Peter Grutter

Effect of mechanical properties of hydrogel nanoparticles on macrophage cell uptake

Uptake and intracellular trafficking of hydrogel nanoparticles (NPs) of N,N-diethyl acrylamide and 2-hydroxyethyl methacrylate crosslinked with N,N′-methylene-bis-acrylamide were studied with a RAW 264.7 murine macrophage cell line. Results show that the uptake rate, the mechanism of internalization and the concentration of internalized NPs are correlated to the NP Young modulus. Soft NPs are found to be internalized preferentially via macropinocytosis while the uptake of stiff NPs is mediated by a clathrin-dependent mechanism. NPs with an intermediate Young modulus exhibit multiple uptake mechanisms. The accumulation rate of the NPs into lysosomal compartments of the cell is also dependent on the NP elasticity. Our results suggest that control over the mechanical properties of hydrogel NPs can be used to tailor the cellular uptake mechanism and kinetics of drug delivery.

Cantilever-based sensing: the origin of surface stress and optimization strategies

Many interactions drive the adsorption of molecules on surfaces, all of which can result in a measurable change in surface stress. This article compares the contributions of various possible interactions to the overall induced surface stress for cantilever-based sensing applications. The surface stress resulting from adsorption-induced changes in the electronic density of the underlying surface is up to 2-4 orders of magnitude larger than that resulting from intermolecular electrostatic or Lennard-Jones interactions. We reveal that the surface stress associated with the formation of high quality alkanethiol self-assembled monolayers on gold surfaces is independent of the molecular chain length, supporting our theoretical findings. This provides a foundation for the development of new strategies for increasing the sensitivity of cantilever-based sensors for various applications.

Quantitative surface stress measurements using a microcantilever

A method for calculating the surface stress associated with the deflection of a micromechanical cantilever is presented. This method overcomes some of the limitations associated with Stoney’s formula by circumventing the need to know the cantilever’s Young’s modulus, which can have a high level of uncertainty, especially for silicon nitride cantilevers. The surface stress is calculated using readily measurable cantilever properties, such as its geometry, spring constant, and deflection. The method is applicable to both rectangular and triangular cantilevers. A calibration of the deflection measurement is also presented. The surface stress measurement is accurate to within 4%–7%.

Rapid Assembly of Functional Presynaptic Boutons Triggered by Adhesive Contacts

CNS synapse assembly typically follows after stable contacts between “appropriate” axonal and dendritic membranes are made. We show that presynaptic boutons selectively form de novo following neuronal fiber adhesion to beads coated with poly-d-lysine (PDL), an artificial cationic polypeptide. As demonstrated by atomic force and live confocal microscopy, functional presynaptic boutons self-assemble as rapidly as 1 h after bead contact, and are found to contain a variety of proteins characteristic of presynaptic endings. Interestingly, presynaptic compartment assembly does not depend on the presence of a biological postsynaptic membrane surface. Rather, heparan sulfate proteoglycans, including syndecan-2, as well as others possibly adsorbed onto the bead matrix or expressed on the axon surface, are required for assembly to proceed by a mechanism dependent on the dynamic reorganization of F-actin. Our results indicate that certain (but not all) nonspecific cationic molecules like PDL, with presumably electrostatically mediated adhesive properties, can effectively bypass cognate and natural postsynaptic ligands to trigger presynaptic assembly in the absence of specific target recognition. In contrast, we find that postsynaptic compartment assembly depends on the prior presence of a mature presynaptic ending.

Magnetic dissipation force microscopy

A method of measuring magnetic dissipation on a sub-100 nm scale is presented. This technique relies on measuring changes in the damping of the oscillating tip in a magnetic force microscope (MFM). Damping contrast is strongly correlated with micromagnetic structure and in the case of NiFe, is in quantitative agreement with magnetoelastic losses in the sample. On recording tracks, large damping signals are observed. This has direct consequences on the interpretation of traditional MFM images acquired with detectors that convolute frequency and damping information.

I-V characteristics and differential conductance fluctuations of Au nanowires

Electronic transport properties of the Au nanostructure are investigated using both experimental and theoretical analysis. Experimentally, stable Au nanowires were created using a mechanically controllable break junction in air, and simultaneous current-voltage (I-V) and differential conductance δI/δV data were measured. The atomic device scale structures are mechanically very stable up to bias voltage V b ∼0.6 V and have a lifetime of a few minutes. Facilitated by a shape function data analysis technique which finger prints electronic properties of the atomic device, our data show clearly differential conductance fluctuations with an amplitude > 1 % at room temperature and a nonlinear I-V characteristics. To understand the transport features of these atomic scale conductors, we carried out ah initio calculations on various Au atomic wires. The theoretical results demonstrate that transport properties of these systems crucially depend on the electronic properties of the scattering region, the leads, and most importantly the interaction of the scattering region with the leads. For ideal, clean Au contacts, the theoretical results indicate a linear I-V behavior for bias voltage V b <0.5 V. When sulfur impurities exist at the contact junction, nonlinear I-V curves emerge due to a tunneling barrier established in the presence of the S atom. The most striking observation is that even a single S atom can cause a qualitative change of the I-V curve from linear to nonlinear. A quantitatively favorable comparison between experimental data and theoretical results is obtained. We also report other results concerning quantum transport through Au atomic contacts.

Netrin-1 promotes excitatory synaptogenesis between cortical neurons by initiating synapse assembly.

Netrin-1 is a secreted protein that directs long-range axon guidance during early stages of neural circuit formation and continues to be expressed in the mammalian forebrain during the postnatal period of peak synapse formation. Here we demonstrate a synaptogenic function of netrin-1 in rat and mouse cortical neurons and investigate the underlying mechanism. We report that netrin-1 and its receptor DCC are widely expressed by neurons in the developing mammalian cortex during synapse formation and are enriched at synapses in vivo. We detect DCC protein distributed along the axons and dendrites of cultured cortical neurons and provide evidence that newly translated netrin-1 is selectively transported to dendrites. Using gain and loss of function manipulations, we demonstrate that netrin-1 increases the number and strength of excitatory synapses made between developing cortical neurons. We show that netrin-1 increases the complexity of axon and dendrite arbors, thereby increasing the probability of contact. At sites of contact, netrin-1 promotes adhesion, while locally enriching and reorganizing the underlying actin cytoskeleton through Src family kinase signaling and m-Tor-dependent protein translation to locally cluster presynaptic and postsynaptic proteins. Finally, we demonstrate using whole-cell patch-clamp electrophysiology that netrin-1 increases the frequency and amplitude of mEPSCs recorded from cortical pyramidal neurons. These findings identify netrin-1 as a synapse-enriched protein that promotes synaptogenesis between mammalian cortical neurons.

Comparison of photothermal and piezoacoustic excitation methods for frequency and phase modulation atomic force microscopy in liquid environments

In attempting to perform frequency modulation atomic force microscopy (FM-AFM) in liquids, a non-flat phase transfer function in the self-excitation system prevents proper tracking of the cantilever natural frequency. This results in frequency-and-phase modulation atomic force microscopy (FPM-AFM) which lies in between phase modulation atomic force microscopy (PM-AFM) and FM-AFM. We derive the theory necessary to recover the conservative force and damping in such a situation, where standard FM-AFM theory no longer applies. Although our recovery procedure applies to all cantilever excitation methods in principle, its practical implementation may be difficult, or even impossible, if the cantilever is driven piezoacoustically. Specifically, we contrast the piezoacoustic excitation method to the photothermal method in the context of force spectroscopy of hydration structures at the mica-water interface. The results clearly demonstrate that photothermal excitation is superior to piezoacoustic excitation, as it...

Probing the “Dark” Fraction of Core–Shell Quantum Dots by Ensemble and Single Particle pH-Dependent Spectroscopy

The optical properties of core-shell CdSe-ZnS quantum dots (QDs) are characterized by complex photophysics leading to difficulties in interpreting quantitative measurements based on QD emission. By comparing the pH dependence of fluorescence of single QDs to that of an ensemble, we have been able to propose a molecular scale model of how QD surface chemical and physical processes are affected by protons and oxygen. We show that the connection between the ensemble fluorescence intensity and the single QD fluorescence properties such as dark fraction, blinking, particle brightness, and a multiexponential fluorescence lifetime decay is not trivial. The ensemble fluorescence intensity is more weakly dependent on pH than the single particle fluorescence which, together with fluorescence lifetime analysis, provided evidence that the dark fraction of QDs emits photons with low quantum efficiency and long lifetime. We uncovered two surface-dependent mechanisms that affected the fluorescence emission: an immediate physical effect of charges surrounding the QD and an irreversible chemical effect from reaction of the H(+) and O(2) with the QD shell surface. These results will have important implications for those using QD-based fluorescence lifetime imaging as well as for proper implementation of these probes for quantitative cellular imaging applications.

Strong electromechanical coupling of an atomic force microscope cantilever to a quantum dot.

We present theoretical and experimental results on the mechanical damping of an atomic force microscope cantilever strongly coupled to a self-assembled InAs quantum dot. When the cantilever oscillation amplitude is large, its motion dominates the charge dynamics of the dot which in turn leads to nonlinear, amplitude-dependent damping of the cantilever. We observe highly asymmetric lineshapes of Coulomb blockade peaks in the damping that reflect the degeneracy of energy levels on the dot, in excellent agreement with our strong coupling theory. Furthermore, we predict that excited state spectroscopy is possible by studying the damping versus oscillation amplitude, in analogy to varying the amplitude of an ac gate voltage.