Percy Milleding

Fracture resistance of monolithic zirconia molar crowns with reduced thickness

Abstract Objectives. The purpose of the present study was to analyze the relationship between fracture load of monolithic zirconia crowns and axial/occlusal thickness and to evaluate the fracture resistance of monolithic zirconia crowns with reduced thickness in comparison with that of monolithic lithium disilicate crowns with regular thickness. Materials and methods. Monolithic zirconia crowns (Lava Plus Zirconia, 3M/ESPE) with specified axial/occlusal thicknesses and lithium disilicate crowns (IPS e.max press, Ivoclar/Vivadent) with regular thickness were fabricated using a dental CAD/CAM system and a press technique, respectively. The crowns cemented onto dies were loaded until fracture. Based on measurements of the crown thickness made by micro-CT and the fracture load, multiple regression analysis was performed. Results. It was revealed that the occlusal thickness significantly affected the fracture load (p < 0.01), but the axial thickness did not (p = 0.2828). Although the reduction of the occlusal thickness decreased the fracture resistance of the monolithic zirconia crowns, the fracture load of the zirconia crowns with the occlusal thickness of 0.5 mm (5558 ± 522 N) was significantly higher than that of lithium disilicate crowns with an occlusal thickness of 1.5 mm (3147 ± 409 N). Conclusion. Within the limitations of the present study, it is suggested that monolithic zirconia crown with chamfer width of 0.5 mm and occlusal thickness of 0.5 mm can be used in the molar region in terms of fracture resistance.

Protein characterisation of salivary and plasma biofilms formed in vitro on non-corroded and corroded dental ceramic materials.

Dental ceramics are generally regarded as low-adhesive materials. Different ceramics may, however, differ in composition and physico-chemical surface properties, which may be changed after corrosion. The aim of this study was to examine the adsorption of proteins onto specimens of different ceramic materials after the incubation in saliva and plasma before and after in vitro corrosion. In addition, the topography of the biofilm was examined by AFM. Surface-bound proteins were desorbed and analysed by polyacrylamide gel electrophoresis (PAGE) and immunoblotting using antibodies to saliva and plasma proteins. Silver-stained gels indicated differences in the adsorption of proteins. Differences in surface roughness at the nanometer level did not, however, seem to be correlated to the protein adsorption. After corrosion, unchanged or increased protein staining was generally seen in the gels and Western blots. The reactions for salivary amylase and proline-rich proteins varied between the different materials. Albumin and fibrinogen were identified in samples from all materials tested. Fibronectin and in specific IgA were more sparsely seen. No saliva but all plasma proteins were identified in the alumina and yttria-stabilised zirconia samples and reduced protein reactions were obtained after corrosion.

Surface corrosion of dental ceramics in vitro

The objective of this study was to evaluate possible structural surface changes in different dental ceramic materials in a provocative corrosive environment in vitro. On the basis of compositional and microstructural differences, seven dental ceramic materials were selected for the test. After sintering and autoglazing, the surface roughness of the specimens was evaluated by confocal laser profilometry. A specially designed specimen holder made it possible to locate the same surface area before and after contact with the corrosive solution. The surface topography was additionally analysed using scanning electron microscopy. All the ceramic materials displayed evidence of surface structural changes on the exposed surfaces, but to varying degrees. Traditional leucite-containing feldspathic porcelains displayed an increase in surface roughness compared with baseline conditions when kept in 4% acetic acid at 80 degrees C for 18 h. Micro-crystalline and non-crystalline ceramic materials, on the other hand, demonstrated a smoother surface or just a minor increase in surface roughness. Whether or not the smoother post-corrosion appearance of certain ceramic materials is indicative of a true increase in corrosion resistance or is merely the result of an uniformly progressive corrosive process will be the object of future studies.

The influence of low-temperature degradation and cyclic loading on the fracture resistance of monolithic zirconia molar crowns

The present study analyzed the kinetics of low-temperature degradation (LTD) in zirconia, and evaluated the influence of LTD and cyclic loading on the fracture resistance of monolithic zirconia molar crowns. Bar-shaped zirconia specimens were divided into nine groups and autoclaved at 134°C for 0-200h to induce LTD. The surface fraction and penetration depth of the monoclinic phase were examined using X-ray diffraction and scanning electron microscopy. Monolithic zirconia molar crowns were prepared for crown fracture testing. The crowns were autoclaved for 0-100h (n=6) and cemented to dies. Six crown-die samples that were not autoclaved and six samples that were autoclaved for 100h were subjected to cyclic loading with a load of 300N for 240,000 cycles. All samples were tested in a load-to-failure test. The monoclinic fraction on the surface increased with autoclaving time and reached a plateau after 50h. The depth of the monoclinic phase increased without reaching a plateau. The fracture load of the crowns significantly decreased from 5683N (SD: 342) to 3975N (SD: 194) after 100h of autoclaving. Cyclic loading did not significantly affect the fracture resistance of the crowns in all cases. Kinetic analysis showed no linear correlation between the surface fraction and depth of the monoclinic phase after 50h of autoclaving. Even though LTD increased the monoclinic phase, resulting in lower strength, the fracture resistance of the monolithic zirconia crowns was still sufficient to withstand the loading conditions in the molar regions.

Microleakage of indirect composite inlays: An in vitro comparison with the direct technique

Microleakage occurring around directly and indirectly made class-II composite restorations was evaluated on extracted human premolars. Before the evaluation was made, the teeth were thermocycled and stained with an organic dye. Direct class-II composite restorations demonstrated extensive microleakage at their dentin cavosurface margins. Indirect class-II composite inlays luted with a dual-curing composite cement displayed much less microleakage than restorations made using the direct technique. The use of glass-ionomer cement rather than composite cement as the luting material resulted in more microleakage. Rather than being a true microleakage, the leakage of glass-ionomer cement might be the result of a diffusion of the water-soluble organic dye in the water-based cement. The results suggest that the indirect composite technique is superior to the direct technique when it comes to reducing microleakage.

Influence of grain size and veneer firing process on the flexural strength of zirconia ceramics

The aim of the present investigation was to study the influence of grain size on the strength of yttria-stabilized zirconia upon exposure to an additional heat treatment, mimicking the veneering process. The green bodies of zirconia discs prepared by cold isostatic pressing were sintered at 1,425, 1,500, or 1,575°C to customize the grain size. The disc-shaped specimens were highly polished and then processed with or without additional heat treatments (five times at 850-930°C). Ten specimens from each treatment group were subjected to a biaxial flexural strength test according to the ISO 6872 standard. The grain size of the specimens was analyzed by the mean linear intercept technique using scanning electron microscopy. It was demonstrated that the mechanical strength of zirconia ceramics was not reduced by the veneer firing processes when polished specimens were used, but the strength was found to decrease with increasing grain size. The raw materials and the sintering process used should be selected appropriately to avoid grain coarsening because it was found that the strength was influenced by large grains.

Effect of low-temperature degradation on the mechanical and microstructural properties of tooth-colored 3Y-TZP ceramics

The aim of the present study was to evaluate the effects of low-temperature degradation (LTD) induced by autoclaving on the mechanical and microstructural properties of tooth-colored 3 mol% yttria-stabilized tetragonal zirconia polycrystals (3Y-TZP). In total, 162 disc-shaped 3Y-TZP specimens were prepared. Two-thirds of the specimens were shaded by either the infiltration or powder mixing methods while the remaining specimens were used without coloring. The specimens were autoclaved at 134 °C for 0, 10, and 100 h to induce LTD (n=18 for each group). Chemical compositions were analyzed with X-ray fluorescence spectroscopy. Biaxial flexural strength was measured using a piston-on-three-ball test. The surface fraction and penetration depth of the monoclinic phase were examined using X-ray diffraction and scanning electron microscopy, respectively. The tooth-colored 3Y-TZP specimens contained Fe2O3 and Er2O3 (infiltration technique), and Fe2O3 (powder mixing method) at concentrations of<0.5 wt%. The tooth-colored 3Y-TZP had higher strength than the non-colored material after 100 h of autoclaving. In terms of surface fraction and penetration depth, the generation of monoclinic phase was significantly lower in the tooth-colored 3Y-TZP than in the non-colored material. The tooth-colored 3Y-TZP possessed equivalent biaxial flexural strength to that of the non-colored material and higher resistance to LTD regardless of the coloring technique (infiltration technique or powder mixing method) when the coloring pigments were contained at concentrations used in the present study.

Effect of cements on fracture resistance of monolithic zirconia crowns

Abstract Objectives The present study investigated the effect of cements on fracture resistance of monolithic zirconia crowns in relation to their compressive strength. Materials and methods Four different cements were tested: zinc phosphate cement (ZPC), glass-ionomer cement (GIC), self-adhesive resin-based cement (SRC) and resin-based cement (RC). RC was used in both dual cure mode (RC-D) and chemical cure mode (RC-C). First, the compressive strength of each cement was tested according to a standard (ISO 9917-1:2004). Second, load-to-failure test was performed to analyze the crown fracture resistance. CAD/CAM-produced monolithic zirconia crowns with a minimal thickness of 0.5 mm were prepared and cemented to dies with each cement. The crown–die samples were loaded until fracture. Results The compressive strength of SRC, RC-D and RC-C was significantly higher than those of ZPC and GIC (p < 0.05). However, there was no significant difference in the fracture load of the crown between the groups. Conclusion The values achieved in the load-to-failure test suggest that monolithic zirconia crowns with a minimal thickness of 0.5 mm may have good resistance against fracture regardless of types of cements.