Paulo Pinto
Universidade Nova de Lisboa
Network
Latest external collaboration on country level. Dive into details by clicking on the dots.
Publication
Featured researches published by Paulo Pinto.
IEEE Transactions on Wireless Communications | 2009
Rui Dinis; Paulo Montezuma; Luis Bernardo; Rodolfo Oliveira; Miguel P. Pereira; Paulo Pinto
The traditional approach to cope with collisions is to discard the packets involved in it and to ask for their retransmission. However, since the signal associated to a collision has important information concerning the packets involved, we can efficiently resolve collisions with proper retransmissions. In this paper we consider severely time-dispersive channels and we propose a technique that allows efficient packet separation. We employ SC-FDE schemes (single-carrier with frequency-domain equalization) and we propose an iterative frequency-domain multi-packet detection. Since our technique requires uncorrelated channels for different retransmissions, we also propose an SP technique (Shifted Packets) for retransmissions in fixed channels. Since the total number of transmissions is equal to the number of packets involved in the collision (even when the channel remains fixed for the retransmissions), our technique allows high throughputs. The analysis of our detection technique combined with the NMDA (network-assisted diversity multiple access) MAC (medium access control) protocol shows significant throughput and delay improvements for low Eb/N0 values compared to a TDMA (time division multiple access) approach, where collisions are avoided. This technique is particularly appealing for the uplink of broadband wireless systems, since we consider SC-FDE schemes and the complexity is concentrated in the receiver. By employing the SP scheme we can use the same channel for the retransmissions, with only a small performance degradation.
Computer Communications | 2009
Rodolfo Oliveira; Luis Bernardo; Paulo Pinto
The performance of the IEEE 802.11 protocol depends on multiple factors. One of them is related with the relative amounts of broadcast and unicast traffic in the total load due to the coexistence of the different transmission schemes applied to each of these types of traffic. This paper presents an analytical model to compute the 802.11 probability of a successful transmission of a frame and the average transmission delay assuming the presence of both unicast and broadcast traffic. Several realistic issues are addressed, as pre- and post-transmission backoffs, variable frame length and finite MAC buffers. Broadcast frame transmission has a swifter algorithm. When compared to broadcast, unicast frame transmission exhibits a more reliable scheme to avoid a frame from being discarded when it collides, but creates a trade off as it can introduce larger transmission delays. Simulation results are presented and compared to the analytical computations validating the models accuracy. Finally, interesting results related with the influence of the amount of broadcast or unicast traffic on the networks performance for non-saturation and saturation operating zones are discussed for different data transmission rates. This is particularly relevant as most of the ad hoc routing algorithms rely heavily on broadcast.
wireless communications and networking conference | 2010
Rodolfo Oliveira; Miguel Luis; Luis Bernardo; Rui Dinis; Paulo Pinto
Several routing protocols for Mobile Ad Hoc Networks (MANETS), including the well known Ad hoc On-Demand Distance Vector Routing (AODV) and Optimized Link State Routing (OLSR), propose the use of periodic messages (Hello messages) to detect neighbor nodes. After receiving the first Hello message from one of its neighbors, a node starts the link sensing task by setting up a sensing timer. Each time a new Hello message is received from the same neighbor, the sensing timer is restarted and the link duration is prolonged. If the sensing timer expires, it indicates a long time interval without receiving an Hello message and, consequently, the link is considered broken. The transmission frequency of the Hello messages and the expiration value of the sensing timer truly depends on nodes mobility: if the nodes are moving quickly and the Hello messages are rarely transmitted, the neighbor nodes can be in communication range but they are not detected; in the same scenario, if the expiration value of the sensing timer is too high, a link is sensed broken too late. In this paper, we consider a MANET under the Random Waypoint mobility model. We investigate the relationship between the transmission frequency of the Hello messages and the sensing timer expiration value with the network nodes mobility. We formally deduce the probability of link existence after
global communications conference | 2007
Rui Dinis; Paulo Carvalho; Luis Bernardo; Rodolfo Oliveira; Marco Serrazina; Paulo Pinto
\beta
Lecture Notes in Computer Science | 1998
Luis Bernardo; Paulo Pinto
periods of transmission of the Hello message. The probability is later used to define the sensing timer expiration value, considering a given probability that the Hello message transmission fails. Finally, we evaluate our study through both numerically analysis and simulations, which confirms the effectiveness and accuracy of our approach.
wireless communications and networking conference | 2007
Rodolfo Oliveira; Luis Bernardo; Paulo Pinto
Usually, packets involved in a collision are lost, requiring their retransmission. However, the signal associated to collisions has important information concerning the packets involved. In fact, with proper retransmissions we can efficiently resolve collisions. In this paper we propose a frequency-domain multi- packet detection technique for SC-FDE schemes (Single- Carrier with Frequency-Domain Equalization) that allows an efficient packet separation in the presence of successive collisions. This technique allows high throughputs, since the total number of transmissions is equal to the number of packets involved in the collision, even when the channel remains fixed for the retransmissions. Since we consider SC-FDE schemes and the complexity is concentrated in the receiver, this technique particularly appealing for the uplink of broadband wireless systems.
personal, indoor and mobile radio communications | 2006
Rodolfo Oliveira; Luis Bernardo; Paulo Pinto
Very large networks with thousands of applications and millions of users pose serious problems to the current traditional technology. Moreover, if synchronised client behaviour exists then the limitations are strongly felt. Mobile agent systems can be a suitable technology to answer to these requirements if some aspects of the architecture are carefully designed. This paper proposes a co-operative mobile agent system with a very dynamic and scalable trading service. The system allows applications to deploy servers onto the network to respond to demand making them self-configurable. Clients can also use mobile agents with performance gains. Sets of simulations were performed to study the scalability of the overall system.
wireless communications and networking conference | 2010
Miguel P. Pereira; Luis Bernardo; Rui Dinis; Rodolfo Oliveira; Paulo Carvalho; Paulo Pinto
The existing models for IEEE 802.11 DCF networks only consider unicast frames, ignoring the existence of broadcast traffic. In a real scenario, the stations are most of the times non-saturated and unicast and broadcast frames exist. These specific characteristics influence the service time which consequently affects the queue behaviour. In this paper, the authors model the total frames delay for IEEE 802.11 DCF networks in presence of both unicast and broadcast traffic. Our theoretical analysis proposes a model able to compute the time between the instant when a new frame is inserted on the transmission queue and the instant when its transmission finishes. The time needed to serve a frame (service time) is formally deduced from the IEEE 802.11 transmission procedure, conceptually using the view of one networks node. The authors use an M/M/1/K queue model in order to model each frames queueing delay. The authors validate the total frames delay using several simulations and present some results. These are analysed for different scenarios of broadcast/unicast network loads and different number of nodes.
vehicular technology conference | 2011
Francisco Ganhão; Rui Dinis; Luis Bernardo; Paulo Carvalho; Rodolfo Oliveira; Paulo Pinto
Most studies on performance of IEEE 802.11 DCF networks do not contemplate the existence of broadcast traffic. They model network behaviour in presence of unicast traffic alone. In a real scenario, broadcast frames exist, and they will influence the overall network behaviour. This work presents a new traffic generalized model for CSMA/CA saturated single-hop networks able to describe the network behaviour in presence of both unicast and broadcast frames. Interesting statistics like station transmission probability, average time needed to complete a frame transmission, and network aggregate throughput are deduced from the model. The paper compares the performance of our model with other models proposed only for unicast traffic. Our model is validated for broadcast and unicast traffic through simulations, using an IEEE 802.11 DCF network scenario. Results are presented and analysed for different scenarios of broadcast/unicast network loads, different number of nodes and different frame data lengths
Computer Communications | 2006
Paulo Pinto; Luis Bernardo; Pedro Sobral
This paper considers the use of SC modulations (Single-Carrier) with FDE (Frequency-Domain Equalization) with low-complexity soft combining ARQ schemes (Automatic Repeat reQuest). With our technique, packets associated to different transmission attempts are combined in a soft way, allowing improved performances. Its low complexity makes it particularly interesting for the uplink of wireless systems. This paper proposes an accurate analytical model for a TDMA (Time Division Multiple Access) scheme where packet combining ARQ is applied. It evaluates the uplink non-saturated packet delay and goodput for a generic message arrival process. Our analytical results are validated using physical and MAC layer simulations.