Pennathur Gautam

Activation of Candida rugosa lipase at alkane–aqueous interfaces: A molecular dynamics study

The effect of solvent hydrophobicity on activation of Candida rugosa lipase (CRL) was investigated by performing molecular dynamics simulations for four nano seconds (ns). The closed/inactive conformer of CRL (PDB code 1TRH) was solvated in three alkane–aqueous environments. The alkanes aggregated in a predominantly aqueous environment and by 1 ns a stable spherical alkane–aqueous interface had formed. This led to the interfacial activation of CRL. On analyzing the simulated conformers with the closed conformer of CRL, the flap was found to have opened from a closed state by 7.7 Å, 10.2 Å, 13.1 Å at hexane–aqueous, octane–aqueous, and decane–aqueous interfaces. Further, essential dynamics analysis revealed that major anharmonic fluctuations were confined to residues 64–81, the flap of CRL.

Functionally specified protein signatures distinctive for each of the different blue copper proteins.

BackgroundProteins having similar functions from different sources can be identified by the occurrence in their sequences, a conserved cluster of amino acids referred to as pattern, motif, signature or fingerprint. The wide usage of protein sequence analysis in par with the growth of databases signifies the importance of using patterns or signatures to retrieve out related sequences. Blue copper proteins are found in the electron transport chain of prokaryotes and eukaryotes. The signatures already existing in the databases like the type 1 copper blue, multiple copper oxidase, cyt b/b6, photosystem 1 psaA&B, psaG&K, and reiske iron sulphur protein are not specified signatures for blue copper proteins as the name itself suggests. Most profile and motif databases strive to classify protein sequences into a broad spectrum of protein families. This work describes the signatures designed based on the copper metal binding motifs in blue copper proteins. The common feature in all blue copper proteins is a trigonal planar arrangement of two nitrogen ligands [each from histidine] and one sulphur containing thiolate ligand [from cysteine], with strong interactions between the copper center and these ligands.ResultsSequences that share such conserved motifs are crucial to the structure or function of the protein and this could provide a signature of family membership. The blue copper proteins chosen for the study were plantacyanin, plastocyanin, cucumber basic protein, stellacyanin, dicyanin, umecyanin, uclacyanin, cusacyanin, rusticyanin, sulfocyanin, halocyanin, azurin, pseudoazurin, amicyanin and nitrite reductase which were identified in both eukaryotes and prokaryotes. ClustalW analysis of the protein sequences of each of the blue copper proteins was the basis for designing protein signatures or peptides. The protein signatures and peptides identified in this study were designed involving the active site region involving the amino acids bound to the copper atom. It was highly specific for each kind of blue copper protein and the false picks were minimized. The set of signatures designed specifically for the BCPs was entirely different from the existing broad spectrum signatures as mentioned in the background section.ConclusionsThese signatures can be very useful for the annotation of uncharacterized proteins and highly specific to retrieve blue copper protein sequences of interest from the non redundant databases containing a large deposition of protein sequences.

Biocatalytic production of D-tagatose: A potential rare sugar with versatile applications

ABSTRACT D-tagatose is a naturally existing rare monosaccharide having prebiotic properties. Minimal absorption, low metabolizing energy, and unique clinical properties are the characteristics of D-tagatose. D-tagatose gained international attention by matching the purpose of alternate sweeteners that is much needed for the control of diabetes among world population. Recent efforts in understanding tagatose bioconversion have generated essential information regarding its production and application. This article reviews the evolution of D-tagatose as an important rare sugar by appreciable improvements in production results and its significant applications resulted of its unique physical, chemical, biological, and clinical properties thus considering it an appropriate product for requisite improvements in technical viability. Based on current knowledge and technology projections, the commercialization of D-tagatose rare sugar as food additive is close to reality.

Process optimization for production and purification of a thermostable, organic solvent tolerant lipase from Acinetobacter sp. AU07

The purpose of this study was to isolate, purify and optimize the production conditions of an organic solvent tolerant and thermostable lipase from Acinetobacter sp. AU07 isolated from distillery waste. The lipase production was optimized by response surface methodology, and a maximum production of 14.5 U/mL was observed at 30 °C and pH 7, using a 0.5% (v/v) inoculum, 2% (v/v) castor oil (inducer), and agitation 150 rpm. The optimized conditions from the shake flask experiments were validated in a 3 L lab scale bioreactor, and the lipase production increased to 48 U/mL. The enzyme was purified by ammonium sulfate precipitation and ion exchange chromatography and the overall yield was 36%. SDS-PAGE indicated a molecular weight of 45 kDa for the purified protein, and Matrix assisted laser desorption/ionization time of flight analysis of the purified lipase showed sequence similarity with GDSL family of lipases. The optimum temperature and pH for activity of the enzyme was found to be 50 °C and 8.0, respectively. The lipase was completely inhibited by phenylmethylsulfonyl fluoride but minimal inhibition was observed when incubated with ethylenediaminetetraacetic acid and dithiothreitol. The enzyme was stable in the presence of non-polar hydrophobic solvents. Detergents like SDS inhibited enzyme activity; however, there was minimal loss of enzyme activity when incubated with hydrogen peroxide, Tween 80 and Triton X-100. The kinetic constants (Km and Vmax) revealed that the hydrolytic activity of the lipase was specific to moderate chain fatty acid esters. The Vmax, Km and Vmax/Km ratio of the enzyme were 16.98 U/mg, 0.51 mM, and 33.29, respectively when 4-nitrophenyl palmitate was used as a substrate.

Molecular Basis for the Stereospecificity of Candida Rugosa Lipase (Crl) Towards Ibuprofen

The stereospecific esterification of ibuprofen by Candida rugosa lipase (CRL) with 1-butanol was optimised. The yield of the butyl ester was nearly quantitative with an enantiomeric excess of 95% and E 100. Enzyme desiccation over P2O5 had a pronounced effect on the esterification yield and its role in stereospecificity is discussed. Molecular modelling and energy-minimisation studies were also performed to understand the stereospecific binding of substrates to the active site of CRL. The docking of the substrate S(+) ibuprofen to the active site of CRL was performed based on the three-dimensional structure of CRL (PDB entry 1CRL). The results show that only the active S(+) enantiomer of ibuprofen is able to form direct contacts with the reactive hydroxyl group (Ser209) and imidazole base (His449) at the active site, whereas with the R enantiomer the functional group COOH points away from the (His449) base of CRL. This is in accordance with experimental results which show that the stereospecifity of CRL is towards S(-) ibuprofen.

d-Tagatose production by permeabilized and immobilized Lactobacillus plantarum using whey permeate

The aim of the work is to produce d-Tagatose by direct addition of alginate immobilized Lactobacillus plantarum cells to lactose hydrolysed whey permeate. The cells were untreated and immobilized (UIC), permeabilized and immobilized (PIC) and the relative activities were compared with purified l-arabinose isomerase (l-AI) for d-galactose isomerization. Successive lactose hydrolysis by β-galactosidase from Escherichia coli and d-galactose isomerization using l-AI from Lactobacillus plantarum was performed to investigate the in vivo production of d-tagatose in whey permeate. In whey permeate, maximum conversion of 38% and 33% (w/w) d-galactose isomerization by PIC and UIC has been obtained. 162mg/g and 141mg/g of d-tagatose production was recorded in a 48h reaction time at 50°C, pH 7.0 with 5mM Mn2+ ion concentration in the initial substrate mixture.

Blue native electrophoresis study on lipases

We have developed a modified blue native polyacrylamide gel electrophoresis (PAGE) protocol that can overcome aggregation of lipases seen in native PAGE. We have shown that two lipases, Pseudomonas aeruginosa lipase and Candida rugosa lipase, which aggregate in the native gel, can be resolved using our protocol. Activity staining was done to test for the functionality of the two lipases.

Nanoscale investigation on Pseudomonas aeruginosa biofilm formed on porous silicon using atomic force microscopy

Colonization of surfaces by bacterial cells results in the formation of biofilms. There is a need to study the factors that are important for formation of biofilms since biofilms have been implicated in the failure of semiconductor devices and implants. In the present study, the adhesion force of biofilms (formed by Pseudomonas aeruginosa) on porous silicon substrates of varying surface roughness was quantified using atomic force microscopy (AFM). The experiments were carried out to quantify the effect of surface roughness on the adhesion force of biofilm. The results show that the adhesion force increased from 1.5 ± 0.5 to 13.2 ± 0.9 nN with increase in the surface roughness of silicon substrate. The results suggest that the adhesion force of biofilm is affected by surface roughness of substrate.

In-gel staining of proteins in native poly acryl amide gel electrophoresis using tetrakis(4-sulfonato phenyl)porphyrin.

Protein identification in polyacrylamide gel electrophoresis (PAGE) requires post-electrophoretic steps like fixing, staining and destaining of the gel, which are time-consuming and cumbersome. We have developed a method for direct visualization of protein bands in PAGE using tetrakis(4-sulfonato phenyl)porphyrin (TPPS) as a dye without the need for any post electrophoretic steps, where separation and recovery of enzymes become much easier for further analysis. Activity staining was done to prove that the biochemical activity of the enzymes was preserved after electrophoresis.

GLOBAL METAL-ION BINDING PROTEIN FINGERPRINT: A METHOD TO IDENTIFY MOTIF-LESS METAL-ION BINDING PROTEINS

Metal-ion binding proteins play a vital role in biological processes. Identifying putative metal-ion binding proteins is through knowledge-based methods. These involve the identification of specific motifs that characterize a specific class of metal-ion binding protein. Metal-ion binding motifs have been identified for the common metal ions. A robust global fingerprint that is useful in identifying a metal-ion binding protein from a non-metal-ion binding protein has not been devised. Such a method will help in identifying novel metal-ion binding proteins and proteins that do not possess a canonical metal-ion binding motif. We have used a set of physico-chemical parameters of metal-ion binding proteins encoded by the genes CzcA, CzcB and CzcD as a training set to supervised classifiers and have been able to identify several other metal ion binding proteins leading us to believe that metal-ion binding proteins have a global fingerprint, which cannot be pinned down to a single feature of the protein sequence.