Philippe Maincent

PLGA in situ implants formed by phase inversion: critical physicochemical parameters to modulate drug release.

In situ forming implants (ISI) based on phase separation by solvent exchange represent an attractive alternative to conventional preformed implants and microparticles for parenteral applications. They are indeed easier to manufacture and their administration does not require surgery, therefore improving patient compliance. They consist of polymeric solutions precipitating at the site of injection and thus forming a drug eluting depot. Drug release from ISI is typically divided into three phases: burst during precipitation of the depot, diffusion of drug through the polymeric matrix and finally drug release by system degradation. This review gives a comprehensive overview on (i) the theoretical bases of these three phases, (ii) the parameters influencing them and (iii) the remaining drawbacks which have to be addressed to enlarge their commercial opportunities. Indeed, although some of them are already commercialized, ISI still suffer from limitations: mainly lack of reproducibility in depot shape, burst during solidification and potential toxicity. Nevertheless, depending on the targeted therapeutic application, these shortcomings may be transformed into advantages. As a result, keys are given in order to tailor these formulations in view of the desired application so that ISI could gain further clinical importance in the following years.

Engineered Nanoparticulate Drug Delivery Systems: The Next Frontier for Oral Administration?

For the past few decades, there has been a considerable research interest in the area of oral drug delivery using nanoparticle (NP) delivery systems as carriers. Oral NPs have been used as a physical approach to improve the solubility and the stability of active pharmaceutical ingredients (APIs) in the gastrointestinal juices, to enhance the intestinal permeability of drugs, to sustain and to control the release of encapsulated APIs allowing the dosing frequency to be reduced, and finally, to achieve both local and systemic drug targeting. Numerous materials have been used in the formulation of oral NPs leading to different nanoparticulate platforms. In this paper, we review various aspects of the formulation and the characterization of polymeric, lipid, and inorganic NPs. Special attention will be dedicated to their performance in the oral delivery of drug molecules and therapeutic genes.

Impact of gold nanoparticle coating on redox homeostasis

Gold nanoparticles (AuNP) hold great potential for biomedical applications. This study was aimed at examination of the effect of AuNP coating on the redox status of their environment. Two kinds of AuNP were tested, similar by shape and size, but with different surface coatings: either stabilized with citrate or functionalized with dihydrolipoic acid (Au@DHLA NP). Interestingly, whereas citrate-stabilized AuNP interact in vitro with reduced glutathione (GSH) and S-nitrosoglutathione, Au@DHLA NP do not interfere with both biomolecules. Albumin exhibits higher affinity toward citrate-stabilized AuNP than Au@DHLA NP, increasing their hydrodynamic diameter (8.0- and 1.3-fold, respectively). Furthermore, the AuNP coating affects also their internalization by macrophages (which was two fold higher for citrate-stabilized AuNP), following an exposure to a subtoxic NP concentration (10 nM, 80% viability). Citrate-stabilized AuNP were found to decrease the intracellular GSH level (ca. 20%), with no increase in reactive oxygen species production. Furthermore, these AuNP did not induce apoptosis (as shown by caspase-3 activity and nfkb2 transcription factor), and also did not activate gene expression related to oxidative stress (ncf1) and inflammatory response (tnfα). The present data highlight that the functionalization of AuNP with DHLA decreases their reactivity with biomolecules and cells, resulting in a promising medical platform.

Injectable PLA-based in situ forming implants for controlled release of Ivermectin a BCS Class II drug: solvent selection based on physico-chemical characterization

In situ forming implants (ISI) prepared from biodegradable polymers such as poly(d,l-lactide) (PLA) and biocompatible solvents can be used to obtain sustained drug release after parenteral administration. The aim of this work was to study the effect of several biocompatible solvents with different physico-chemical properties on the release of ivermectin (IVM), an antiparasitic BCS II drug, from in situ forming PLA-based implants. The solvents evaluated were N-methyl-2-pyrrolidone (NMP), 2-pyrrolidone (2P), triacetine (TA) and benzyl benzoate (BB). Hansen’s solubility parameters of solvents were used to explain polymer/solvent interactions leading to different rheological behaviours. The stability of the polymer and drug in the solvents were also evaluated by size exclusion and high performance liquid chromatography, respectively. The two major factors determining the rate of IVM release from ISI were miscibility of the solvent with water and the viscosity of the polymer solutions. In general, the release rate increased with increasing water miscibility of the solvent and decreasing viscosity in the following order NMP>2P>TA>BB. Scanning electron microscopy revealed a relationship between the rate of IVM release and the surface porosity of the implants, release being higher as implant porosity increased. Finally, drug and polymer stability in the solvents followed the same trends, increasing when polymer-solvent affinities and water content in solvents decreased. IVM degradation was accelerated by the acid environment generated by the degradation of the polymer but the drug did not affect PLA stability.

Time lasting S-nitrosoglutathione polymeric nanoparticles delay cellular protein S-nitrosation.

Physiological S-nitrosothiols (RSNO), such as S-nitrosoglutathione (GSNO), can be used as nitric oxide (NO) donor for the treatment of vascular diseases. However, despite a half-life measured in hours, the stability of RSNO, limited by enzymatic and non-enzymatic degradations, is too low for clinical application. So, to provide a long-lasting effect and to deliver appropriate NO concentrations to target tissues, RSNO have to be protected. RSNO encapsulation is an interesting response to overcome degradation and provide protection. However, RSNO such as GSNO raise difficulties for encapsulation due to its hydrophilic nature and the instability of the S-NO bound during the formulation process. To our knowledge, the present study is the first description of the direct encapsulation of GSNO within polymeric nanoparticles (NP). The GSNO-loaded NP (GSNO-NP) formulated by a double emulsion process, presented a mean diameter of 289 ± 7 nm. They were positively charged (+40 mV) due to the methacrylic acid and ethylacrylate polymer (Eudragit® RL) used and encapsulated GSNO with a satisfactory efficiency (i.e. 54% or 40 mM GSNO loaded in the NP). In phosphate buffer (37 °C; pH 7.4), GSNO-NP released 100% of encapsulated GSNO within 3h and remained stable still 6h. However, in contact with smooth muscle cells, maximum protein nitrosation (a marker of NO bioavailability) was delayed from 1h for free GSNO to 18h for GSNO-NP. Therefore, protection and sustained release of NO were achieved by the association of a NO donor with a drug delivery system (such as polymeric NP), providing opportunities for vascular diseases treatment.

Polymer nanocomposites enhance S-nitrosoglutathione intestinal absorption and promote the formation of releasable nitric oxide stores in rat aorta.

Alginate/chitosan nanocomposite particles (GSNO-acNCPs), i.e. S-nitrosoglutathione (GSNO) loaded polymeric nanoparticles incorporated into an alginate and chitosan matrix, were developed to increase the effective GSNO loading capacity, a nitric oxide (NO) donor, and to sustain its release from the intestine following oral administration. Compared with free GSNO and GSNO loaded nanoparticles, GSNO-acNCPs promoted 2.7-fold GSNO permeation through a model of intestinal barrier (Caco-2 cells). After oral administration to Wistar rats, GSNO-acNCPs promoted NO storage into the aorta during at least 17h, as highlighted by (i) a long-lasting hyporeactivity to phenylephrine (decrease in maximum vasoconstrictive effect of aortic rings) and (ii) N-acetylcysteine (a thiol which can displace NO from tissues)-induced vasodilation of aorxxtic rings preconstricted with phenylephrine. In conclusion, GSNO-acNCPs enhance GSNO intestinal absorption and promote the formation of releasable NO stores into the rat aorta. GSNO-acNCPs are promising carriers for chronic oral application devoted to the treatment of cardiovascular diseases.

Are in situ formulations the keys for the therapeutic future of S-nitrosothiols?

S-nitrosoglutathione (GSNO) and S-nitroso-N-acetylpenicillamine (SNAP) were formulated into in situ forming implants (ISI) and microparticles (ISM) using PLGA and either N-methyl-2-pyrrolidone (NMP) or triacetin. Physicochemical characterization was carried out, including the study of matrix structure and degradation. A strong correlation between drug hydrophobicity and the in vitro release profiles was observed: whatever the formulation, GSNO and SNAP were completely released after ca. 1 day and 1 week, respectively. Then, selected formulations (i.e., SNAP-loaded NMP formulations) demonstrated the ability to sustain the vasodilation effect of SNAP, as shown by monitoring the arterial pressure (telemetry) of Wistar rats after subcutaneous injection. Both ISI and ISM injections resulted in a 3-fold extended decrease in pulse arterial pressure compared with the unloaded drug, without significant decrease in the mean arterial pressure. Hence, the results emphasize the suitability of these formulations as drug delivery systems for S-nitrosothiols, widening their therapeutic potential.

In Situ Microparticles Loaded with S-Nitrosoglutathione Protect from Stroke

Treatment of stroke, especially during the first hours or days, is still lacking. S-nitrosoglutathione (GSNO), a cerebroprotective agent with short life time, may help if administered early with a sustain delivery while avoiding intensive reduction in blood pressure. We developed in situ forming implants (biocompatible biodegradable copolymer) and microparticles (same polymer and solvent emulsified with an external oily phase) of GSNO to lengthen its effects and allow cerebroprotection after a single subcutaneous administration to Wistar rats. Arterial pressure was recorded for 3 days (telemetry, n = 14), whole-blood platelet aggregation up to 13 days (aggregometry, n = 58), and neurological score, cerebral infarct size and edema volume for 2 days after obstruction of the middle cerebral artery by autologous blood clots (n = 30). GSNO-loaded formulations (30 mg/kg) induced a slighter and longer hypotension (-10 vs. -56 ± 6 mmHg mean arterial pressure, 18 h vs. 40 min) than free GSNO at the same dose. The change in pulse pressure (-50%) lasted even up to 42 h for microparticles. GSNO-loaded formulations (30 mg/kg) prevented the transient 24 h hyper-aggregability observed with free GSNO and 7.5 mg/kg-loaded formulations. When injected 2 h after stroke, GSNO-loaded microparticles (30 mg/kg) reduced neurological score at 24 (-62%) and 48 h (-75%) vs. empty microparticles and free GSNO 7.5 mg/kg and, compared to free GSNO, divided infarct size by 10 and edema volume by 8 at 48 h. Corresponding implants reduced infarct size and edema volume by 2.5 to 3 times. The longer (at least 2 days) but slight effects on arterial pressures show sustained delivery of GSNO-loaded formulations (30 mg/kg), which prevent transient platelet hyper-responsiveness and afford cerebroprotection against the consequences of stroke. In conclusion, in situ GSNO-loaded formulations are promising candidates for the treatment of stroke.

Polymer nanocomposite particles of S-nitrosoglutathione: A suitable formulation for protection and sustained oral delivery.

S-nitrosoglutathione (GSNO) is a nitric oxide (NO) donor with therapeutic potential for cardiovascular disease treatment. Chronic oral treatment with GSNO is limited by high drug sensitivity to the environment and limited oral bioavailability, requiring the development of delivery systems able to sustain NO release. The present work describes new platforms based on polymer nanocomposite particles for the delivery of GSNO. Five types of optimized nanocomposite particles have been developed (three based on chitosan, two based on alginate sodium). Those nanocomposite particles encapsulate GSNO with high efficiency from 64% to 70% and an average size of 13 to 61 μm compatible with oral delivery. Sustained release of GSNO in vitro was achieved. Indeed, chitosan nanocomposites discharged their payload within 24h; whereas alginate nanocomposites released GSNO more slowly (10% of GSNO was still remaining in the dosage form after 24h). Their cytocompatibility toward intestinal Caco-2 cells (MTT assay) was acceptable (IC50: 6.07 ± 0.07-9.46 ± 0.08 mg/mL), demonstrating their suitability as oral delivery systems for GSNO. These delivery systems presented efficient GSNO loading and sustained release as well as cytocompatibility, showing their promise as a means of improving the oral bioavailability of GSNO and as a potential new treatment.

Self-aggregation of cationically modified poly( ε -caprolactone) 2 - co -poly(ethylene glycol) copolymers: Effect of cationic grafting ligand and poly( ε -caprolactone) chain length

Cationic copolymers have been attractive to investigate due to their potential to complexation with anionic drugs and expected to use in the pharmaceutical application. In this study, the modified poly(ε-caprolactone)2-co-poly(ethylene glycol) copolymers (P(CL)2-PEG) were successfully synthesized by click reaction. The amount of small molecular cationic ligand, propargyltrimethyl ammonium iodide, was varied and grafted onto various mole ratios of P(CL) to PEG. The effects of P(CL) chain length and amount of the grafting cationic ligand on physicochemical properties of polymers and particles were studied. The number-average molecular weights of the copolymers grafted with cationic ligand were found ranging between 10,000 and 23,000g/mol as investigated by NMR. From DSC study, the results showed that the grafting ligand affected thermal behaviors of the copolymers by increasing the glass transition temperature and decreasing the melting temperature of the copolymers. Furthermore, these cationic copolymers could self-aggregate with their critical aggregation concentration depending on mole ratios of hydrophilic to hydrophobic portions. The particles containing higher amounts of the cationic ligand tended to aggregate in both acidic and basic pH environment and at high salt concentration. Additionally, particle size, size distribution (PdI), and morphology of self-assembling particles varied depending on P(CL) chain length and the amount of the grafting cationic ligand. The synthesized cationic copolymer showed a capability to encapsulate a high negatively charged drug, enoxaparin, with an encapsulation efficiency of 87%. After drug incorporation, the particles substantially changed in size, shape, PdI, and zeta potential to become more suitable for drug delivery. These cationic copolymers with flexible properties will be the candidate for further development as carriers for the delivery of negatively charged drugs.