Peter Rahbek Østergaard

Characterization of a Coprinus cinereus laccase

A wild-type Coprinus cinereus laccase and its recombinant form expressed in an Aspergillus oryzae host have been purified and characterized. The mature laccase had a molecular mass of 58 kDa by mass spectrometry, an isoelectric point near 4, and two absorption maxima at 278 and 614 nm. Photometric titration with 2,2′-biquinoline showed a Cu/protein(subunit) stoichiometry of ≈4. The electron paramagnetic resonance spectrum showed typical type 1 and type 2 Cu signals, and the circular dichroism showed a typical coordination geometry of the type 1 Cu(II). At pH 5.5, the enzyme had a redox potential of 0.55 V vs. normal hydrogen electrode at its type 1 site. The laccase could oxidize 2,2′-azinobis(3-ethylbenzthiazoline-6-sulfonate) and syringaldazine with optimum pH of 4 and 6.5, respectively. Halides inhibited the laccase. At pH 8.5, the laccase had an optimum temperature between 60°C and 70°C. At the same pH, the laccase had a half-life of >200 or 21.8 min in the presence of 0 or 2 mM H2O2, respectively, at 40°C. Mediated by several phenols and phenothiazines, the laccase was able to oxidatively bleach Direct Blue 1 dye at alkaline pH, making it a promising industrial enzyme candidate.

Expression, Gene Cloning, and Characterization of Five Novel Phytases from Four Basidiomycete Fungi: Peniophora lycii, Agrocybe pediades ,a Ceriporia sp., and Trametes pubescens

ABSTRACT Phytases catalyze the hydrolysis of phosphomonoester bonds of phytate (myo-inositol hexakisphosphate), thereby creating lower forms of myo-inositol phosphates and inorganic phosphate. In this study, cDNA expression libraries were constructed from four basidiomycete fungi (Peniophora lycii, Agrocybe pediades, a Ceriporia sp., and Trametes pubescens) and screened for phytase activity in yeast. One full-length phytase-encoding cDNA was isolated from each library, except for the Ceriporia sp. library where two different phytase-encoding cDNAs were found. All five phytases were expressed inAspergillus oryzae, purified, and characterized. The phytases revealed temperature optima between 40 and 60°C and pH optima at 5.0 to 6.0, except for the P. lycii phytase, which has a pH optimum at 4.0 to 5.0. They exhibited specific activities in the range of 400 to 1,200 U · mg, of protein−1 and were capable of hydrolyzing phytate down tomyo-inositol monophosphate. Surprisingly, 1H nuclear magnetic resonance analysis of the hydrolysis of phytate by all five basidiomycete phytases showed a preference for initial attack at the 6-phosphate group of phytic acid, a characteristic that was believed so far not to be seen with fungal phytases. Accordingly, the basidiomycete phytases described here should be grouped as 6-phytases (EC 3.1.3.26 ).

The Structure of the Small Laccase from Streptomyces coelicolor Reveals a Link between Laccases and Nitrite Reductases.

The X-ray structure of the two-domain laccase (small laccase) from Streptomyces coelicolor A3(2) was solved at 2.7-A resolution. The enzyme differs significantly from all laccases studied structurally so far. It consists of two domains and forms trimers and hence resembles the quaternary structure of nitrite reductases or ceruloplasmins more than that of large laccases. There are three trinuclear copper clusters in the enzyme localized between domains 1 and 2 of each pair of neighbor chains. In this way, a similar geometry of the active site as seen in large laccases is ensured, albeit by different arrangements of domains and protein chains. Three copper ions of type 1 lie close to one another near the surface of the central part of the trimer, and, effectively, a trimeric substrate binding site is formed in their vicinity.

Understanding the plasticity of the alpha/beta hydrolase fold: lid swapping on the Candida antarctica lipase B results in chimeras with interesting biocatalytic properties.

The best of both worlds. Long molecular dynamics (MD) simulations of Candida antarctica lipase B (CALB) confirmed the function of helix α5 as a lid structure. Replacement of the helix with corresponding lid regions from CALB homologues from Neurospora crassa and Gibberella zeae resulted in new CALB chimeras with novel biocatalytic properties. The figure shows a snapshot from the MD simulation.

Trypsin Revisited: CRYSTALLOGRAPHY AT (SUB) ATOMIC RESOLUTION AND QUANTUM CHEMISTRY REVEALING DETAILS OF CATALYSIS.

A series of crystal structures of trypsin, containing either an autoproteolytic cleaved peptide fragment or a covalently bound inhibitor, were determined at atomic and ultra-high resolution and subjected to ab initio quantum chemical calculations and multipole refinement. Quantum chemical calculations reproduced the observed active site crystal structure with severe deviations from standard stereochemistry and indicated the protonation state of the catalytic residues. Multipole refinement directly revealed the charge distribution in the active site and proved the validity of the ab initio calculations. The combined results confirmed the catalytic function of the active site residues and the two water molecules acting as the nucleophile and the proton donor. The crystal structures represent snapshots from the reaction pathway, close to a tetrahedral intermediate. The de-acylation of trypsin then occurs in true SN2 fashion.

Structural and Mutational Analyses of the Interaction between the Barley alpha-Amylase/Subtilisin Inhibitor and the Subtilisin Savinase Reveal a Novel Mode of Inhibition

Subtilisins represent a large class of microbial serine proteases. To date, there are three-dimensional structures of proteinaceous inhibitors from three families in complex with subtilisins in the Protein Data Bank. All interact with subtilisin via an exposed loop covering six interacting residues. Here we present the crystal structure of the complex between the Bacillus lentus subtilisin Savinase and the barley alpha-amylase/subtilisin inhibitor (BASI). This is the first reported structure of a cereal Kunitz-P family inhibitor in complex with a subtilisin. Structural analysis revealed that BASI inhibits Savinase in a novel way, as the interacting loop is shorter than loops previously reported. Mutational analysis showed that Thr88 is crucial for the inhibition, as it stabilises the interacting loop through intramolecular interactions with the BASI backbone.

Structure of two fungal β-1,4-galactanases: Searching for the basis for temperature and pH optimum

β‐1,4‐Galactanases hydrolyze the galactan side chains that are part of the complex carbohydrate structure of the pectin. They are assigned to family 53 of the glycoside hydrolases and display significant variations in their pH and temperature optimum and stability. Two fungal β‐1,4‐galactanases from Myceliophthora thermophila and Humicola insolens have been cloned and heterologously expressed, and the crystal structures of the gene products were determined. The structures are compared to the previously only known family 53 structure of the galactanase from Aspergillus aculeatus (AAGAL) showing ∼56% identity. The M. thermophila and H. insolens galactanases are thermophilic enzymes and are most active at neutral to basic pH, whereas AAGAL is mesophilic and most active at acidic pH. The structure of the M. thermophila galactanase (MTGAL) was determined from crystals obtained with HEPES and TRIS buffers to 1.88 Å and 2.14 Å resolution, respectively. The structure of the H. insolens galactanase (HIGAL) was determined to 2.55 Å resolution. The thermostability of MTGAL and HIGAL correlates with increase in the protein rigidity and electrostatic interactions, stabilization of the α‐helices, and a tighter packing. An inspection of the active sites in the three enzymes identifies several amino acid substitutions that could explain the variation in pH optimum. Examination of the activity as a function of pH for the D182N mutant of AAGAL and the A90S/ H91D mutant of MTGAL showed that the difference in pH optimum between AAGAL and MTGAL is at least partially associated with differences in the nature of residues at positions 182, 90, and/or 91.

Crystallization and preliminary X-ray analysis of the laccase from Coprinus cinereus.

The laccase from the fungus Coprinus cinereus has been prepared and crystallized in a form suitable for X-ray diffraction analysis. Small plate-like crystals of an enzymatically deglycosylated form of the enzyme have been grown by the hanging-drop method using polyethylene glycol as precipitant. These crystals diffract to at least 2.2 A. They belong to the space group P2(1)2(1)2(1) with cell dimensions a = 45.4, b = 85.7, c = 143.1 A with a single molecule of laccase in the asymmetric unit.

Fusarium oxysporum trypsin at atomic resolution at 100 and 283 K: a study of ligand binding

The X-ray structure of F. oxysporum trypsin has been determined at atomic resolution, revealing electron density in the binding site which was interpreted as a peptide bound in the sites S1, S2 and S3. The structure, which was initially determined at 1.07 A resolution and 283 K, has an Arg in the S1 specificity pocket. The study was extended to 0.81 A resolution at 100 K using crystals soaked in Arg, Lys and Gln to study in greater detail the binding at the S1 site. The electron density in the binding site was compared between the different structures and analysed in terms of partially occupied and overlapping components of peptide, solvent water and possibly other chemical moieties. Arg-soaked crystals reveal a density more detailed but similar to the original structure, with the Arg side chain visible in the S1 pocket and residual peptide density in the S2 and S3 sites. The density in the active site is complex and not fully interpreted. Lys at high concentrations displaces Arg in the S1 pocket, while some main-chain density remains in sites S2 and S3. Gln has been shown not to bind. The free peptide in the S1-S3 sites binds in a similar way to the binding loop of BPTI or the inhibitory domain of the Alzheimers beta-protein precursor, with some differences in the S1 site.

A Quick Solution: Ab Initio Structure Determination of a 19 kDa Metalloproteinase Using Acorn

A data set from the metalloproteinase deuterolysin was collected at atomic resolution (1.0 A) with synchrotron radiation. The high resolution allowed the structure to be solved with the new direct-methods program ACORN using the coordinates of the Zn atom as a starting point. The phases obtained from ACORN were of sufficient quality to allow automated building to be carried out in ARP/wARP. Minimal manual rebuilding of the model was required and the structure determination was completed using the maximum-likelihood refinement program REFMAC. The whole process, starting from the processed and merged data and ending with a refined model, required less than 6 h of computational time.