importance for the extent of radiation induced damage in biological molecules.

Photoabsorption of biomolecules and radiation damage – studies in adenine films

The Layer-by-Layer (LbL) technique has recently been developed as a promising method for production of thin films functional molecular heterostructures since the interactions occurring, essentially ionic and hydrogen bonding patterns, are found to be identical to those observed in biological systems. Such films have been shown to be also potentially good mimics of biological membranes. Also, it is possible that a study of biological relevant molecules assembled in LbL films will provide a closer analogue to their role in cellular systems. Thin films of adenine (A) and the polyelectrolyte poly(vinylsulfonic acid sodium salt) (PVS), were prepared by cast and Layer-by-layer (LbL) techniques. In this article, the experimental results on the UV irradiation of adenine cast films are described and the effect of 140 nm irradiation, with an estimated dose of about 8.5 × 10−4 W/m2, is evaluated at the molecular level.