Petra Á. Szilágyi

Polymorphism and its effects on the magnetic behaviour of the [Fe(sal2-trien)][Ni(dmit)2] spin-crossover complex

The syntheses, structural characterisation, and magnetic and spectroscopic properties of three new polymorphs of the spin-crossover complex [Fe(sal2-trien)][Ni(dmit)2] are reported. The results are discussed as a function of their intra- and intermolecular arrangement. Correlation of their crystal structures and magnetic properties suggest that some torsion angles play a significant role in the magnetic properties of this class of compounds. Intermolecular contacts are also of importance, and the nature of the short contacts between molecular species seems to be more crucial than their number in the allowance of spin-crossover.

Post-synthetic cation exchange in the robust metal–organic framework MIL-101(Cr)

In this work an unambiguous proof of post-synthetic solvent-assisted cation exchange in the robust metal–organic framework MIL-101(Cr) is reported. Such substitution can alter directly the secondary building unit, which often defines the properties of the material.

Probing hydrogen spillover in Pd@MIL-101(Cr) with a focus on hydrogen chemisorption

Palladium nanoparticles can split the dihydrogen bond and produce atomic hydrogen. When the metal nanoparticles are in intimate contact with a hydrogen-atom host, chemisorption of H-atoms by the host has been suggested to occur via the hydrogen spillover mechanism. Metal-organic frameworks were predicted to be able to act as effective chemisorption sites, and increased ambient-temperature hydrogen adsorption was reported on several occasions. The intimate contact was supposedly ensured by the use of a carbon bridge. In this work, we show that it is possible to introduce catalyst palladium particles into MOFs pores and simultaneously ensuring good contact, making the employment of the carbon bridge redundant. The addition of Pd nanoparticles indeed increases the ambient-temperature hydrogen uptake of the framework, but this is found to be solely due to palladium hydride formation. In addition, we show that the hydrogen atoms do not chemisorb on the host framework, which excludes the possibility of hydrogen spillover.

Detailed Spectroscopic, Thermodynamic, and Kinetic Studies on the Protolytic Equilibria of FeIIIcydta and the Activation of Hydrogen Peroxide

The crystal structure of the as-yet-unknown salt K[Fe(III)(cydta)(H(2)O)].3H(2)O, where cydta = (+/-)-trans-1,2-cyclohexanediaminetetraacetate, has been resolved: orthorhombic space group Pbca with R1 = 0.0309, wR2 = 0.0700, and GOF = 0.99. There are two independent [Fe(III)(cydta)(H(2)O)](-) anions in the asymmetric unit, and the ligand is (R,R)-cydta in both cases. The coordination polyhedron is a seven-coordinate capped trigonal prism where the quadrilateral face formed by the four ligand donor oxygen atoms is capped by the coordinated water molecule. The speciation of [Fe(III)(cydta)(H(2)O)](-) in water was studied in detail by a combination of techniques: (i) Measurements of the pH dependence of the Fe(III/II)cydta redox potentials by cyclic voltammetry enabled the estimation of the stability constants (0.1 M KNO(3), 25 degrees C) of [Fe(III)(cydta)(H(2)O)](-) (log beta(III)(110) = 29.05 +/- 0.01) and [Fe(II)(cydta)(H(2)O)](2-) (log beta(II)(110) = 17.96 +/- 0.01) as well as pK(III)(a1OH) = 9.57 and pK(II)(a1H) = 2.69. The formation enthalpy of [Fe(III)(cydta)(H(2)O)](-) (DeltaH degrees = -23 +/- 1 kJ mol(-1)) was measured by direct calorimetry and is compared to the corresponding value for [Fe(III)(edta)(H(2)O)](-) (DeltaH degrees = -31 +/- 1 kJ mol(-1)). (ii) pH-dependent spectrophotometric titrations of Fe(III)cydta lead to pK(III)(a1OH) = 9.54 +/- 0.01 for deprotonation of the coordinated water and a dimerization constant of log K(d) = 1.07. These data are compared with those of Fe(III)pdta (pdta = 1,2-propanediaminetetraacetate; pK(III)(a1OH) = 7.70 +/- 0.01, log K(d) = 2.28) and Fe(III)edta (pK(III)(a1OH) = 7.52 +/- 0.01, log K(d) = 2.64). Temperature- and pressure-dependent (17)O NMR measurements lead to the following kinetic parameters for the water-exchange reaction at [Fe(III)(cydta)(H(2)O)](-) (at 298 K): k(ex) = (1.7 +/- 0.2) x 10(7) s(-1), DeltaH(++) = 40.2 +/- 1.3 kJ mol(-1), DeltaS(++) = +28.4 +/- 4.7 J mol(-1) K(-1), and DeltaV(++) = +2.3 +/- 0.1 cm(3) mol(-1). A detailed kinetic study of the effect of the buffer, temperature, and pressure on the reaction of hydrogen peroxide with [Fe(III)(cydta)(H(2)O)](-) was performed using stopped-flow techniques. The reaction was found to consist of two steps and resulted in the formation of a purple Fe(III) side-on-bound peroxo complex [Fe(III)(cydta)(eta(2)-O(2))](3-). The peroxo complex and its degradation products were characterized using Mossbauer spectroscopy. Formation of the purple peroxo complex is only observable above a pH of 9.5. Both reaction steps are affected by specific and general acid catalysis. Two different buffer systems were used to clarify the role of general acid catalysis in these reactions. Mechanistic descriptions and a comparison between the edta and cydta systems are presented. The first reaction step reveals an element of reversibility, which is evident over the whole studied pH range. The positive volume of activation for the forward reaction and the positive entropy of activation for the backward reaction suggest a dissociative interchange mechanism for the reversible end-on binding of hydrogen peroxide to [Fe(III)(cydta)(H(2)O)](-). Deprotonation of the end-on-bound hydroperoxo complex leads to the formation of a seven-coordinate side-on-bound peroxo complex [Fe(III)(cydta)(eta(2)-O(2))](3-), where one carboxylate arm is detached. [Fe(III)(cydta)(eta(2)-O(2))](3-) can be reached by two different pathways, of which one is catalyzed by a base and the other by deprotonated hydrogen peroxide. For both pathways, a small negative volume and entropy of activation was observed, suggesting an associative interchange mechanism for the ring-closure step to the side-on-bound peroxo complex. For the second reaction step, no element of reversibility was found.

The Impact of Post-Synthetic Linker Functionalization of MOFs on Methane Storage: The Role of Defects

Natural gas is increasingly being viewed as one of the most viable alternatives to gasoline. Its vehicular application however will only be widespread if safe and high-capacity methane stores are developed. In this work report an over 33% increase in methane uptake on a post-synthetically modified metal-organic framework. The underlying mechanism for this dramatic increase is due to lattice defects formed upon post-synthetic modification. This method may open new approaches to natural gas storage.

Controlling embedment and surface chemistry of nanoclusters in metal-organic frameworks†

A combined theoretical and experimental approach demonstrates that nanocluster embedment into the pores of metal-organic frameworks (MOF) may be influenced by the chemical functionalisation of the MOF. Furthermore, this results in the surface functionalisation of the embedded nanoclusters, highlighting the potential of MOF scaffolds for the design and synthesis of novel functional materials.

Functionalised metal-organic frameworks: a novel approach to stabilising single metal atoms

We have investigated the potential of metal–organic frameworks for immobilising single atoms of transition metals using a model system of Pd supported on NH2-MIL-101(Cr). Our transmission electron microscopy and in situ Raman spectroscopy results give evidence for the first time that functionalised metal–organic frameworks may support, isolate and stabilise single atoms of palladium. Using thermal desorption spectroscopy we were able to evaluate the proportion of single Pd atoms. Furthermore, in a combined theoretical-experimental approach, we show that the H–H bonds in a H2 molecule elongate by over 15% through the formation of a complex with single atoms of Pd. Such deformation would affect any hydrogenation reaction and thus the single atoms supported on metal–organic frameworks may become promising single atom catalysts in future.

Contaminant-resistant MOF–Pd composite for H2 separation

The drive to use hydrogen as energy carrier or reducing agent to synthesise hydrocarbons boosts its demand, requiring affordable and reliable separation methods. In this work, the combination of a selective but vulnerable Pd thin film with a robust metal–organic framework (MOF) yielding a contaminant-resistant composite membrane for hydrogen separation is reported.