Peng Hong Liem

Neutronic and thermal hydraulic design of the graphite moderated helium-cooled high flux reactor

Abstract A new design concept for a high flux reactor was investigated, where a graphite moderated helium-cooled reactor with pebble fuel elements containing ( 235 U, 238 U)O 2 TRISO coated particles was taken as its design base. The reactor consists of an annular pebble bed core, a central heavy water region, and inner, outer, top, and bottom graphite reflectors. The maximum thermal neutron flux in its central heavy water region as high as 10 15 cm −2 s −1 with thermal neutron spectral purity of more than two orders of magnitude and a large usable volume of more than 1,000 liters can be achieved by (1) diluting the fissile material in the core and (2) optimizing the core-reflector configuration. The in-core thermal-hydraulic analysis was done to obtain adequate information about the coolant flow pattern and pressure distribution, core temperature profile, as well as other safety aspects of the design. To protect the reactor during off-normal or accident events, a large margin of temperature difference between the operating fuel temperature and the fuel limit temperature is confirmed by lowering the coolant inlet and core rise temperatures.

The Verification of Coupled Neutronics Thermal-Hydraulics Code NODAL3 in the PWR Rod Ejection Benchmark

A coupled neutronics thermal-hydraulics code NODAL3 has been developed based on the few-group neutron diffusion equation in 3-dimensional geometry for typical PWR static and transient analyses. The spatial variables are treated by using a polynomial nodal method while for the neutron dynamic solver the adiabatic and improved quasistatic methods are adopted. In this paper we report the benchmark calculation results of the code against the OECD/NEA CRP PWR rod ejection cases. The objective of this work is to determine the accuracy of NODAL3 code in analysing the reactivity initiated accident due to the control rod ejection. The NEACRP PWR rod ejection cases are chosen since many organizations participated in the NEA project using various methods as well as approximations, so that, in addition to the reference solutions, the calculation results of NODAL3 code can also be compared to other codes’ results. The transient parameters to be verified are time of power peak, power peak, final power, final average Doppler temperature, maximum fuel temperature, and final coolant temperature. The results of NODAL3 code agree well with the PHANTHER reference solutions in 1993 and 1997 (revised). Comparison with other validated codes, DYN3D/R and ANCK, shows also a satisfactory agreement.

Conceptual design of a new homogeneous reactor for medical radioisotope Mo-99/Tc- 99m production

To partly solve the global and regional shortages of Mo-99 supply, a conceptual design of a nitrate-fuel-solution based homogeneous reactor dedicated for Mo-99/Tc-99m medical radioisotope production is proposed. The modified LEU Cintichem process for Mo-99 extraction which has been licensed and demonstrated commercially for decades by BATAN is taken into account as a key design consideration. The design characteristics and main parameters are identified and the advantageous aspects are shown by comparing with the BATANs existing Mo-99 supply chain which uses a heterogeneous reactor (RSG GAS multipurpose reactor).

Design study of graphite moderated gas-cooled high flux reactor

A feasibility design study of the graphite moderated gas-cooled reactor as a high flux reactor has been performed. The core of the reactor is equipped with two graphite reflectors, i.e. the inner reflector and the outer reflector. The highest value of the thermal neutron flux is expected to be achieved in the inner reflector region, and a moderately high thermal neutron flux is also expected to be obtained in the outer reflector region. By choosing optimal values of the core-reflector geometrical parameters and moderator-to-fuel atomic density, a high thermal neutron flux can be obtained. Because of the thermal design constraint, however, this design will produce a relatively large core volume (about 107 cm3) and consequently a higher reactor power (100 MWth). Preliminary calculational results show that with an average power density of 10 W/cm3, a maximum thermal neutron flux of 1015 cm−2 s−1 can be achieved in the inner reflector.

NODAL3 Sensitivity Analysis for NEACRP 3D LWR Core Transient Benchmark (PWR)

This paper reports the results of sensitivity analysis of the multidimension, multigroup neutron diffusion NODAL3 code for the NEACRP 3D LWR core transient benchmarks (PWR). The code input parameters covered in the sensitivity analysis are the radial and axial node sizes (the number of radial node per fuel assembly and the number of axial layers), heat conduction node size in the fuel pellet and cladding, and the maximum time step. The output parameters considered in this analysis followed the above-mentioned core transient benchmarks, that is, power peak, time of power peak, power, averaged Doppler temperature, maximum fuel centerline temperature, and coolant outlet temperature at the end of simulation (5 s). The sensitivity analysis results showed that the radial node size and maximum time step give a significant effect on the transient parameters, especially the time of power peak, for the HZP and HFP conditions. The number of ring divisions for fuel pellet and cladding gives negligible effect on the transient solutions. For productive work of the PWR transient analysis, based on the present sensitivity analysis results, we recommend NODAL3 users to use radial nodes per assembly, axial layers per assembly, the maximum time step of 10 ms, and 9 and 1 ring divisions for fuel pellet and cladding, respectively.

Analysis of NEA-NSC PWR Uncontrolled Control Rod Withdrawal at Zero Power Benchmark Cases with NODAL3 Code

The in-house coupled neutronic and thermal-hydraulic (N/T-H) code of BATAN (National Nuclear Energy Agency of Indonesia), NODAL3, based on the few-group neutron diffusion equation in 3-dimensional geometry using the polynomial nodal method, has been verified with static and transient PWR benchmark cases. This paper reports the verification of NODAL3 code in the NEA-NSC PWR uncontrolled control rods withdrawal at zero power benchmark. The objective of this paper is to determine the accuracy of NODAL3 code in solving the continuously slow and fast reactivity insertions due to single and group of control rod bank withdrawn while the power and temperature increment are limited by the Doppler coefficient. The benchmark is chosen since many organizations participated using various methods and approximations, so the calculation results of NODAL3 can be compared to other codes’ results. The calculated parameters are performed for the steady-state, transient core averaged, and transient hot pellet results. The influence of radial and axial nodes number was investigated for all cases. The results of NODAL3 code are in very good agreement with the reference solutions if the radial and axial nodes number is 2 × 2 and 2 × 18 (total axial layers), respectively.

Analysis of the optimal fuel composition for the Indonesian experimental power reactor

Abstract The optimal fuel composition of the 10 MWth Experimental Power Reactor (RDE), to be built by the Indonesian National Nuclear Energy Agency (BATAN), is a very important design parameter since it will directly affect the fuel cost, new and spent fuel storage capacity, and other back-end environmental burden. The RDE is a very small sized pebble-bed high temperature gas-cooled reactor (HTGR) with low enriched uranium (LEU) UO2 TRISO fuel under multipass or once-through-then-out fueling scheme. A scoping study on fuel composition parameters, namely heavy metal (HM) loading per pebble and uranium enrichment is conducted. All burnup, criticality calculations and core equilibrium search are carried out by using BATAN-MPASS, a general in-core fuel management code for pebble bed HTGRs, featured with many automatic equilibrium searching options as well as thermal-hydraulic calculation capability. The RDE User Requirement Document issued by BATAN is used to derive the main core design parameters and constraints. The scoping study is conducted over uranium enrichment in the range of 10 to 20 w/o and HM loading in the range of 4 g to 10 g/pebble. Fissile loading per unit energy generated (kg/GWd) is taken as the objective function for the present scoping study. The analysis results show that the optimal HM loading is around 8 g/pebble. Under the constraint of 80 GWd/t fuel discharge burnup imposed by the technical specification, the uranium enrichment for the optimal HM loading is approximately 13 w/o.