Pedro Debieux

A CT-based classification of prior ACL femoral tunnel location for planning revision ACL surgery

PurposeThe purposes of this study are to describe an ACL femoral tunnel classification system for use in planning revision ACL reconstruction based on 3-D computed tomography (CT) reconstructions and to evaluate its inter- and intra-rater reliability.MethodsA femoral tunnel classification system was developed based on the location of the femoral tunnel relative to the lateral intercondylar ridge. The femoral tunnel was classified as Type I if it was located entirely below and posterior to the ridge as viewed from distally, Type II if it was slightly malpositioned (either vertically, anteriorly, or both), and Type III if it was significantly malpositioned. To evaluate the reproducibility of the classification system, CT scans of 27 knees were obtained from patients scheduled for revision ACL reconstruction, and 3-D reconstructions were created. Four views of the 3-D reconstruction of each femur were then obtained, and inter- and intra-observer reliability was determined following classification of the tunnels by eight observers.ResultsTwenty-five tunnels were classified as Type I (5 tunnels), Type II (9 tunnels), or type III (11 tunnels) by at least 5 of 8 observers, while insufficient agreement was noted to classify two tunnels. The interobserver reliability of tunnel classification as type I, II, or III yielded a κ coefficient of 0.57, while intra-observer reliability yielded a κ coefficient of 0.67. Subclassification of type II femoral tunnels into the subgroups anterior, vertical, and both was possible in four of the nine type II patients. The interobserver reliability of the complete classification system yielded a κ coefficient of 0.50, while the intra-observer reliability yielded a κ coefficient of 0.54.ConclusionClassification of the location of ACL femoral tunnels utilizing 3-D reconstructions of CT data yields moderate to substantial inter- and intra-observer reliability.Level of evidenceDiagnostic Level III.

LESÕES DO APARELHO LOCOMOTOR NOS ACIDENTES COM MOTOCICLETA

Study conducted in the city of Sao Paulo from January 2001 to July 2002 with the goal of analyzing the profiles of individuals involved in motorcycle accidents, evaluating the riders profile, the circumstances of the accidents, injuries, and the use of protective gear. 387 patients needing only traumatic orthopedic treatment were found, between 16 and 44 years of age, of which 354 were males (91.0%). The most common mechanism of trauma involved a collision between the motorcycle and another vehicle (67.0%) at a speed between 12.5-37.5 mph (73.0%) involving less experienced riders (67.0%) between 21 and 24 years of age (45%), and in which 532 (53.9%) lower limb injuries occurred. Of the injuries, 393 (39.8%) were wounds, 314 (31.8%) were bruises and 212 (21.5%) were fractures [foot, 34 (16%); femur, 32 (15.1%); ankle, 27 (12.7%); tibia, 25 (11.8%)]. Recurring accidents were observed in 231 (60.0%) cases and only 6.0% of the riders were not using protective equipment. Increased speed showed a higher rate of fractures when the Mann-Whitney test was applied (p = 0.001). Research on mechanical and traffic engineering, in combination with supervision and awareness-raising of the population, should be considered the most effective methods of prevention.

Updates in biological therapies for knee injuries: menisci

The preservation of meniscal tissue is paramount for long-term joint function, especially in younger patients who are athletically active. Many studies have reported encouraging results following the repair of meniscus tears, including both simple longitudinal tears located in the periphery and complex multiplanar tears that extend into the central third avascular region. However, most types of meniscal lesions are managed with a partial meniscectomy. Options to restore the meniscus range from an allograft transplantation to the use of synthetic and biological technologies. Recent studies have demonstrated good long-term outcomes with meniscal allograft transplantation, although the indications and techniques continue to evolve, and the long-term chondroprotective potential of this approach has yet to be determined. Several synthetic implants, most of which are approved in the European market, have shown some promise for replacing part of or the entire meniscus, including collagen meniscal implants, hydrogels, and polymer scaffolds. Currently, there is no ideal implant generated by means of tissue engineering. However, meniscus tissue engineering is a fast developing field that promises to develop an implant that mimics the histologic and biomechanical properties of a native meniscus.

Identification of Suitable Reference Genes for Investigating Gene Expression in Anterior Cruciate Ligament Injury by Using Reverse Transcription-Quantitative PCR.

The anterior cruciate ligament (ACL) is one of the most frequently injured structures during high-impact sporting activities. Gene expression analysis may be a useful tool for understanding ACL tears and healing failure. Reverse transcription-quantitative polymerase chain reaction (RT-qPCR) has emerged as an effective method for such studies. However, this technique requires the use of suitable reference genes for data normalization. Here, we evaluated the suitability of six reference genes (18S, ACTB, B2M, GAPDH, HPRT1, and TBP) by using ACL samples of 39 individuals with ACL tears (20 with isolated ACL tears and 19 with ACL tear and combined meniscal injury) and of 13 controls. The stability of the candidate reference genes was determined by using the NormFinder, geNorm, BestKeeper DataAssist, and RefFinder software packages and the comparative ΔCt method. ACTB was the best single reference gene and ACTB+TBP was the best gene pair. The GenEx software showed that the accumulated standard deviation is reduced when a larger number of reference genes is used for gene expression normalization. However, the use of a single reference gene may not be suitable. To identify the optimal combination of reference genes, we evaluated the expression of FN1 and PLOD1. We observed that at least 3 reference genes should be used. ACTB+HPRT1+18S is the best trio for the analyses involving isolated ACL tears and controls. Conversely, ACTB+TBP+18S is the best trio for the analyses involving (1) injured ACL tears and controls, and (2) ACL tears of patients with meniscal tears and controls. Therefore, if the gene expression study aims to compare non-injured ACL, isolated ACL tears and ACL tears from patients with meniscal tear as three independent groups ACTB+TBP+18S+HPRT1 should be used. In conclusion, 3 or more genes should be used as reference genes for analysis of ACL samples of individuals with and without ACL tears.

Comprehensive selection of reference genes for expression studies in meniscus injury using quantitative real-time PCR

The meniscus plays critical roles in the knee function. Meniscal tears can lead to knee osteoarthritis. Gene expression analysis may be a useful tool for understanding meniscus tears, and reverse-transcription quantitative polymerase chain reaction (RT-qPCR) has become an effective method for such studies. However, this technique requires the use of suitable reference genes for data normalization. We evaluated the suitability of six reference genes (18S, ACTB, B2M, GAPDH, HPRT1 and TBP) using meniscus samples of (1) 19 patients with isolated meniscal tears, (2) 20 patients with meniscal tears and combined anterior cruciate ligament injury (ACL), and (3) 11 controls without meniscal tears. The stability of the candidate reference genes was determined using the NormFinder, geNorm, BestKeeper DataAssist and RefFinder software packages and comparative ΔCt method. Overall, HPRT1 was the best single reference gene. However, GenEx software demonstrated that two or more reference genes should be used for gene expression normalization, which was confirmed when we evaluated TGFβR1 expression using several reference gene combinations. HPRT1+TBP was the most frequently identified pair from the analysis of samples of (1) meniscal tear samples of patients with a concomitant ACL tears, (2) all meniscal tears, and (3) all samples. HPRT1+GAPDH was the most frequently identified pair from the analysis of samples of isolated meniscal tear samples and controls. In the analysis involving only controls, GAPDH+18S was the most frequently identified pair. In the analysis of only isolated meniscal tear samples and in the analysis of meniscal tear samples of patients with concomitant ACL tears and controls, both HPRT1+TBP and HPRT1+GAPDH were identified as suitable pairs. If the gene expression study aims to compare non-injured meniscus, isolated meniscal tears and meniscal tears of patients with ACL tears as three independent groups, the trio of HPRT1+TBP+GAPDH is the most suitable combination of reference genes.

Knee isokinetic performance following anterior cruciate ligament reconstruction: patellar tendon versus hamstrings graft

ABSTRACT Objective: To compare knee isokinetic performance six months after reconstruction of the anterior cruciate ligament using grafts from either the patellar tendon or the hamstrings among patients who underwent the same rehabilitation protocol. Methods: Thirty-four patients were evaluated (17 with grafts from the patellar tendon and 17 with grafts from the hamstrings). Operated and non-operated knees were compared with regards to the variables of peak torque, work and the hamstring/quadriceps relationship at velocities of 60º/s and 180º/s and power of 180º/s after six months of surgery. Results: The patients with ACL reconstruction using the patellar tendon (BPTB) showed quadriceps deficits for all variables, but the flexor musculature was balanced. In the hamstring group, both the extensors and the flexors showed deficits for the variables analyzed, except for hamstring power at 180º/s. Conclusion: Patients in the patellar tendon group had a greater quadriceps deficit compared with those in the hamstrings group. Patients in the hamstrings group had a greater muscular deficit in the flexor mechanism compared with the contralateral knee. An unbalanced H/Q ratio was observed regardless of graft type, but this was more evident in the BPTB group.

Anterior cruciate ligament - updating article

This updating article on the anterior cruciate ligament (ACL) has the aim of addressing some of the most interesting current topics in this field. Within this stratified approach, it contains the following sections: ACL remnant; anterolateral ligament and combined intra and extra-articular reconstruction; fixation devices; and ACL femoral tunnel creation techniques.

Is it safe the empirical distal femoral resection angle of 5 to 6 of valgus in the Brazilian geriatric population

Objective The purpose of this study is to determine if there is a safe distal femoral resection angle to restore the normal axial alignment of the limb in total knee arthroplasty (TKA) in the Brazilian geriatric population with knee arthrosis. Method This study analyzed 99 pre-operative hip-knee-ankle radiographs of osteoarthritic knees of 66 patients (54 women, 12 men) with knee osteoarthritis. The distal femoral cut angle was determined based on the femoral mechanical-anatomical angle (FMA). Mean, median and standard deviation measurements of the distal femoral cut angle were calculated, differentiated by gender and side. The mean result of the distal femoral resection angle was compared to 5.7°, the mean average angle of previous and similar study based on European population of patients with knee arthrosis. Results The mean average of the distal femoral resection angle of the study was 6.05 (range 3–9°). The distribution of this angle between genders showed a slight superior average of the male population (6.17°) compared to the female (6.02°), but with no statistically significant difference (p = 0.726). There was no statistically significant difference (p = 0.052) between the mean average of this study (6.05°) compared to the mean average of the literature (5.7°). However, considering 3° as the limit of acceptable error in the coronal plane, this empirical femoral resection angle would not be appropriated for 19.7% of the population. Conclusion The distal femoral resection angle of 5–6° is not completely safe for the Brazilian geriatric population.

Anterior cruciate ligament and meniscal injuries in sports: incidence, time of practice until injury, and limitations caused after trauma ☆

Objective To analyze the incidence of ACL and meniscal injuries in a population of recreational and elite athletes from Brazil and the relation of these injuries with their sports activities. Methods This was a prospective observational study of 240 patients with ACL and/or meniscal injuries submitted to surgical treatment. Data of patients and sport modality, as well as Tegner score were registered in the first clinical evaluation. The patients were divided into three groups: (1) isolated rupture of the ACL; (2) ACL injury associated with meniscal injury; (3) isolated menisci injury. Results The majority of the patients belonged to group 1 (44.58%), followed by group 2 (30.2%) and 3 (25%). Most patients were soccer players. The mean time from sport practice to injury in group 1 was 17.81 years. In group 2, it was 17.3 years, and in group 3, 26.91 years. Soccer athletes presented ACL injury in 0.523/1000 h of practice and meniscal injury in 0.448/1000 h of practice. Before the injury, the mean Tegner score obtained for groups 1, 2, and 3 were 7.18, 7.34, and 6.53, respectively. After knee injury, those values were 3.07, 3.18, and 2.87, respectively. Conclusion Soccer was the sport that caused the majority of lesions, regardless the group. Furthermore, patients from groups 1 and 2 had less time of practice prior to the injury (17.81 and 17.3 years) than the patients of group 3 (26.91 years). Women presented a higher risk to develop ACL and meniscal injuries in 1000 h of game/practice. Running, volleyball, and weightlifting are in ascending order of risk for ACL and/or meniscal injury. Regarding the return to sport practice, the efficiency of all athletes was impaired because of the injury.

Total knee arthroplasty with computer-assisted navigation: an analysis of 200 cases,

Objective to evaluate the results from surgery with computer-assisted navigation in cases of total knee arthroplasty. Method a total of 196 patients who underwent total knee arthroplasty with computer-assisted navigation were evaluated. The extension and flexion spaces (gaps) were evaluated during the operation and the alignment after the operation was assessed. The Knee Society Score (KSS) questionnaire for assessing patients function was applied preoperatively and postoperatively after a mean follow-up of 22 months. Results in all, 86.7% of the patients presented good alignment of the mechanical axis (less than 3° of varus or valgus in relation to the mechanical axis) and 96.4% of the patients presented balanced flexion and extension gaps. Before the operation, 97% of the patients presented poor or insufficient KSS, but after the operation, 77.6% presented good or excellent KSS. Conclusion the navigation system made it possible to achieve aligned and balanced implants, with notable functional improvement among the patients. It was found to be useful in assessing, understanding and improving knowledge in relation to performing arthroplasty procedures.