Peter Kappen

Fate of ZnO Nanoparticles in Soils and Cowpea (Vigna unguiculata)

The increasing use of zinc oxide nanoparticles (ZnO-NPs) in various commercial products is prompting detailed investigation regarding the fate of these materials in the environment. There is, however, a lack of information comparing the transformation of ZnO-NPs with soluble Zn(2+) in both soils and plants. Synchrotron-based techniques were used to examine the uptake and transformation of Zn in various tissues of cowpea ( Vigna unguiculata (L.) Walp.) exposed to ZnO-NPs or ZnCl2 following growth in either solution or soil culture. In solution culture, soluble Zn (ZnCl2) was more toxic than the ZnO-NPs, although there was substantial accumulation of ZnO-NPs on the root surface. When grown in soil, however, there was no significant difference in plant growth and accumulation or speciation of Zn between soluble Zn and ZnO-NP treatments, indicating that the added ZnO-NPs underwent rapid dissolution following their entry into the soil. This was confirmed by an incubation experiment with two soils, in which ZnO-NPs could not be detected after incubation for 1 h. The speciation of Zn was similar in shoot tissues for both soluble Zn and ZnO-NPs treatments and no upward translocation of ZnO-NPs from roots to shoots was observed in either solution or soil culture. Under the current experimental conditions, the similarity in uptake and toxicity of Zn from ZnO-NPs and soluble Zn in soils indicates that the ZnO-NPs used in this study did not constitute nanospecific risks.

The New Maia Detector System: Methods For High Definition Trace Element Imaging Of Natural Material

Motivated by the need for megapixel high definition trace element imaging to capture intricate detail in natural material, together with faster acquisition and improved counting statistics in elemental imaging, a large energy‐dispersive detector array called Maia has been developed by CSIRO and BNL for SXRF imaging on the XFM beamline at the Australian Synchrotron. A 96 detector prototype demonstrated the capacity of the system for real‐time deconvolution of complex spectral data using an embedded implementation of the Dynamic Analysis method and acquiring highly detailed images up to 77 M pixels spanning large areas of complex mineral sample sections.

Silver sulfide nanoparticles (Ag2S-NPs) are taken up by plants and are phytotoxic

Abstract Silver nanoparticles (NPs) are used in more consumer products than any other nanomaterial and their release into the environment is unavoidable. Of primary concern is the wastewater stream in which most silver NPs are transformed to silver sulfide NPs (Ag2S-NPs) before being applied to agricultural soils within biosolids. While Ag2S-NPs are assumed to be biologically inert, nothing is known of their effects on terrestrial plants. The phytotoxicity of Ag and its accumulation was examined in short-term (24 h) and longer-term (2-week) solution culture experiments with cowpea (Vigna unguiculata L. Walp.) and wheat (Triticum aestivum L.) exposed to Ag2S-NPs (0–20 mg Ag L−1), metallic Ag-NPs (0–1.6 mg Ag L−1), or ionic Ag (AgNO3; 0–0.086 mg Ag L−1). Although not inducing any effects during 24-h exposure, Ag2S-NPs reduced growth by up to 52% over a 2-week period. This toxicity did not result from their dissolution and release of toxic Ag+ in the rooting medium, with soluble Ag concentrations remaining below 0.001 mg Ag L−1. Rather, Ag accumulated as Ag2S in the root and shoot tissues when plants were exposed to Ag2S-NPs, consistent with their direct uptake. Importantly, this differed from the form of Ag present in tissues of plants exposed to AgNO3. For the first time, our findings have shown that Ag2S-NPs exert toxic effects through their direct accumulation in terrestrial plant tissues. These findings need to be considered to ensure high yield of food crops, and to avoid increasing Ag in the food chain.

Iridium clusters for catalytic partial oxidation of methane - an in situ transmission and fluorescence XAFS study

In situ transmission and fluorescence EXAFS combined with on-line gas analysis have provided new insight in the structural changes and the catalytic properties of Ir clusters during the catalytic partial oxidation (CPO) of methane. A novel in situ fluorescence XAFS setup with a multi element silicon drift detector allows time-resolved in situ studies on catalysts with small noble metal concentrations. Significant structural differences were found between a 0.5 wt% Ir/Al2O3 and a 2.5 wt% Ir/Al2O3 catalyst upon treatment in He and H2. After He treatment metallic clusters form on high loading Ir catalysts but not when the loading is small. Upon H2 treatment metallic Ir clusters are detected in both catalysts, but the particle size is smaller when a low loading is used. The smaller clusters appear to be more sensitive to oxidation. The CPO reaction is found to ignite at 320 °C, nearly independent of the residence time and the Ir cluster size. The structure of the clusters changes significantly at the ignition point. Below the ignition point they are partly (2.5 wt% Ir) or nearly fully (0.5 wt% Ir) oxidized and above the ignition temperature they are abruptly reduced. The catalytic and structural changes are reversible.

Acidification and buffering mechanisms in acid sulfate soil wetlands of the Murray-Darling Basin, Australia.

The acid generation mechanisms and neutralizing capacities of sulfidic sediments from two inland wetlands have been studied in order to understand the response of these types of systems to drying events. The two systems show vastly different responses to oxidation, with one (Bottle Bend (BB) lagoon) having virtually no acid neutralizing capacity (ANC) and the other (Psyche Bend (PB) lagoon) an ANC that is an order of magnitude greater than the acid generation potential. While BB strongly acidifies during oxidation the free acid generation is less than that expected from the measured proton production and consumption processes, with additional proton consumption attributed to the formation of an acid-anion (chloride) FeIII (oxyhydr)oxide product, similar to akaganéite (Fe(OH)2.7Cl0.3). While such products can partially attenuate the acidification of these systems, resilience to acidification is primarily imparted by sediment ANC.

Silicon drift detectors as a tool for time-resolved fluorescence XAFS on low-concentrated samples in catalysis

A silicon drift detector (SDD) was used for ex situ and time-resolved in situ fluorescence X-ray absorption fine structure (XAFS) on low-concentrated catalyst samples. For a single-element and a seven-element SDD the energy resolution and the peak-to-background ratio were verified at high count rates, sufficient for fluorescence XAFS. An experimental set-up including the seven-element SDD without any cooling and an in situ cell with gas supply and on-line gas analysis was developed. With this set-up the reduction and oxidation of a zeolite supported catalyst containing 0.3 wt% platinum was followed by fluorescence near-edge scans with a time resolution of 10 min each. From ex situ experiments on low-concentrated platinum- and gold-based catalysts fluorescence XAFS scans could be obtained with sufficient statistical quality for a quantitative analysis. Structural information on the gold and platinum particles could be extracted by both the Fourier transforms and the near-edge region of the XAFS spectra. Moreover, it was found that with the seven-element SDD concentrations of the element of interest as low as 100 ppm can be examined by fluorescence XAFS.

Chemical state of chromium in sewage sludge ash based phosphorus-fertilisers

Sewage sludge ash (SSA) based P-fertilisers were produced by thermochemical treatment of SSA with Cl-donors at approximately 1000°C. During this thermochemical process heavy metals are separated as heavy metal chlorides via the gas phase. Chromium cannot be separated under normal conditions. The risk of the development of toxic Cr(VI) during the thermochemical process was investigated. X-ray Absorption Spectroscopy measurements showed that SSA and thermochemically treated SSA with CaCl2, MgCl2 and NaCl contain Cr(III) compounds only. In contrast, treating SSA with elevated quantities of Na2CO3, to enhance the plant-availability of the phosphate phases of the fertiliser, developed approximately 10-15% Cr(VI). Furthermore, Raman microspectroscopy showed that using Mg-carbonate reduces the risk of a Cr(VI) development during thermochemical treatment. Additionally, leaching tests showed that only a Cr-water solubility>10% is an indicator for Cr(VI) in SSA based P-fertilisers.

Addition of carboxylic acids modifies phosphate sorption on soil and boehmite surfaces: A solution chemistry and XANES spectroscopy study

Soil acidification is a globally significant agricultural issue, as the plant availability of phosphorus (P) is decreased through increased P sorption onto aluminium (Al) hydroxides and other solid phase binding sites. X-ray absorption near edge structure (XANES) spectroscopy generated new information on the speciation of Al and P in the presence of carboxylic acids on soil and boehmite (gamma-AlOOH) surfaces. XANES spectra were acquired in the soft X-ray regime at the P and Al L(2,3)-edges, and the Al K-edge, respectively. Adding oxalic acid to soil enhanced Al dissolution and exposed previously occluded soil P, while hydroxybenzoic and coumaric acids did not compete with P for surface binding sites. Boehmite strongly adsorbed carboxylic acids in the absence of applied phosphorus. However, when P was applied with carboxylic acids, the carboxylics were unable to compete with P for binding, especially hydroxybenzoic and coumaric acids. Using XANES in both total electron yield and fluorescence yield modes provided valuable information on both surface and near-surface processes of P and Al due to different information depths. The Al K-edge XANES provided baseline information on the solid-phase matrix. XANES in total electron yield mode and at the P L-edge shows promise for speciation of elements on soil surfaces due to enhanced sensitivity for speciation of surface-adsorbed species compared to the commonly used P K-edge XANES.

Time-resolved XANES speciation studies of chromium on soils during simulated contamination

Time-resolved synchrotron X-ray absorption near edge structure (XANES) spectroscopy was used to study changes of chromium speciation in soils upon soil-water interaction. The time resolution was 30-45 min. In a flow-column apparatus operated near the synchrotron beamline, two different types of soil were treated with potassium-dichromate solution, and soil samples were taken and directly analysed by XANES. The results provide insight into different equilibrium times of a few hours, depending on the type of soil. The XANES speciation analyses, based on a model comprising insoluble Cr(III) and Cr(VI) compounds, show how the fate of Cr species on soils can be followed close to real-time. Since the method allowed the soils to be investigated close to real-time, sampling in the field and preservation before analysis were made redundant. This study benefits the development of corresponding in situ remediation techniques.

Fluorescence EXAFS for the in situ study on the state of promotors in catalysis

The fluorescence EXAFS (FLEXAFS) technique has been combined with an in situ cell and on-line gas analysis. For this purpose a seven-element silicon drift detector has been used, which has high count rate capabilities and can be operated at room temperature. The potential of this technique is shown by the study of the state of copper promoter atoms in Fe-Cr based high temperature shift (HTS) catalysts. The FLEXAFS measurements revealed that Cu (0.17-1.5 wt%) is present in the metallic state under working conditions of the catalysts but easily re-oxidizes upon air exposure. The reduction behaviour of copper depends strongly on the copper concentration and the pre-treatment, i.e. if the catalysts have been calcined or used in the HTS reaction. For used catalysts, a Cu(I) phase was detected as intermediate during reduction. Its stability was especially high at low copper concentration.