Peter Sieczkarek

Improved Tool Surfaces for Incremental Bulk Forming Processes of Sheet Metals

Sheet-bulk metal forming is a process used to manufacture load-adapted parts with high precision. However, bulk forming of sheet metals requires high forces, and thus tools applied for the operational demand have to withstand very high contact pressures, which lead to high wear and abrasion. The usage of conventional techniques like hardening and coating in order to reinforce the surface resistance are not sufficient enough in this case. In this paper, the tool resistance is improved by applying filigree bionic structures, especially structures adapted from the Scarabaeus beetle to the tool’s surface. The structures are realized by micromilling. Despite the high hardness of the tool material, very precise patterns are machined successfully using commercially available ball-end milling cutters. The nature-adapted surface patterns are combined with techniques like plasma nitriding and PVD coating, leading to a multilayer coating system. The effect of process parameters on the resistance of the tools is analyzed experimentally and compared to a conventional, unstructured, uncoated, only plasma nitrided forming tool. Therefore, the tools are used for an incremental bulk forming process on 2 mm thick metal sheets made of aluminum. The results show that the developed methodology is feasible to reduce the process forces and to improve the durability of the tools.

Manufacturing of functional elements by sheet-bulk metal forming processes

Due to increasing economic and ecological restrictions, conventional sheet and bulk forming operations often reach their limits with regard to part weight and functional integration. One solution to meet those challenges is provided by sheet-bulk metal forming (SBMF) processes. SBMF is defined as the application of bulk forming operations on sheet metal. SBMF can be combined with conventional sheet forming operations and offers the opportunity to form highly functional integrated parts out of sheet metal. It contains the benefit of an optimization of the part weight and a shortening of the process chain. Recent research has found different solutions regarding the actual implementation of SBMF in several process variants. In this paper, a categorisation for functional elements on sheet metal parts is proposed. A selection of possible approaches for their manufacturing is presented. The process variants are compared by means of the main process characteristics. By these means, the choice of a suitable option shall be facilitated for practical manufacturing design and for a particular relevant product.

Novel Five-Axis Forming Press for the Incremental Sheet-Bulk Metal Forming

The incremental procedure of sheet-bulk metal forming was classified into two different forming sequences, the discrete and the continuous. Based on these two groups, a movement matrix was developed, which captures required kinematic motions to manufacture a variety of functional components. With the objective of producing near-net-shape workpiece geometries within the Collaborative Research Centre TR73 – sheet-bulk metal forming, the required positioning accuracies of conventional metal forming machines exceed the current state of the art. Therefore, a suitable machine concept was developed and realized. This new machine represents a unique prototype for a flexible application of bulk forming operations to 2 – 3 mm sheets with five motion axes. During continuous forming, such as rolling, and also during simultaneous operations, increased lateral forces prevail. The machine was provided with a high stiffness. That enables a positioning accuracy which, also under load and at rest, correlates the high demands of the sheet-bulk metal forming within a range of ±0.01 mm.

Innovative Tools to Improve Incremental Bulk Forming Processes

Sheet-bulk metal forming is an innovative process with a high potential to generate load-adapted parts with high precision. Bulk forming processes of sheet metals especially require high process forces, resulting in an intense contact pressure and, thus, in a very high abrasive and adhesive wear. As a method to reduce or avoid these common wear phenomena, even hardened or coated tool surfaces are not sufficient. The objective of this paper is to show an improvement of the tool resistance during an incremental forming process by an adapted tool design and the application of structured tool surfaces combined with coatings. For the tool surface the structure of the scarabaeus beetle serves as the basis for a bionic structure. This structure was manufactured by micromilling. Despite the high hardness of the tool material and the complex geometry of the forming tools, very precise patterns were machined successfully using ball-end milling cutters. The combination of bionic structures with coating techniques like physical vapor deposition (PVD) on plasma nitrided tool surfaces is very promising. In this work, the influence of process parameters (workpiece material, lubrication, tool design, stepwise infeed) on the tool resistance during the forming operation was analyzed experimentally. The results of the optimized forming tools were compared to conventional, unstructured, uncoated, and only plasma nitrided forming tools. The different tools were applied to 2 mm thick metal sheets made of aluminum (AlMg3) and steel (non-alloy quality steel DC04). As a result, the process forces could be reduced by a modified shape and surface of the tools. Thus, the lifetime of the tools can be enhanced.

Local forming of gears by indentation of sheets

The aim and objectives of this article are to provide an analytical model for the incremental forming of gears along the direction perpendicular to the sheet thickness. The model allows determining the influence of the major process parameters in the indentation force and in the material volume undergoing plastic deformation during indentation by means of double-wedge gear tooth punches. Special emphasis is placed on the influence of superimposing tension stresses along the in-plane direction. The analytical model is built upon the slip-line theory under plane strain deformation conditions, and results are compared against those obtained from experiments in DC04 mild steel and from numerical simulations performed with the finite element method. Results show that the indentation force can be significantly reduced by stress superposition, and that a minimum distance from previous indentations is necessary to produce a new gear tooth in a material free from residual strains and stresses.

Improvement strategies for the formfilling in incremental gear forming processes

Incremental Sheet-Bulk Metal Forming offers an innovative and flexible approach for the manufacturing of gears. An insufficient formfilling of the generated gearing, especially of the first tooth formed, is observed. Aiming for a formfilling improvement of the first tooth element, three influencing factors were investigated. First, the prevailing friction is analyzed and a possibility for its adjustment is offered by a tailored adaption of the tool surface topographies. These were manufactured by micromilling, EDM and polishing processes and partially covered by CrAlN PVD-coatings. Based on ring-compression tests, which were performed to determine the resulting friction conditions, the analyzed topographies were transferred onto real tool surfaces and used in the incremental gear forming process. Second, the influence on the formfilling of the blank cutting process and the resulting sheet edge properties were investigated. The third aspect to enhance the formfilling of the gear elements was the modification of the process strategy of the incremental forming process. Due to different conditions for the initial and the following indentations, a preforming operation was investigated in order to realize a similar material flow for all indentations. With the combination of the best parameters regarding the tool surface, the blank cutting process and the forming strategy, an improvement of the formfilling of the first formed gear element by up to 33% and for the following gears by up to 13% was achieved.