Pierre-François Coheur

Atmospheric Chemistry Experiment (ACE): Mission overview

SCISAT-1, also known as the Atmospheric Chemistry Experiment (ACE), is a Canadian satellite mission for remote sensing of the Earths atmosphere. It was launched into low Earth circular orbit (altitude 650 km, inclination 74°) on 12 Aug. 2003. The primary ACE instrument is a high spectral resolution (0.02 cm-1) Fourier Transform Spectrometer (FTS) operating from 2.2 to 13.3 μm (750-4400 cm-1). The satellite also features a dual spectrophotometer known as MAESTRO with wavelength coverage of 285-1030 nm and spectral resolution of 1-2 nm. A pair of filtered CMOS detector arrays records images of the Sun at 0.525 and 1.02 μm. Working primarily in solar occultation, the satellite provides altitude profile information (typically 10-100 km) for temperature, pressure, and the volume mixing ratios for several dozen molecules of atmospheric interest, as well as atmospheric extinction profiles over the latitudes 85°N to 85°S. This paper presents a mission overview and some of the first scientific results. Copyright 2005 by the American Geophysical Union.

Hyperspectral Earth Observation from IASI: Five Years of Accomplishments

The Infrared Atmospheric Sounding Interferometer (IASI) forms the main infrared sounding component of the European Organisation for the Exploitation of Meteorological Satellitess (EUMETSATs) Meteorological Operation (MetOp)-A satellite (Klaes et al. 2007), which was launched in October 2006. This article presents the results of the first 4 yr of the operational IASI mission. The performance of the instrument is shown to be exceptional in terms of calibration and stability. The quality of the data has allowed the rapid use of the observations in operational numerical weather prediction (NWP) and the development of new products for atmospheric chemistry and climate studies, some of which were unexpected before launch. The assimilation of IASI observations in NWP models provides a significant forecast impact; in most cases the impact has been shown to be at least as large as for any previous instrument. In atmospheric chemistry, global distributions of gases, such as ozone and carbon monoxide, can be produ...

Towards a climate-dependent paradigm of ammonia emission and deposition

Existing descriptions of bi-directional ammonia (NH3) land–atmosphere exchange incorporate temperature and moisture controls, and are beginning to be used in regional chemical transport models. However, such models have typically applied simpler emission factors to upscale the main NH3 emission terms. While this approach has successfully simulated the main spatial patterns on local to global scales, it fails to address the environment- and climate-dependence of emissions. To handle these issues, we outline the basis for a new modelling paradigm where both NH3 emissions and deposition are calculated online according to diurnal, seasonal and spatial differences in meteorology. We show how measurements reveal a strong, but complex pattern of climatic dependence, which is increasingly being characterized using ground-based NH3 monitoring and satellite observations, while advances in process-based modelling are illustrated for agricultural and natural sources, including a global application for seabird colonies. A future architecture for NH3 emission–deposition modelling is proposed that integrates the spatio-temporal interactions, and provides the necessary foundation to assess the consequences of climate change. Based on available measurements, a first empirical estimate suggests that 5°C warming would increase emissions by 42 per cent (28–67%). Together with increased anthropogenic activity, global NH3 emissions may increase from 65 (45–85) Tg N in 2008 to reach 132 (89–179) Tg by 2100.

Retrieval and characterization of ozone vertical profiles from a thermal infrared nadir sounder

Received 27 February 2005; revised 15 September 2005; accepted 13 October 2005; published 17 December 2005. [1] This paper presents the first retrievals and validations of ozone vertical distributions from a set of high-resolution nadir thermal infrared measurements. These were obtained by the Interferometric Monitor for Greenhouse gases (IMG) instrument, which has operated on board the Japanese ADEOS platform between 1996 and 1997. The Optimal Estimation Method is used for the retrievals, along with a priori profile and covariance matrix built from model climatologies. We compare the retrieved IMG profiles with high-vertical-resolution ozone sonde measurements. Therefore we selected a set of IMG spectra collocated to within 3� of longitude and latitude with a representative distribution of ground-based stations. We demonstrate that thanks to the two to four independent pieces of vertical information contained in the spectroscopic measurements with a maximum sensitivity in the upper troposphere–middle stratosphere, the thermal infrared nadir sounders are able to capture most of the ozone spatial and temporal variations. In particular, the latitudinal variations of the stratospheric ozone maximum are well represented in the retrievals, as are the high ozone concentrations observed in the upper troposphere–lower stratosphere at northern midlatitudes during springtime. Ozone depletion events in the Arctic vortex are also well reproduced. The measurements provide an accurate view of the tropospheric ozone content, except when the latter is very low. A detailed error budget reveals that the major part of the error in the IMG retrieved ozone profile is due to the smoothing of the true profile by the averaging kernel matrix, with additional contributions associated with the measurement noise and the inaccurate knowledge of the temperature profile and of the Instrument Line Shape (ILS).

A correlation method for volcanic ash detection using hyperspectral infrared measurements

Remote satellite detection of airborne volcanic ash is important for mitigating hazards to aviation and for calculating plume altitudes. Infrared sounders are essential for detecting ash, as they can distinguishing aerosol type and can be used day and night. While broadband sensors are mainly used for this purpose, they have inherent limitations. Typically, water and ice can mask volcanic ash, while wind blown dust can yield false detection. High spectral resolution sounders should be able to overcome some of these limitations. However, existing detection methods are not easily applicable to hyperspectral sounders and there is therefore a pressing need for novel techniques. In response, we propose a sensitive and robust volcanic ash detection method for hyperspectral sounders based on correlation coefficients and demonstrate it on IASI observations. We show that the method differentiates ash from clouds and dust. Easy to implement, it could contribute to operational volcanic hazard mitigation.

Retrieving radius, concentration, optical depth, and mass of different types of aerosols from high-resolution infrared nadir spectra

We present a sophisticated radiative transfer code for modeling outgoing IR radiation from planetary atmospheres and, conversely, for retrieving atmospheric properties from high-resolution nadir-observed spectra. The forward model is built around a doubling-adding routine and calculates, in a spherical refractive geometry, the outgoing radiation emitted by the Earth and the atmosphere containing one layer of aerosol. The inverse model uses an optimal estimation approach and can simultaneously retrieve atmospheric trace gases, aerosol effective radius, and concentration. It is different from existing codes, as most forward codes dealing with multiple scattering assume a plane-parallel atmosphere, and as for the retrieval, it does not rely on precalculated spectra, the use of microwindows, or two-step retrievals. The simultaneous retrieval on a broad spectral range exploits the full potential of current state-of-the-art hyperspectral IR sounders, such as AIRS and IASI, and should be particularly useful in studying major pollution events. We present five example retrievals of IASI spectra observed in the range from 800 to 1200 cm(-1) above dust, volcanic ash, sulfuric acid, ice particles, and biomass burning aerosols.

A 3000 K laboratory emission spectrum of water

An emission spectrum of hot water with a temperature of about 3000 K is obtained using an oxy-acetylene torch. This spectrum contains a very large number of transitions. The spectrum, along with previous cooler laboratory emission spectra and an absorption spectrum recorded from a sunspot, is analyzed in the 500-2000 cm(-1) region. Use of a calculated variational linelist for water allows significant progress to be made on assigning transitions involving highly excited vibrational and rotational states. In particular emission from rotationally excited states up to J=42 and vibrational levels with up to eight quanta of bending motion are assigned.

Carbon monoxide distribution from the ACE-FTS solar occultation measurements

This paper presents a comprehensive analysis of the CO observations acquired during the first eight months (January to September 2004) of the ACE mission. We show that the ACE high-resolution Fourier transform spectrometer (ACE-FTS), which operates in the solar occultation geometry and covers a wide spectral interval in the infrared, provides useful measurements in both the CO 1-0 and 2-0 vibrational bands. Vertically-resolved CO concentration profiles are retrieved, extending from the mid-troposphere to the thermosphere (from about 5 to 110 km). We have analyzed the latitudinal variability of the measurements, from which various physical and chemical atmospheric processes are highlighted for further study.

A global inventory of stratospheric chlorine in 2004

Total chlorine (CITOT) in the stratosphere has been determined using the Atmospheric Chemistry Experiment Fourier Transform Spectrometer (ACE-FTS) measurements of HCl, ClONO2, CH3Cl, CCl4, CCl3F (CFC-11), CCl2F2 (CFC-12), CHClF2 (HCFC-22), CCl2FCClF2 (CFC-113), CH3CClF2 (HCFC-142b), COClF, and ClO supplemented by data from several other sources, including both measurements and models. Separate chlorine inventories were carried out in five latitude zones (60°-82°N, 30°-60°N, 30°S-30°N, 30°-60°S, and 60°-82°S), averaging the period of February 2004 to January 2005 inclusive, when possible, to deal with seasonal variations. The effect of diurnal variation was avoided by only using measurements taken at local sunset. Mean stratospheric ClTOT values of 3.65 ppbv were determined for both the northern and southern midlatitudes (with an estimated 1σ, accuracy of ±0.13 ppbv and a precision of ±.09 ppbv), accompanied by a slightly lower value in the tropics and slightly higher values at high latitudes. Stratospheric ClTOT profiles in all five latitude zones are nearly linear with a slight positive slope in ppbv /km. Both the observed slopes and pattern of latitudinal variation can be interpreted as evidence of the beginning of a decline in global stratospheric chlorine, which is qualitatively consistent with the mean stratospheric circulation pattern and time lag necessary for transport.

Satellite Monitoring of Volcanic Sulfur Dioxide Emissions for Early Warning of Volcanic Hazards

Satellite-based remote sensing measurements of volcanic sulfur dioxide (SO2) provide critical information for reducing volcanic hazards. This paper describes the use of SO2 measurements from the thermal infrared sounder IASI and the UV-VIS instrument GOME-2 in services related to aviation hazard and early warning of volcanic unrest. The high sensitivity of both instruments to SO2 allows the detection and global tracking of volcanic eruption plumes and makes them a valuable tool for volcanic aviation hazard mitigation. The GOME-2 and IASI SO2 data are produced in near-real time and distributed to the Volcanic Ash Advisory Centers (VAACS) to assist them in issuing alerts to airlines and air traffic control organizations. Examples of recent eruptions affecting air traffic are presented including Jebel al Tair (Yemen, September 2007), Mount Okmok (Alaska, July 2008), and Mount Kasatochi (Alaska, August 2008). In addition, GOME-2 can detect changes in the SO2 emissions from passively degassing volcanoes and, therefore, provide critical information for hazard assessment. The monitoring of pre-eruptive degassing by GOME-2 is used in early warning of volcanic activity by a mobile volcano fast response system in combination with numerous other parameters, such as seismicity, deformation, and thermal anomalies.