Peter Philippsen

Additional modules for versatile and economical PCR-based gene deletion and modification in Saccharomyces cerevisiae

An important recent advance in the functional analysis of Saccharomyces cerevisiae genes is the development of the one‐step PCR‐mediated technique for deletion and modification of chromosomal genes. This method allows very rapid gene manipulations without requiring plasmid clones of the gene of interest. We describe here a new set of plasmids that serve as templates for the PCR synthesis of fragments that allow a variety of gene modifications. Using as selectable marker the S. cerevisiae TRP1 gene or modules containing the heterologous Schizosaccharomyces pombe his5+ or Escherichia coli kanr gene, these plasmids allow gene deletion, gene overexpression (using the regulatable GAL1 promoter), C‐ or N‐terminal protein tagging [with GFP(S65T), GST, or the 3HA or 13Myc epitope], and partial N‐ or C‐terminal deletions (with or without concomitant protein tagging). Because of the modular nature of the plasmids, they allow efficient and economical use of a small number of PCR primers for a wide variety of gene manipulations. Thus, these plasmids should further facilitate the rapid analysis of gene function in S. cerevisiae.

Life with 6000 Genes

The genome of the yeast Saccharomyces cerevisiae has been completely sequenced through a worldwide collaboration. The sequence of 12,068 kilobases defines 5885 potential protein-encoding genes, approximately 140 genes specifying ribosomal RNA, 40 genes for small nuclear RNA molecules, and 275 transfer RNA genes. In addition, the complete sequence provides information about the higher order organization of yeasts 16 chromosomes and allows some insight into their evolutionary history. The genome shows a considerable amount of apparent genetic redundancy, and one of the major problems to be tackled during the next stage of the yeast genome project is to elucidate the biological functions of all of these genes.

Functional profiling of the Saccharomyces cerevisiae genome

Determining the effect of gene deletion is a fundamental approach to understanding gene function. Conventional genetic screens exhibit biases, and genes contributing to a phenotype are often missed. We systematically constructed a nearly complete collection of gene-deletion mutants (96% of annotated open reading frames, or ORFs) of the yeast Saccharomyces cerevisiae. DNA sequences dubbed ‘molecular bar codes’ uniquely identify each strain, enabling their growth to be analysed in parallel and the fitness contribution of each gene to be quantitatively assessed by hybridization to high-density oligonucleotide arrays. We show that previously known and new genes are necessary for optimal growth under six well-studied conditions: high salt, sorbitol, galactose, pH 8, minimal medium and nystatin treatment. Less than 7% of genes that exhibit a significant increase in messenger RNA expression are also required for optimal growth in four of the tested conditions. Our results validate the yeast gene-deletion collection as a valuable resource for functional genomics.

Heterologous modules for efficient and versatile PCR-based gene targeting in Schizosaccharomyces pombe

We describe a straightforward PCR‐based approach to the deletion, tagging, and overexpression of genes in their normal chromosomal locations in the fission yeast Schizosaccharomyces pombe. Using this approach and the S. pombe ura4+ gene as a marker, nine genes were deleted with efficiencies of homologous integration ranging from 6 to 63%. We also constructed a series of plasmids containing the kanMX6 module, which allows selection of G418‐resistant cells and thus provides a new heterologous marker for use in S. pombe. The modular nature of these constructs allows a small number of PCR primers to be used for a wide variety of gene manipulations, including deletion, overexpression (using the regulatable nmt1 promoter), C‐ or N‐terminal protein tagging (with HA, Myc, GST, or GFP), and partial C‐ or N‐terminal deletions with or without tagging. Nine genes were manipulated using these kanMX6 constructs as templates for PCR. The PCR primers included 60 to 80 bp of flanking sequences homologous to target sequences in the genome. Transformants were screened for homologous integration by PCR. In most cases, the efficiency of homologous integration was ≥50%, and the lowest efficiency encountered was 17%. The methodology and constructs described here should greatly facilitate analysis of gene function in S. pombe.

Heterologous HIS3 Marker and GFP Reporter Modules for PCR-Targeting in Saccharomyces cerevisiae

We have fused the open reading frames of his3‐complementing genes from Saccharomyces kluyveri and Schizosaccharomyces pombe to the strong TEF gene promotor of the filamentous fungus Ashbya gossypii. Both chimeric modules and the cognate S. kluyveri HIS3 gene were tested in transformations of his3 S. cerevisiae strains using PCR fragments flanked by 40 bp target guide sequences. The 1·4 kb chimeric Sz. pombe module (HIS3MX6) performed best. With less than 5% incorrectly targeted transformants, it functions as reliably as the widely used geniticin resistance marker kanMX. The rare false‐positive His+ transformants seem to be due to non‐homologous recombination rather than to gene conversion of the mutated endogenous his3 allele. We also cloned the green fluorescent protein gene from Aequorea victoria into our pFA‐plasmids with HIS3MX6 and kanMX markers. The 0·9 kb GFP reporters consist of wild‐type GFP or GFP‐S65T coding sequences, lacking the ATG, fused to the S. cerevisiae ADH1 terminator. PCR‐synthesized 2·4 kb‐long double modules flanked by 40–45 bp‐long guide sequences were successfully targeted to the carboxy‐terminus of a number of S. cerevisiae genes. We could estimate that only about 10% of the transformants carried inactivating mutations in the GFP reporter.

Contribution of the Endoplasmic Reticulum to Peroxisome Formation

How peroxisomes are formed in eukaryotic cells is unknown but important for insight into a variety of diseases. Both human and yeast cells lacking peroxisomes due to mutations in PEX3 or PEX19 genes regenerate the organelles upon reintroduction of the corresponding wild-type version. To evaluate how and from where new peroxisomes are formed, we followed the trafficking route of newly made YFP-tagged Pex3 and Pex19 proteins by real-time fluorescence microscopy in Saccharomyces cerevisiae. Remarkably, Pex3 (an integral membrane protein) could first be observed in the endoplasmic reticulum (ER), where it concentrates in foci that then bud off in a Pex19-dependent manner and mature into fully functional peroxisomes. Pex19 (a farnesylated, mostly cytosolic protein) enriches first at the Pex3 foci on the ER and then on the maturing peroxisomes. This trafficking route of Pex3-YFP is the same in wild-type cells. These results demonstrate that peroxisomes are generated from domains in the ER.

Sequence and analysis of chromosome 2 of Dictyostelium discoideum

The genome of the lower eukaryote Dictyostelium discoideum comprises six chromosomes. Here we report the sequence of the largest, chromosome 2, which at 8 megabases (Mb) represents about 25% of the genome. Despite an A + T content of nearly 80%, the chromosome codes for 2,799 predicted protein coding genes and 73 transfer RNA genes. This gene density, about 1 gene per 2.6 kilobases (kb), is surpassed only by Saccharomyces cerevisiae (one per 2 kb) and is similar to that of Schizosaccharomyces pombe (one per 2.5 kb). If we assume that the other chromosomes have a similar gene density, we can expect around 11,000 genes in the D. discoideum genome. A significant number of the genes show higher similarities to genes of vertebrates than to those of other fully sequenced eukaryotes. This analysis strengthens the view that the evolutionary position of D. discoideum is located before the branching of metazoa and fungi but after the divergence of the plant kingdom, placing it close to the base of metazoan evolution.

Functional selection and analysis of yeast centromeric DNA

A direct selection procedure has been used to isolate 11 distinct yeast genomic DNA fragments that eliminate the extreme segregation bias characteristic of autonomously replicating yeast plasmids. The selection scheme takes advantage of the fact that the cloned ochre suppressing tRNA gene, SUP11, is lethal at high copy number and therefore causes cell death when present on an ARS plasmid that lacks a cis-acting partition function. Each of the cloned DNA sequences was mapped to specific yeast chromosomes by hybridization to chromosome-sized DNA molecules separated by alternating field electrophoresis. Ten of the cloned fragments correspond to chromosomal centromeres; one fragment corresponds to the cis-acting locus required for endogenous 2 mu plasmid stability. Nucleotide sequence comparison of the ten centromere DNAs gives a new picture of conserved centromere DNA elements.

CPF1, a yeast protein which functions in centromeres and promoters.

Centromeres and several promoters of Saccharomyces cerevisiae contain a highly conserved octanucleotide, RTCACRTG, called CDEI. Using biochemical, genetic and structural analyses, we show that the same protein binds in vivo to CDEI sites in centromeres and in promoters. This protein, called CPF1 for centromere promoter factor, binds DNA as a dimer. Inactivation of the gene is not lethal but leads to a partial loss of the centromere function and to a Met‐ phenotype. Changes of the chromatin structure due to inactivation of CPF1 are seen at centromeres and at several CDEI‐carrying promoters (e.g. MET25, TRP1, GAL2). However promoter activities are affected in diverse ways making it presently difficult to describe a function for CPF1 in gene expression. The sequence of the cloned gene reveals in the carboxy‐terminal part two potential amphipathic helices preceded by a positively charged stretch of amino acids very similar to the helix‐loop‐helix domains recently identified in factors controlling tissue specific transcription in higher eukaryotes. Carboxy‐terminal truncations of CPF1 lacking this domain no longer bind to CDEI. The amino‐terminal half of CPF1 carries two clusters of negatively charged amino acid residues. Surprisingly, deletions of these clusters still render cells Met+ and lead only to a marginal decrease in centromere activity.

PCR-based gene targeting in the filamentous fungus Ashbya gossypii

We have investigated a PCR-based approach for one-step gene targeting in the filamentous fungus Ashbya gossypii. Short guide sequences with 40-46 bp of homology to two sequences of a targeted gene, provided by PCR, were sufficient to mediate homologous recombination. The PCR products used for transformation were generated from the newly constructed chimeric selection marker GEN3. This consists of the open reading frame of the Escherichia coli kanR gene under the control of promoter and terminator sequences of the Saccharomyces cerevisiae TEF2 gene and allows selection of G418/geneticin-resistant transformants. Verification of gene targeting was performed either by PCR or by DNA hybridization analyses, and in all 18 cases tested, correct targeting was confirmed. This approach was used for the complete deletion of the open reading frame of the A. gossypii RHO4 gene for which a double-strand sequence was available as information source for the design of PCR primers. We also demonstrated successful partial deletion of four other ORFs using single-read sequences (SRS) as sole information for the design of targeting primers. A gossypii is the first filamentous fungus in which a PCR-based gene disruption technique has been established. Since short target guide sequences are sufficient to direct homologous integration into the A. gossypii genome it is not necessary to obtain and sequence large DNA fragments from a target locus to provide the long flanking homology regions usually required for efficient targeting of cloned disruption cassettes in filamentous fungi. Thus functional analysis of A. gossypii genes is already possible, based on single-pass sequence information.