Pier Paolo Poli

Alveolar ridge reconstruction with titanium meshes: A systematic review of the literature

Alveolar bone regeneration by means of titanium meshes is a widespread procedure, however to date, only few relevant studies were reported in literature concerning this technique. Consequently, the aim of the present systematic review was to analyze the reliability of the titanium mesh as a barrier, in conjunction with horizontal and vertical ridge reconstruction for implant placement purposes. A total of 17 articles complying with the inclusion and exclusion criteria were reviewed. Three outcome variables were defined: a) horizontal and vertical bone regeneration obtained, b) complication rate, defined as the percentage of membrane exposures and c) evaluation of implant survival, success and failure rate.In regards to the vertical regeneration the mean was 4.91 mm (range: 2.56 - 8.6), while a mean of 4.36 mm (range: 3.75 - 5.65) was calculated for horizontal reconstruction. Considering the exposure rate, a mean of 16.1% was found, nevertheless, implant placement were placed in almost all of the sites. A mean success rate of 89,9%, a mean survival rate of 100% and a failure rate of 0% emerged from the data evaluation. A meta-analysis could not be performed due to the heterogeneity of the data, however the final results were comparable with those reported in case of bone regeneration obtained through other types of non-resorbable membranes. An advantage in favour of the titanium mesh was found in terms of bone loss after exposure, as implant placement was not jeopardized in almost all of the cases. It could be deduced that titanium meshes represented a reliable solution for alveolar ridge reconstruction. The clinical studies currently available in literature have shown the predictability of this technique in both lateral and vertical bone regeneration. Key words:Alveolar ridge reconstruction, bone atrophy, bone regeneration, dental implants, titanium mesh.

Accuracy of computer-aided template-guided oral implant placement: a prospective clinical study

Purpose The aim of the present study was to evaluate the in vivo accuracy of flapless, computer-aided implant placement by comparing the three-dimensional (3D) position of planned and placed implants through an analysis of linear and angular deviations. Methods Implant position was virtually planned using 3D planning software based on the functional and aesthetic requirements of the final restorations. Computer-aided design/computer-assisted manufacture technology was used to transfer the virtual plan to the surgical environment. The 3D position of the planned and placed implants, in terms of the linear deviations of the implant head and apex and the angular deviations of the implant axis, was compared by overlapping the pre- and postoperative computed tomography scans using dedicated software. Results The comparison of 14 implants showed a mean linear deviation of the implant head of 0.56 mm (standard deviation [SD], 0.23), a mean linear deviation of the implant apex of 0.64 mm (SD, 0.29), and a mean angular deviation of the long axis of 2.42° (SD, 1.02). Conclusions In the present study, computer-aided flapless implant surgery seemed to provide several advantages to the clinicians as compared to the standard procedure; however, linear and angular deviations are to be expected. Therefore, accurate presurgical planning taking into account anatomical limitations and prosthetic demands is mandatory to ensure a predictable treatment, without incurring possible intra- and postoperative complications. Graphical Abstract

Alveolar Ridge Augmentation with Titanium Mesh. A Retrospective Clinical Study

An adequate amount of bone all around the implant surface is essential in order to obtain long-term success of implant restoration. Several techniques have been described to augment alveolar bone volume in critical clinical situations, including guided bone regeneration, based on the use of barrier membranes to prevent ingrowth of the epithelial and gingival connective tissue cells. To achieve this goal, the use of barriers made of titanium micromesh has been advocated. A total of 13 patients were selected for alveolar ridge reconstruction treatment prior to implant placement. Each patient underwent a tridimensional bone augmentation by means of a Ti-mesh filled with intraoral autogenous bone mixed with deproteinized anorganic bovine bone in a 1:1 ratio. Implants were placed after a healing period of 6 months. Panoramic x-rays were performed after each surgical procedure and during the follow-up recalls. Software was used to measure the mesial and the distal peri-implant bone loss around each implant. The mean peri-implant bone loss was 1.743 mm on the mesial side and 1.913 mm on the distal side, from the top of the implant head to the first visible bone-implant contact, at a mean follow-up of 88 months. The use of Ti-mesh allows the regeneration of sufficient bone volume for ideal implant placement. The clinical advantages related to this technique include the possibility of correcting severe vertical atrophies associated with considerable reductions in width and the lack of major complications if soft-tissue dehiscence and mesh exposures do occur.

Long-term survival rate of implants placed in conjunction with 246 sinus floor elevation procedures: Results of a 15-year retrospective study

OBJECTIVES The aim of the present long-term study was to retrospectively evaluate the survival rate of implants placed in regenerated maxillary sinuses and to assess the influence of hypothetical predictors of implant failure. METHODS A database including 218 patients who received dental implants after sinus lift procedures was analyzed. The following variables were systematically included and evaluated: type of graft material used, number of surgeries performed, and use of membranes to cover the lateral antrostomy and/or to repair accidental Schneiderian membrane perforations. The Kaplan-Meier estimator was used for comparisons among the groups. RESULTS A total of 589 dental implants were positioned in 246 grafted sinuses and were in function for 3-186 months. The Kaplan-Meier cumulative survival rate was 98.3% after 15.5 years of follow-up. All implant losses occurred within 52 months (4.3 years) after augmentation. According to the log-rank test, no statistically significant difference was shown between each patient/implant variable (p>0.05). CONCLUSIONS Despite the limitations inherent in this type of study, no statistically significant differences between the groups could be found. Intraoperative Schneiderian membrane perforations did not affect the outcome of the implants positioned. CLINICAL SIGNIFICANCE The present long-term study is intended as a reference for clinicians approaching sinus floor elevation surgery in order to provide them with relevant operative findings. Since all the drawbacks occurred within the first 5 years, medium-term follow-up studies could be suitable for further retrospective evaluations.

Histomorphometrical evaluation of fresh frozen bone allografts for alveolar bone reconstruction: preliminary cases comparing femoral head with iliac crest grafts.

PURPOSE In the past few years, the use of fresh frozen bone (FFB) grafts has significantly increased. The aim of this study was to evaluate the reconstruction of alveolar bone using femoral head and iliac crest FFB grafts. MATERIALS AND METHODS The study included 10 patients who need endosseous implant insertion in severe atrophic maxillae. The patients were treated with FFB grafts collected from the femoral head or iliac crest. Bone regeneration was evaluated 6 months after surgery by macroscopic and microscopic analyses. RESULTS Our results showed good regenerative capacity, both with the FFB from the femoral head and iliac crest. In particular, similar percentages of new-bone formation and graft residual were observed, whereas differences between the percentage of total bone (higher for the iliac crest) and the percentage of non-mineralized tissue (higher for the femoral head) were present. A significantly higher percentage of CD34-positive vessels in the FFB allograft from the femoral head than in the iliac crest were observed. CONCLUSIONS These findings suggest that FFB allografts could represent a reliable option in oral and maxillofacial surgery. Nevertheless, differences between the use of femoral head or iliac crest bone allografts linked with their different structures should be considered for a more effective surgery.

Risk indicators related to peri-implant disease: an observational retrospective cohort study

Purpose The aim of the present study was to retrospectively investigate the influence of potential risk indicators on the development of peri-implant disease. Methods Overall, 103 patients referred for implant treatment from 2000 to 2012 were randomly enrolled. The study sample consisted of 421 conventional-length (>6 mm) non-turned titanium implants that were evaluated clinically and radiographically according to pre-established clinical and patient-related parameters by a single investigator. A non-parametric Mann-Whitney U test or Kruskal-Wallis rank test and a logistic regression model were used for the statistical analysis of the recorded data at the implant level. Results The diagnosis of peri-implant mucositis and peri-implantitis was made for 173 (41.1%) and 19 (4.5%) implants, respectively. Age (≥65 years), patient adherence (professional hygiene recalls <2/year) and the presence of plaque were associated with higher peri-implant probing-depth values and bleeding-on-probing scores. The logistic regression analysis indicated that age (P=0.001), patient adherence (P=0.03), the absence of keratinized tissue (P=0.03), implants placed in pristine bone (P=0.04), and the presence of peri-implant soft-tissue recession (P=0.000) were strongly associated with the event of peri-implantitis. Conclusions Within the limitations of this study, patients aged ≥65 years and non-adherent subjects were more prone to develop peri-implant disease. Therefore, early diagnosis and a systematic maintenance-care program are essential for maintaining peri-implant tissue health, especially in older patients.

Long-Term Retrospective Evaluation of Dental Implants Placed in Resorbed Jaws Reconstructed With Appositional Fresh-Frozen Bone Allografts.

Introduction:The aim of this study was to evaluate the outcome of fresh-frozen bone allografts in preprosthetic surgery for implant placement purposes. Materials and Methods:The cohort comprised 45 patients treated with fresh-frozen bone block grafts and dental implants. Clinical and radiological evaluations were performed to evaluate the survival rate. The data were statistically analyzed with the Kaplan-Meier estimator to assess the influence of possible predictors of implant failure on survival. Results:Overall, 262 implants were retrospectively analyzed. The survival rate was 90.84% over a mean follow-up of 50 months. Comparing the donor site and the position of the implants, no statistically significant differences could be detected (P = 0.7194 and P = 0.2901, respectively), whereas sex resulted in a marginally statistically significant difference (P = 0.0581). When considering age categorized on the median value (⩽55/>55 years), age resulted in a statistically significant difference (P = 0.0340), with higher failures found in older people. Conclusion:Implant loss was strictly related to the lack of primary osseointegration. Female sex and old age were found to be risk factors, which could negatively influence implant survival.

Alveolar socket preservation with demineralised bovine bone mineral and a collagen matrix

Purpose The aim of the present study was to evaluate the healing of post-extraction sockets following alveolar ridge preservation clinically, radiologically, and histologically. Methods Overall, 7 extraction sockets in 7 patients were grafted with demineralised bovine bone mineral and covered with a porcine-derived non-crosslinked collagen matrix (CM). Soft tissue healing was clinically evaluated on the basis of a specific healing index. Horizontal and vertical ridge dimensional changes were assessed clinically and radiographically at baseline and 6 months after implant placement. For histological and histomorphometric analysis, bone biopsies were harvested from the augmented sites during implant surgery 6 months after the socket preservation procedure. Results Clinically, healing proceeded uneventfully in all the sockets. A trend towards reduced horizontal and vertical socket dimensions was observed from baseline to the final examination. The mean width and height of resorption were 1.21 mm (P=0.005) and 0.46 mm (P=0.004), respectively. Histologically, residual xenograft particles (31.97%±3.52%) were surrounded by either newly formed bone (16.02%±7.06%) or connective tissue (50.67%±8.42%) without fibrous encapsulation. The CM underwent a physiological substitution process in favour of well-vascularised collagen-rich connective tissue. Conclusions Socket preservation using demineralised bovine bone mineral in combination with CM provided stable dimensional changes of the alveolar ridge associated with good re-epithelialisation of the soft tissues during a 6-month healing period.

Adjunctive use of antimicrobial photodynamic therapy in the treatment of medication-related osteonecrosis of the jaws: A case report

Medication-related osteonecrosis of the jaws is a delayed healing condition commonly recognized as a serious adverse effect of antiresorptive therapy and is particularly associated with aminobisphosphonate treatment. In the present report, a 62-year-old osteoporotic female patient treated with intramuscular injections of clodronate for 3 years exhibited clinical signs of exposed necrotic bone and inflamed mucosa 4 months after tooth extractions in the mandibular interforaminal region. The treatment consisted of sequestrectomy, open-flap debridement, and adjunctive use of antimicrobial photodynamic therapy to decontaminate the affected hard and soft tissues. Successful results were obtained and maintained from both clinical and radiological aspects. No recurrence was observed up to 6 months of follow-up.

Virtually guided alveolar ridge reduction combined with computer-aided implant placement for a bimaxillary implant-supported rehabilitation: A clinical report

Insufficient crown height space, particularly in the interforaminal region of edentulous ridges with knife-edge morphology, may prevent successful prosthetic rehabilitation. Such conditions require osteoplasty, which might complicate computer-guided implant placement. This clinical report illustrates the treatment of a patient with complete edentulism rehabilitated with a mandibular implant-supported fixed dental prosthesis by using a virtually guided approach. Both alveolar ridge reduction and prosthetically driven implant insertions were computer-guided by surgical stents to increase accuracy and predictability. This approach enabled the immediate loading of the implants with an interim prosthesis before the delivery of a definitive screw-retained fixed prosthesis. At the 1-year follow-up visit, clinical and radiographic examination revealed a stable outcome.