Philip Bigelow

Searching for needles in a haystack: Identifying innovations to prevent MSDs in the construction sector

This study identified innovations that could potentially reduce the risk of MSDs in the construction sector. The action research approach was based on a collaborative model of researchers working with workplace representatives. We searched for innovations being used by construction companies. From a potential database of 125 innovations, the study focused on 20 innovations that varied in their penetration into worksites in the geographical area, represented a variety of trades, and were a cross-section of tools and work organizational processes. It examined the attributes of the innovations, and the barriers to their adoption. The analysis was based on observations of workers, surveys of workers and construction-safety consultants, and company interviews. The study found that innovations were adopted by companies for multiple advantages including productivity and quality, but not necessarily ability to reduce MSD risks, their non-complexity, and cost. The major barriers for adoption were the traditional culture of the construction sector rather than financial ones.

Spreading good ideas: A case study of the adoption of an innovation in the construction sector

A health and safety association collaborated with two research centres to examine the dissemination of knowledge of an ergonomic intervention by opinion leaders in the construction sector. The intervention was a hydraulic ladder lift that aided with loading and unloading of ladders off van roofs. Thirteen companies, with five to 900 employees, were involved. The van operators informed workmates not employed by their companies but who worked on the same site as them about the intervention. The opinion leaders informed decision makers within their companies which led to commitments to purchase similar units. They also gave presentations at prearranged health and safety meetings, where attendees indicated that they thought the intervention sounded like a good idea. In this way, knowledge of the innovation reached at least 32 more companies and potentially several thousand other employees. The study showed the potential for workplace change to be exponential.

Effectiveness of health and safety in small enterprises: a systematic review of quantitative evaluations of interventions.

Introduction This systematic review was conducted to identify effective occupational health and safety interventions for small businesses. Methods The review focused on peer-reviewed intervention studies conducted in small businesses with 100 or fewer employees, that were published in English and several other languages, and that were not limited by publication date. Multidisciplinary members of the review team identified relevant articles and assessed their quality. Studies assessed as medium or high quality had data extracted, which was then synthesized. Results Five studies were deemed of medium or high quality, and proceeded to data extraction and evidence synthesis. The types of interventions identified: a combination of training and safety audits; and a combination of engineering, training, safety audits, and a motivational component, showed a limited amount of evidence in improving safety outcomes. Overall, this evidence synthesis found a moderate level of evidence for intervention effectiveness, and found no evidence that any intervention had adverse effects. Conclusions Even though there were few studies that adequately evaluated small business intervention, several studies demonstrate that well-designed evaluations are possible with small businesses. While stronger levels of evidence are required to make recommendations, these interventions noted above were associated with positive changes in safety-related attitudes and beliefs and workplace parties should be aware of them.

How compatible are participatory ergonomics programs with occupational health and safety management systems

OBJECTIVES Musculoskeletal disorders (MSD) are a major cause of pain, disability, and costs. Prevention of MSD at work is frequently described in terms of implementing an ergonomics program, often a participatory ergonomics (PE) program. Most other workplace injury prevention activities take place under the umbrella of a formal or informal occupational health and safety management system (OHSMS). This study assesses the similarities and differences between OHSMS and PE as such knowledge could help improve MSD prevention activities. Methods Using the internationally recognized Occupational Health and Safety Assessment Series (OHSAS 18001), 21 OHSMS elements were extracted. In order to define PE operationally, we identified the 20 most frequently cited papers on PE and extracted content relevant to each of the OHSAS 18001 elements. RESULTS The PE literature provided a substantial amount of detail on five elements: (i) hazard identification, risk assessment and determining controls; (ii) resources, roles, responsibility, accountability, and authority; (iii) competence, training and awareness; (iv) participation and consultation; and (v) performance measurement and monitoring. However, of the 21 OHSAS elements, the PE literature was silent on 8 and provided few details on 8 others. CONCLUSIONS The PE literature did not speak to many elements described in OHSMS and even when it did, the language used was often different. This may negatively affect the effectiveness and sustainability of PE initiatives within organizations. It is expected that paying attention to the approaches and language used in management system frameworks could make prevention of MSD activities more effective and sustainable.

Digging into construction: social networks and their potential impact on knowledge transfer.

OBJECTIVE A six-year study is exploring the most effective ways to disseminate ideas to reduce musculoskeletal disorders (MSDs) in the construction sector. The sector was targeted because MSDs account for 35% of all lost time injuries. This paper reports on the organization of the construction sector, and maps potential pathways of communication, including social networks, to set the stage for future dissemination. PARTICIPANTS The managers, health and safety specialists, union health and safety representatives, and 28 workers from small, medium and large construction companies participated. METHODS Over a three-year period, data were collected from 47 qualitative interviews. Questions were guided by the PARIHS (Promoting Action on Research Implementation in Health Services) knowledge-transfer conceptual framework and adapted for the construction sector. FINDINGS The construction sector is a complex and dynamic sector, with non-linear reporting relationships, and divided and diluted responsibilities. Four networks were identified that can potentially facilitate the dissemination of new knowledge: worksite-project networks; union networks; apprenticeship program networks; and networks established by the Construction Safety Association/Infrastructure Health and Safety Association. CONCLUSIONS Flexible and multi-directional lines of communication must be used in this complex environment. This has implications for the future choice of knowledge transfer strategies.

The impact of psychological factors on self-reported sleep disturbance among people living in the vicinity of wind turbines.

Canadas wind energy capacity has grown from approximately 137MW (MW) in 2000 to over 9700MW in 2014, and this progressive development has made Canada the fifth-largest market in the world for the installation of new wind turbines (WTs). Although wind energy is now one of the fastest growing sources of power in Canada and many other countries, the growth in both number and size of WTs has raised questions regarding potential health impacts on individuals who live close to such turbines. This study is the first published research using a prospective cohort design, with noise and sleep measurements obtained before and after installation of WTs to investigate effect of such turbines on self-reported sleep disturbances of nearby residents. Subjective assessment of sleep disturbance was conducted in Ontario, Canada through standard sleep and sleepiness scales, including the Pittsburgh Sleep Quality Index (PSQI), Insomnia Severity Index (ISI), and Epworth daytime Sleepiness Scale (ESS). Both audible and infra-sound noises were also measured inside the bedroom. Descriptive and comparison analyses were performed to investigate the effect of WT exposure on sleep data. Results of the analysis show that participants reported poorer sleep quality if they had a negative attitude to WTs, if they had concerns related to property devaluation, and if they could see turbines from their properties. This study provides evidence for the role of individual differences and psychological factors in reports of sleep disturbance by people living in the vicinity of WTs.

Detecting within- and between-day manifestations of neuromuscular fatigue at work: an exploratory study

Cumulative neuromuscular fatigue may result from exposure to physically demanding work, such as repetitive and/or sustained work with insufficient recovery. The aims of this exploratory study were to develop a battery of field usable fatigue measures and to document hand/arm fatigue in physically demanding work over multiple workdays and after a weekend break. Sixteen plumbers were observed for five days and measures of handgrip force, variability, tremor and discomfort were obtained pre-, mid- and post-shift. This exploratory study demonstrated increasing fatigue of the hand/arm over the day and persistent fatigue from Tuesday to Friday, and that a number of the measures did not return to baseline values following a weekend break. The findings provide preliminary evidence of cumulative fatigue in residential plumbing and insight into neuromuscular fatigue measurement. However, further work is needed to develop and refine a set of fatigue measures to detect neuromuscular fatigue at the workplace. Practitioner Summary: Cumulative fatigue has been linked to long-term health outcomes, including work-related musculoskeletal disorders. This paper presents findings from a physically demanding job (i.e. plumbing) revealing persistent fatigue over the work shift(s) and insufficient recovery after a weekend break, and provides insight into fatigue measurement at the workplace.

Before-after field study of effects of wind turbine noise on polysomnographic sleep parameters.

Wind is considered one of the most advantageous alternatives to fossil energy because of its low operating cost and extensive availability. However, alleged health-related effects of exposure to wind turbine (WT) noise have attracted much public attention and various symptoms, such as sleep disturbance, have been reported by residents living close to wind developments. Prospective cohort study with synchronous measurement of noise and sleep physiologic signals was conducted to explore the possibility of sleep disturbance in people hosting new industrial WTs in Ontario, Canada, using a pre and post-exposure design. Objective and subjective sleep data were collected through polysomnography (PSG), the gold standard diagnostic test, and sleep diary. Sixteen participants were studied before and after WT installation during two consecutive nights in their own bedrooms. Both audible and infrasound noises were also concurrently measured inside the bedroom of each participant. Different noise exposure parameters were calculated (LAeq, LZeq) and analyzed in relation to whole-night sleep parameters. Results obtained from PSG show that sleep parameters were not significantly changed after exposure. However, reported sleep qualities were significantly (P = 0.008) worsened after exposure. Average noise levels during the exposure period were low to moderate and the mean of inside noise levels did not significantly change after exposure. The result of this study based on advanced sleep recording methodology together with extensive noise measurements in an ecologically valid setting cautiously suggests that there are no major changes in the sleep of participants who host new industrial WTs in their community. Further studies with a larger sample size and including comprehensive single-event analyses are warranted.

Prevention of musculoskeletal disorders within management systems: A scoping review of practices, approaches, and techniques.

The purpose of this study was to identify and summarize the current research evidence on approaches to preventing musculoskeletal disorders (MSD) within Occupational Health and Safety Management Systems (OHSMS). Databases in business, engineering, and health and safety were searched and 718 potentially relevant publications were identified and examined for their relevance. Twenty-one papers met the selection criteria and were subjected to thematic analysis. There was very little literature describing the integration of MSD risk assessment and prevention into management systems. This lack of information may isolate MSD prevention, leading to difficulties in preventing these disorders at an organizational level. The findings of this review argue for further research to integrate MSD prevention into management systems and to evaluate the effectiveness of the approach.

The impact of different seats and whole-body vibration exposures on truck driver vigilance and discomfort

Abstract Laboratory studies have shown that exposure to whole-body vibration (WBV) increases physical and mental fatigue, which are common issues professional drivers face. The objective of this study was to determine whether altering WBV exposures had any effect on driver vigilance and discomfort. A repeated measures crossover design of five truck drivers with regular 10-h routes was used. Active and passive suspension truck seats were evaluated. For each seat, WBV exposures were measured. Participants completed a discomfort questionnaire and a reaction time task before and after their shift for two weeks, one week per seat. Compared with the passive seat, the active seat significantly reduced WBV exposures, decrements in the optimal and mean reaction times (p = 0.02, 0.047, respectively), and discomfort in the lower back and wrist(s)/forearm(s) (p < 0.01, 0.01, respectively). Study results indicated that reducing WBV helps reduce discomfort and maintain vigilance, which may improve drivers’ health and reduce the risk of truck collisions. Practitioner Summary: The active suspension seat used in this study reduced truck drivers’ exposure to whole-body vibration (WBV) by over 33% in relation to their current industry standard passive suspension seat. This study demonstrated that reducing truck drivers’ exposure to WBV reduced fatigue and discomfort development over a workday.