Phillip W. Snyder

Mechanism of the hydrophobic effect in the biomolecular recognition of arylsulfonamides by carbonic anhydrase

The hydrophobic effect—a rationalization of the insolubility of nonpolar molecules in water—is centrally important to biomolecular recognition. Despite extensive research devoted to the hydrophobic effect, its molecular mechanisms remain controversial, and there are still no reliably predictive models for its role in protein–ligand binding. Here we describe a particularly well-defined system of protein and ligands—carbonic anhydrase and a series of structurally homologous heterocyclic aromatic sulfonamides—that we use to characterize hydrophobic interactions thermodynamically and structurally. In binding to this structurally rigid protein, a set of ligands (also defined to be structurally rigid) shows the expected gain in binding free energy as hydrophobic surface area is added. Isothermal titration calorimetry demonstrates that enthalpy determines these increases in binding affinity, and that changes in the heat capacity of binding are negative. X-ray crystallography and molecular dynamics simulations are compatible with the proposal that the differences in binding between the homologous ligands stem from changes in the number and organization of water molecules localized in the active site in the bound complexes, rather than (or perhaps in addition to) release of structured water from the apposed hydrophobic surfaces. These results support the hypothesis that structured water molecules—including both the molecules of water displaced by the ligands and those reorganized upon ligand binding—determine the thermodynamics of binding of these ligands at the active site of the protein. Hydrophobic effects in various contexts have different structural and thermodynamic origins, although all may be manifestations of the differences in characteristics of bulk water and water close to hydrophobic surfaces.

Using Explosions to Power a Soft Robot

grasping and walking. Despite their advantages(simplicity of fabrication, actuation, and control; low cost;light weight), pneu-nets have the disadvantage that actuationusing them is slow, in part because the viscosity of air limitsthe rate at which the gas can be delivered through tubes to filland expand the microchannels. Herein, we demonstrate therapid actuation of pneu-nets using a chemical reaction (thecombustion of methane) to generate explosive bursts ofpressure.Althoughthecombustionofhydrocarbonsisubiquitousinthe actuation of hard systems (e.g., in the metal cylinder ofa diesel or spark-ignited engine

Dependence of Avidity on Linker Length for a Bivalent Ligand–Bivalent Receptor Model System

This paper describes a synthetic dimer of carbonic anhydrase, and a series of bivalent sulfonamide ligands with different lengths (25 to 69 Å between the ends of the fully extended ligands), as a model system to use in examining the binding of bivalent antibodies to antigens. Assays based on analytical ultracentrifugation and fluorescence binding indicate that this system forms cyclic, noncovalent complexes with a stoichiometry of one bivalent ligand to one dimer. This dimer binds the series of bivalent ligands with low picomolar avidities (K(d)(avidity) = 3-40 pM). A structurally analogous monovalent ligand binds to one active site of the dimer with K(d)(mono) = 16 nM. The bivalent association is thus significantly stronger (K(d)(mono)/K(d)(avidity) ranging from ~500 to 5000 unitless) than the monovalent association. We infer from these results, and by comparison of these results to previous studies, that bivalency in antibodies can lead to associations much tighter than monovalent associations (although the observed bivalent association is much weaker than predicted from the simplest level of theory: predicted K(d)(avidity) of ~0.002 pM and K(d)(mono)/K(d)(avidity) ~ 8 × 10(6) unitless).

Fluoroalkyl and Alkyl Chains Have Similar Hydrophobicities in Binding to the “Hydrophobic Wall” of Carbonic Anhydrase

The hydrophobic effect, the free-energetically favorable association of nonpolar solutes in water, makes a dominant contribution to binding of many systems of ligands and proteins. The objective of this study was to examine the hydrophobic effect in biomolecular recognition using two chemically different but structurally similar hydrophobic groups, aliphatic hydrocarbons and aliphatic fluorocarbons, and to determine whether the hydrophobicity of the two groups could be distinguished by thermodynamic and biostructural analysis. This paper uses isothermal titration calorimetry (ITC) to examine the thermodynamics of binding of benzenesulfonamides substituted in the para position with alkyl and fluoroalkyl chains (H(2)NSO(2)C(6)H(4)-CONHCH(2)(CX(2))(n)CX(3), n = 0-4, X = H, F) to human carbonic anhydrase II (HCA II). Both alkyl and fluoroalkyl substituents contribute favorably to the enthalpy and the entropy of binding; these contributions increase as the length of chain of the hydrophobic substituent increases. Crystallography of the protein-ligand complexes indicates that the benzenesulfonamide groups of all ligands examined bind with similar geometry, that the tail groups associate with the hydrophobic wall of HCA II (which is made up of the side chains of residues Phe131, Val135, Pro202, and Leu204), and that the structure of the protein is indistinguishable for all but one of the complexes (the longest member of the fluoroalkyl series). Analysis of the thermodynamics of binding as a function of structure is compatible with the hypothesis that hydrophobic binding of both alkyl and fluoroalkyl chains to hydrophobic surface of carbonic anhydrase is due primarily to the release of nonoptimally hydrogen-bonded water molecules that hydrate the binding cavity (including the hydrophobic wall) of HCA II and to the release of water molecules that surround the hydrophobic chain of the ligands. This study defines the balance of enthalpic and entropic contributions to the hydrophobic effect in this representative system of protein and ligand: hydrophobic interactions, here, seem to comprise approximately equal contributions from enthalpy (plausibly from strengthening networks of hydrogen bonds among molecules of water) and entropy (from release of water from configurationally restricted positions).

Using shape for self-assembly

A 1980 poem by Alan Mackay outlines his aspiration ‘to see what all have seen but think what none have thought’: a daunting task, which he accomplished not once, but several times. A ‘truly myriadminded, manysided man—a veritable triacontahedron’ in the words of his colleagues and friends, Alan Mackay pursued a lifelong interest in the problems of morphogenesis and form, a comprehension of which necessitated him crisscrossing the borders of the inanimate and animate world of soft and hard materials, through the integration of concepts and methods of chemistry, physics, mathematics and biology. In other words, he realized in his time a genuinely interdisciplinary approach to complex problems that still to this day remains beyond much of the academic community. Being invited to contribute a paper on the theme ‘beyond crystals’, we naturally wondered how Alan Mackay would think about the world of nanoscale self-assembly where so much depends on shape and form.

Using covalent dimers of human carbonic anhydrase II to model bivalency in immunoglobulins.

This paper describes the development of a new bivalent system comprising synthetic dimers of carbonic anhydrase linked chemically through thiol groups of cysteine residues introduced by site-directed mutagenesis. These compounds serve as models with which to study the interaction of bivalent proteins with ligands presented at the surface of mixed self-assembled monolayers (SAMs). Monovalent carbonic anhydrase (CA) binds to benzenesulfonamide ligands presented on the surface of the SAM with K(d)(surf) = 89 nM. The synthetic bivalent proteins--inspired by the structure of immunoglobulins--bind bivalently to the sulfonamide-functionalized SAMs with low nanomolar avidities (K(d)(avidity,surf) = 1-3 nM); this difference represents a ~50-fold enhancement of bivalent over monovalent association. The paper describes dimers of CA having (i) different lengths of the covalent linker that joined the two proteins and (ii) different points of attachment of the linker to the protein (either near the active site (C133) or distal to the active site (C185)). Comparison of the thermodynamics of their interactions with SAMs presenting arylsulfonamide groups demonstrated that varying the length of the linker between the molecules of CA had virtually no effect on the rate of association, or on the avidity of these dimers with ligand-presenting surfaces. Varying the point of attachment of the linker between monomeric CAs also had almost no effect on the avidity of the dimers, although changing the point of attachment affected the rates of binding and unbinding. These observations indicate that the avidities of these bivalent proteins, and by inference the avidities of structurally similar bivalent proteins such as IgG, are unexpectedly insensitive to the structure of the linker connecting them.

A stochastic, cantilever approach to the evaluation of solution phase thermodynamic quantities

A cantilever device based on competitive binding of an immobilized receptor to immobilized and soluble ligand and capable of measuring solution-phase thermodynamic quantities is described. Through multiple binary queries, the device stochastically measures the probability of the formation of a bound complex between immobilized protein and immobilized ligand as a function of soluble ligand concentration. The resulting binding isotherm is described by a binding polynomial consisting of the activities of soluble and immobilized ligand and binding constants for the association of immobilized protein with free and immobilized ligand. Evaluation of the polynomial reveals an association constant for the formation of a complex between immobilized ligand and immobilized protein close to that for the formation of complex between soluble protein and soluble ligand. The methodology lays the foundation for construction of practical portable sensing devices.

Folding of electrostatically charged beads-on-a-string as an experimental realization of a theoretical model in polymer science

The “beads-on-a-string” model for folding of polymers is a cornerstone of theoretical polymer science. This communication describes a physical model of beads-on-a-string, based on the folding of flexible strings of electrostatically charged beads in two dimensions. The system comprises millimeter-scale Teflon and Nylon-6,6 (spherical or cylindrical) beads (≈ 6 mm in diameter) separated by smaller (≈3 mm) poly(methyl methacrylate) (PMMA) spherical beads, threaded on a flexible string. The smaller, uncharged beads define the distances between the larger beads, and control the flexibility of the string. During agitation of the sequence of beads on a planar, horizontal paper surface, tribocharging generates opposite electrostatic charges on the larger Nylon and Teflon beads, but leaves the smaller PMMA beads essentially uncharged; the resulting electrostatic interactions cause the string to fold. Examination and comparison of two models—one physical and one theoretical—may offer a new approach to understanding folding, collapse, and molecular recognition at an abstract level, with particular opportunity to explore the influence of the flexibility of the string and the shape of the beads on the pattern and rate of folding. The physical system is, thus, an analog computer, simulating the theoretical beads-on-a-string model in two dimensions; this system makes it possible to test hypotheses connecting “sequence” to “folding”, rapidly and conveniently, while exploring nonlinearities and other complexities omitted from the theoretical model.

Selective Precipitation and Purification of Monovalent Proteins Using Oligovalent Ligands and Ammonium Sulfate

This paper describes a method for the selective precipitation and purification of a monovalent protein (carbonic anhydrase is used as a demonstration) from cellular lysate using ammonium sulfate and oligovalent ligands. The oligovalent ligands induce the formation of protein-ligand aggregates, and at an appropriate concentration of dissolved ammonium sulfate, these complexes precipitate. The purification involves three steps: (i) the removal of high-molecular-weight impurities through the addition of ammonium sulfate to the crude cell lysate; (ii) the introduction of an oligovalent ligand and the selective precipitation of the target protein-ligand aggregates from solution; and (iii) the removal of the oligovalent ligand from the precipitate by dialysis to release the target protein. The increase of mass and volume of the proteins upon aggregate formation reduces their solubility, and results in the selective precipitation of these aggregates. We recovered human carbonic anhydrase, from crude cellular lysate, in 82% yield and 95% purity with a trivalent benzene sulfonamide ligand. This method provides a chromatography-free strategy of purifying monovalent proteins--for which appropriate oligovalent ligands can be synthesized--and combines the selectivity of affinity-based purification with the convenience of salt-induced precipitation.

Analog modeling of Worm-Like Chain molecules using macroscopic beads-on-a-string

This paper describes an empirical model of polymer dynamics, based on the agitation of millimeter-sized polymeric beads. Although the interactions between the particles in the macroscopic model and those between the monomers of molecular-scale polymers are fundamentally different, both systems follow the Worm-Like Chain theory.