Pengju Lei

New bipolar electrocoagulation–electroflotation process for the treatment of laundry wastewater

A new bipolar electrocoagulation and electroflotation process was developed to treat laundry wastewater. In this new process, electrocoagulation and electroflotation were carried out simultaneously in a single reactor. The operating parameters such as initial pH, hydraulic residence time (HRT) and current density were investigated. The unique design of the reactor made it possible for the effective removal of turbidity, COD, phosphate and surfactant (MBAS) in a wide pH range (5–9) at a short HRT (5–10 min). The pilot scale tests (1.5 m3/h) were carried out successfully in three different places suggested that the bipolar electrocoagulation–electroflotation process was feasible for the treatment of laundry wastewater.

Using the combined bioelectrochemical and sulfur autotrophic denitrification system for groundwater denitrification

A combined bioelectrochemical and sulfur autotrophic denitrification system (CBSAD) was evaluated to treat a groundwater with nitrate contamination (20.9-22.0mgNO(3)(-)-N/L). The reactor was operated continuously for several months with groundwater to maximize treatment efficiency under different hydraulic retention times (HRT) and electric currents. The denitrification rate of sulfur autotrophic part followed a half-order kinetics model. Moreover, the removal efficiency of bioelectrochemical part depended on the electric current. The reactor could be operated efficiently at the HRT ranged from 4.2 to 2.1h (corresponding nitrogen volume-loading rates varied from 0.12 to 0.24 kg N/m(3)d; and optimum current ranged from 30 to 1000 mA), and the NO(3)(-)-N removal rate ranged from 95% to 100% without NO(3)(-)-N accumulation. The pH of effluent was satisfactorily adjusted by bioelectrochemical part, and the sulfate concentration of effluent was lower than 250 mg/L, meeting the drinking water standard of China EPA.

Electro-photocatalytic degradation of acid orange II using a novel TiO2/ACF photoanode.

A novel photoanode was prepared by immobilizing TiO(2) film onto activated carbon fibers (TiO(2)/ACF) using liquid phase deposition (LPD) to study the electro-photocatalytic (EPC) degradation of organic compounds exemplified by an azo-dye, namely, Acid Orange II (AOII). Results demonstrated that by applying a 0.5 V bias (vs. SCE) across the TiO(2)/ACF electrode, the AOII degradation rate was increased significantly compared to that of photocatalytic (PC) oxidation. The application of an electric field promotes the separation of photogenerated electrons and holes as confirmed by electrochemical impedance spectroscopy (EIS) measurements. The structural and surface morphology of the TiO(2)/ACF electrode was characterized by field emission scanning electron microscopy (FE-SEM) and X-ray diffraction (XRD). SEM images showed that TiO(2) was deposited on almost every carbon fiber with an average thickness of about 200 nm with the inner space between neighboring fibers being maintained unfilled. The morphological features of the photo-anode facilitated the passage of solution as well as UV light through the felt-form electrode and created a three-dimensional environment favorable to EPC oxidation. Both the large outer surface area of the 3D electrode and the good organic adsorption capacity of the ACF support promoted high contact efficiency between AOII and TiO(2) surface. Anatase was the major crystalline TiO(2) deposited. UV-vis spectrophotometry, TOC (total organic carbon) analysis, and HPLC technique were used to monitor the concentration change of AOII and intermediates as to gain insight into the EPC degradation of AOII using the TiO(2)/ACF electrode.

Practical performance and its efficiency of arsenic removal from groundwater using Fe-Mn binary oxide

A treatment unit packed by granular adsorbent of Fe-Mn binary oxide incorporated into diatomite (FMBO(1:1)-diatomite) was studied to remove arsenic from anaerobic groundwater without any pre-treatment or post-treatment. The raw anaerobic groundwater containing 35-45 microg/L of arsenic was collected from suburb of Beijing. Arsenic (III) constituted roughly 60%-80% of the total arsenic content. Approximately 7,000 bed volumes (ratio of effluent volume to adsorbent volume) treated water with arsenic concentration below 10 microg/L were produced in the operation period of four months. The regeneration of FMBO (1:1)-diatomite had been operated for 15 times. In the first stage, the regeneration process significantly improved the adsorption capacity of FMBO (1:1)-diatomite. With increased loading amount of Fe-Mn binary oxide, the adsorption capacity for arsenic decreased 20%-40%. Iron and manganese in anaerobic groundwater were oxidized and adsorptive filtrated by FMBO (1:1)-diatomite efficiently. The final concentrations of iron and manganese in effluents were nearly zero. The continued safe performance of the treatment units proved that adsorbent FMBO (1:1)-diatomite had high oxidation ability and exhibited strong adsorptive filtration.