Peter Kingshott

Surfaces that resist bioadhesion

Abstract The search for surfaces that resist bioadhesion has continued with the pursuit of a number of avenues. A large part of the studies has investigated PEG coatings. Nevertheless, there is still controversy about what exactly the properties and modes of action of an ‘ideal’ PEG coating should be. While some studies have reported no irreversible protein adsorption, other, very similar coatings appear less able to resist bioadhesion. Of great interest are results showing that PEG surfaces with very short chains are capable of rejecting proteins. As it is very difficult to obtain direct information about the microstructure of the coatings, studies typically employ plausible models to interpret observations. New analytical techniques and the direct measurement of interfacial forces between proteins and surfaces open up the possibility of improved, guided design and feedback in the optimization of surfaces intended to resist bioadhesion.

Electrospun Nanofibers as Dressings for Chronic Wound Care: Advances, Challenges, and Future Prospects

Chronic non-healing wounds show delayed and incomplete healing processes and in turn expose patients to a high risk of infection. Treatment currently focuses on dressings that prevent microbial infiltration and keep a balanced moisture and gas exchange environment. Antibacterial delivery from dressings has existed for some time, with responsive systems now aiming to trigger release only if infection occurs. Simultaneously, approaches that stimulate cell proliferation in the wound and encourage healing have been developed. Interestingly, few dressings appear capable of simultaneously impairing or treating infection and encouraging cell proliferation/wound healing. Electrospinning is a simple, cost-effective, and reproducible process that can utilize both synthetic and natural polymers to address these specific wound challenges. Electrospun meshes provide high-surface area, micro-porosity, and the ability to load drugs or other biomolecules into the fibers. Electrospun materials have been used as scaffolds for tissue engineering for a number of years, but there is surprisingly little literature on the interactions of fibers with bacteria and co-cultures of cells and bacteria. This Review examines the literature and data available on electrospun wound dressings and the research that is required to develop smart multifunctional wound dressings capable of treating infection and healing chronic wounds.

Effect of polysaccharide structure on protein adsorption

Abstract Using X-ray photoelectron spectroscopy for quantification, the adsorption has been studied of chicken egg lysozyme, human serum albumin (HSA), bovine colostrum lactoferrin, and γ-globulin (IgG) from single solutions onto surface-immobilised polysaccharide coatings, which were produced by the covalent attachment of a series of carboxymethyldextrans (CMDs) onto aminated fluoropolymer surfaces. CMDs with differing degrees of carboxymethyl substitution were synthesized by the reaction of dextran with bromoacetic acid under different reactant ratios. Substantial amounts of protein adsorption onto these coatings were observed with the majority of the coating/protein combinations. On the most extensively substituted CMD (1 carboxyl group per 2 dextran units), lysozyme and lactoferrin adsorbed to approximately monolayer amounts whereas there was minimal adsorption of HSA, indicating the importance of electrostatic interfacial interactions. CMD 1:14 was similar whereas the least substituted, least dense coating, from CMD 1:30, adsorbed less lysozyme and lactoferrin but more HSA. Adsorption of the large multidomain protein IgG varied little with the coating. Grazing angle XPS data indicated that for the CMD 1:30 coating there occurred significant in-diffusion of the lower molecular weight proteins. The data suggest that elimination of adsorption of a broad spectrum of proteins is not straightforward with negatively charged polysaccharide coatings; elimination of protein accumulation onto/into such coatings may not be achievable solely with a balance of electrostatic and steric–entropic interfacial forces.

Fibronectin adsorption, cell adhesion, and proliferation on nanostructured tantalum surfaces

The interaction between dental pulp derived mesenchymal stem cells (DP-MSCs) and three different tantalum nanotopographies with and without a fibronectin coating is examined: sputter-coated tantalum surfaces with low surface roughness <0.2 nm, hut-nanostructured surfaces with a height of 2.9 +/- 0.6 nm and a width of 35 +/- 8 nm, and dome structures with a height of 13 +/- 2 nm and a width of 52 +/- 14 nm. Using ellipsometry, the adsorption and the availability of fibronectin cell-binding domains on the tantalum surfaces were examined, as well as cellular attachment, proliferation, and vinculin focal adhesion spot assembly on the respective surfaces. The results showed the highest fibronectin mass uptake on the hut structures, with a slightly higher availability of cell-binding domains and the most pronounced formation of vinculin focal adhesion spots as compared to the other surfaces. The proliferation of DP-MSCs was found to be significantly higher on dome and hut surfaces coated with fibronectin compared to the uncoated flat tantalum surfaces. Consequently, the results presented in this study indicate that fibronectin-coated nanotopographies with a vertical dimension of less than 5 nm influence cell adhesion. This rather interesting behavior is argued to originate from the more available fibronectin cell-binding domains observed on the hut structures.

Functional Electrospun Polystyrene Nanofibers Incorporating α-, β-, and γ-Cyclodextrins: Comparison of Molecular Filter Performance

Electrospinning has been used to successfully create polystyrene (PS) nanofibers containing either of three different types of cyclodextrin (CD); α-CD, β-CD, and γ-CD. These three CDs are chosen because they have different sized cavities that potentially allow for selective inclusion complex (IC) formation with molecules of different size or differences in affinity of IC formation with one type of molecule. The CD containing electrospun PS nanofibers (PS/CD) were initially characterized by scanning electron microscopy (SEM) to determine the uniformity of the fibers and their fiber diameter distributions. X-ray photoelectron spectroscopy (XPS) was used to quantitatively determine the concentration of each CD on the different fiber surfaces. Static time-of-flight secondary ion mass spectrometry (static-ToF-SIMS) showed the presence of each type of CD on the PS nanofibers by the detection of both the CD sodium adduct molecular ions (M + Na+) and lower molecular weight oxygen containing fragment ions. The comparative efficiency of the PS/CD nanofibers/nanoweb for removing phenolphthalein, a model organic compound, from solution was determined by UV-vis spectrometry, and the kinetics of phenolphthalein capture was shown to follow the trend PS/α-CD > PS/β-CD > PS/γ-CD. Direct pyrolysis mass spectrometry (DP-MS) was also performed to ascertain the relative binding strengths of the phenolphthalein for the CD cavities, and the results showed the trend in the interaction strength was β-CD > γ-CD > α-CD. Our results demonstrate that nanofibers produced by electrospinning that incorporate cyclodextrins with different sized cavities can indeed filter organic molecules and can potentially be used for filtration, purification, and/or separation processes.

The influence of nanostructured materials on biointerfacial interactions

Control over biointerfacial interactions in vitro and in vivo is the key to many biomedical applications: from cell culture and diagnostic tools to drug delivery, biomaterials and regenerative medicine. The increasing use of nanostructured materials is placing a greater demand on improving our understanding of how these new materials influence biointerfacial interactions, including protein adsorption and subsequent cellular responses. A range of nanoscale material properties influence these interactions, and material toxicity. The ability to manipulate both material nanochemistry and nanotopography remains challenging in its own right, however, a more in-depth knowledge of the subsequent biological responses to these new materials must occur simultaneously if they are ever to be affective in the clinic. We highlight some of the key technologies used for fabrication of nanostructured materials, examine how nanostructured materials influence the behavior of proteins and cells at surfaces and provide details of important analytical techniques used in this context.

Immobilisation of living bacteria for AFM imaging under physiological conditions

Atomic force microscopy (AFM) holds great potential for studying the nanoscale surface structures of living cells, and to measure their interactions with abiotic surfaces, other cells, or specific biomolecules. However, the application of AFM in microbiology is challenging due to the difficulty of immobilising bacterial cells to a flat surface without changing the cell surface properties or cell viability. We have performed an extensive and thorough study of how to functionalise surfaces in order to immobilise living bacteria for AFM studies in liquid environments. Our aim was to develop a scheme which allows bacterial cells to be immobilised to a flat surface with sufficient strength to avoid detachment during the AFM scanning, and without affecting cell surface chemistry, structure, and viability. We compare and evaluate published methods, and present a new, reproducible, and generally applicable scheme for immobilising bacteria cells for an AFM imaging. Bacterial cells were immobilised to modified glass surfaces by physical confinement of cells in microwells, physisorption to positively charged surfaces, covalent binding to amine- or carboxyl-terminated surfaces, and adsorption to surfaces coated with highly adhesive polyphenolic proteins originating from the mussel Mytilus edulis. Living cells could be immobilised with all of these approaches, but many cells detached when immobilised by electrostatic interactions and imaged in buffers like PBS or MOPS. Cells were more firmly attached when immobilised by covalent binding, although some cells still detached during AFM imaging. The most successful method revealed was immobilisation by polyphenolic proteins, which facilitated firm immobilisation of the cells. Furthermore, the cell viability was not affected by this immobilisation scheme, and adhesive proteins thus provide a fast, reproducible, and generally applicable scheme for immobilising living bacteria for an AFM imaging.

Stainless steel modified with poly(ethylene glycol) can prevent protein adsorption but not bacterial adhesion

Abstract The surface of AISI 316 grade stainless steel (SS) was modified with a layer of poly(ethylene glycol) (PEG) (molecular weight 5000) with the aim of preventing protein adsorption and bacterial adhesion. Model SS substrates were first modified to introduce a very high density of reactive amine groups by the adsorption of branched poly(ethylenimine) (PEI) from water. Methoxy-terminated aldehyde-poly(ethylene glycol) (M-PEG-CHO) was then grafted onto the PEI layers using reductive amination at the lower critical solution temperature (LCST) of the PEG in order to optimize the graft density of the linear PEG chains. The chemical composition and uniformity of the surfaces were determined using X-ray photoelectron spectroscopy (XPS) and time-of-flight static secondary ion mass spectrometry (ToF-SSIMS) in the imaging mode. The effects of PEI concentration and different substrate pre-cleaning methods on the structure and stability of the final PEG layer was examined. Piranha solution proved to be the most effective method for removing adventitious hydrocarbon contamination, compared to cleaning with ultrasonication in organic solvents, and was the SS substrate that produced the most stable and thickest PEI layer. The surface density of PEI was shown to increase with increasing PEI concentration (up to 30 mg/ml), as determined from XPS measurements, and subsequently produced the PEG layer with the highest density of attached chains. In model experiments using β-lactoglobulin no protein adsorption was detected on the optimized PEG surface as determined by XPS and ToF-SSIMS analysis. However, neither the adhesion of a Gram-negative (Pseudomonas sp.) nor a Gram-positive (Listeria monocytogenes) bacterium was affected by the coating as equal numbers adhered to all surfaces tested. Our results show that preventing protein adsorption is not a prerequisite stopping bacterial adhesion, and that other mechanisms most likely play a role.

Clinical observations of biofouling on PEO coated silicone hydrogel contact lenses

Silicone hydrogel contact lenses, which have been a major advance in the field of vision correction, require surface modification or coatings for comfort and biocompatibility. While current coatings show adequate clinical performance, advanced coatings may improve the biocompatibility of contact lenses further by reducing biofouling and related adverse clinical events. Here, we have produced coatings on Lotrafilcon A contact lenses by deposition of a thin film of allylamine plasma polymer (ALAPP) as a reactive interlayer for the high density grafting of poly(ethylene oxide) dialdehyde (PEO(ALD)(2)), which had previously shown complete resistance to protein adsorption in vitro. The performance of these contact lenses was evaluated in a controlled clinical study over 6h using Focus Night and Day (also known as Air Optix Night & Day) contact lenses as control lenses. Surface modified lenses were characterised by X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM) before and after wear. Clinical data showed a high level of biocompatibility of the PEO coated lenses equivalent to control lenses. Surface analysis of worn contact lenses demonstrated that the high density PEO coating is effective in reducing biofouling in vivo compared to control lenses, however small amounts of protein deposits were still detected on all worn contact lenses. This study highlights that elimination of biofouling in vivo can be much more demanding than in vitro and discusses issues that are important for the analysis of worn contact lenses as well as the design of improved contact lenses.

Formation of palladium(0) nanoparticles at microbial surfaces

The increasing demand and limited natural resources for industrially important platinum‐group metal (PGM) catalysts render the recovery from secondary sources such as industrial waste economically interesting. In the process of palladium (Pd) recovery, microorganisms have revealed a strong potential. Hitherto, bacteria with the property of dissimilatory metal reduction have been in focus, although the biochemical reactions linking enzymatic Pd(II) reduction and Pd(0) deposition have not yet been identified. In this study we investigated Pd(II) reduction with formate as the electron donor in the presence of Gram‐negative bacteria with no documented capacity for reducing metals for energy production: Cupriavidus necator, Pseudomonas putida, and Paracoccus denitrificans. Only large and close‐packed Pd(0) aggregates were formed in cell‐free buffer solutions. Pd(II) reduction in the presence of bacteria resulted in smaller, well‐suspended Pd(0) particles that were associated with the cells (called “bioPd(0)” in the following). Nanosize Pd(0) particles (3–30 nm) were only observed in the presence of bacteria, and particles in this size range were located in the periplasmic space. Pd(0) nanoparticles were still deposited on autoclaved cells of C. necator that had no hydrogenase activity, suggesting a hydrogenase‐independent formation mechanism. The catalytic properties of Pd(0) and bioPd(0) were determined by the amount of hydrogen released in a reaction with hypophosphite. Generally, bioPd(0) demonstrated a lower level of activity than the Pd(0) control, possibly due to the inaccessibility of the Pd(0) fraction embedded in the cell envelope. Our results demonstrate the suitability of bacterial cells for the recovery of Pd(0), and formation and immobilization of Pd(0) nanoparticles inside the cell envelope. However, procedures to make periplasmic Pd(0) catalytically accessible need to be developed for future nanobiotechnological applications. Biotechnol. Bioeng. 2010;107: 206–215.