Philippe Martimort

Design and development of the Sentinel-2 Multi Spectral Instrument and satellite system

2A and Sentinel-2B satellites currently under development will ensure systematic global acquisition of all land and coastal waters in the visible and short-wave infrared spectral domain with a 5 day revisit time at the equator. The Multi Spectral Instrument is a push-broom imager providing imagery in 13 spectral channels with spatial resolutions ranging from 10 m to 60 m and a swath width of 290 Km, larger than SPOT and Landsat. The instrument features a full field of view calibration device, a silicon carbide Three Mirror Anastigmat telescope with mirror dimensions up to 600 mm, specific filter stripe assemblies, newly developed Si-CMOS and HgCDTe detectors and a low noise wavelet compression video electronics. The 1.4 Tbits/s raw image date rate is reduced down to 490 Mbits/s at the output of the instrument to cope with the overall system transmission capability. The Sentinel-2 program has entered in the CD phase in 2009. Launch of Sentinel-2A satellite is scheduled for 2013.

SENTINEL-2 image quality and level 1 processing

In the framework of the Global Monitoring for Environment and Security (GMES) programme, the European Space Agency (ESA) in partnership with the European Commission (EC) is developing the SENTINEL-2 optical imaging mission devoted to the operational monitoring of land and coastal areas. The Sentinel-2 mission is based on a twin satellites configuration deployed in polar sun-synchronous orbit and is designed to offer a unique combination of systematic global coverage with a wide field of view (290km), a high revisit (5 days at equator with two satellites), a high spatial resolution (10m, 20m and 60 m) and multi-spectral imagery (13 bands in the visible and the short wave infrared spectrum). SENTINEL-2 will ensure data continuity of SPOT and LANDSAT multispectral sensors while accounting for future service evolution. This paper presents the main geometric and radiometric image quality requirements for the mission. The strong multi-spectral and multi-temporal registration requirements constrain the stability of the platform and the ground processing which will automatically refine the geometric physical model through correlation technics. The geolocation of the images will take benefits from a worldwide reference data set made of SENTINEL-2 data strips geolocated through a global space-triangulation. These processing are detailed through the description of the level 1C production which will provide users with ortho-images of Top of Atmosphere reflectances. The huge amount of data (1.4 Tbits per orbit) is also a challenge for the ground processing which will produce at level 1C all the acquired data. Finally we discuss the different geometric (line of sight, focal plane cartography, ...) and radiometric (relative and absolute camera sensitivity) in-flight calibration methods that will take advantage of the on-board sun diffuser and ground targets to answer the severe mission requirements.

VNIR focal plane results from the multispectral instrument of the Sentinel2 mission

The development and testing of the MSI PFM for the first Sentinel-2 satellite is now completely achieved, in particular tests and characterization of the VNIR FPA and of the whole instrument. This paper provides main results obtained for the 12 VNIR detection chains of the Sentinel-2 Multi-Spectral Instrument and highlights some of the most outstanding characteristics and performances achieved.

The multispectral instrument of the Sentinel2 EM program results

The MSI EM campaign has been conducted before releasing the flight model integration and test. This paper presents the MSI EM configuration and the various tests results. Experience gained through this extensive test program allowed securing the MSI PFM integration and test activities.

SENTINEL-2: geometric calibration during commissioning phase

Sentinel-2 is a multispectral, high-resolution, optical imaging mission, developed by the European Space Agency (ESA) in the frame of the Copernicus program of the European Commission. In cooperation with ESA, the Centre National d’Etudes Spatiales (CNES) is responsible for the image quality of the project, and will ensure the CAL/VAL commissioning phase. Sentinel-2 mission is devoted the operational monitoring of land and coastal areas, and will provide a continuity of SPOT- and Landsat-type data. Sentinel-2 will also deliver information for emergency services. Launched in 2015 and 2016, there will be a constellation of 2 satellites on a polar sun-synchronous orbit, imaging systematically terrestrial surfaces with a revisit time of 5 days, in 13 spectral bands in visible and shortwave infra-red. Therefore, multi-temporal series of images, taken under the same viewing conditions, will be available. This paper first briefly presents Sentinel-2 system, the design, the level-1 products, and the main geometric image quality requirements: geolocation with and without ground control points, multi-temporal and multi-spectral registration. Then, it presents the methods foreseen during commissioning: the viewing frames orientation, the focal plane mapping, the global reference image generation. Finally, it presents the Sentinel-2 image simulation tool, used to provide data for the validation of these developments.

Overview of Sentinel-2

GMES is a joint initiative of the European Commission (EC) and the European Space Agency (ESA), designed to establish a European capacity for the provision and use of operational monitoring information for environment and security applications. ESA’s role in GMES is to provide the definition and the development of the space- and ground-related system elements. GMES Sentinel-2 mission provides continuity to services relying on multi-spectral highresolution optical observations over global terrestrial surfaces. The key mission objectives for Sentinel-2 are: (1) to provide systematic global acquisitions of high-resolution multi-spectral imagery with a high revisit frequency, (2) to provide enhanced continuity of multi-spectral imagery provided by the SPOT series of satellites, and (3) to provide observations for the next generation of operational products such as landcover maps, land change detection maps, and geophysical variables. Consequently, Sentinel-2 will directly contribute to the Land Monitoring, Emergency Response, and Security services. The corresponding user requirements have driven the design towards a dependable multi-spectral Earthobservation system featuring the MSI with 13 spectral bands spanning from the visible and the near infrared to the short wave infrared. The spatial resolution varies from 10 m to 60 m depending on the spectral band with a 290 km field of view. This unique combination of high spatial resolution, wide field of view and large spectral coverage will represent a major step forward compared to current multi-spectral missions. The mission foresees a series of satellites, each having a 7.25-year lifetime (extendable to 12 years) over a 20-year period starting with the launch of Sentinel-2A foreseen by mid-2014. During full operations two identical satellites will be maintained in the same sun synchronous orbit with a phase delay of 180° providing a revisit time of five days at the equator.