Pierre-Marie Coulon

Investigation of indium gallium nitride facet-dependent nonpolar growth rates and composition for core–shell light-emitting diodes

Abstract. Core–shell indium gallium nitride (InGaN)/gallium nitride (GaN) structures are attractive as light emitters due to the large nonpolar surface of rod-like cores with their longitudinal axis aligned along the c-direction. These facets do not suffer from the quantum-confined Stark effect that limits the thickness of quantum wells and efficiency in conventional light-emitting devices. Understanding InGaN growth on these submicron three-dimensional structures is important to optimize optoelectronic device performance. In this work, the influence of reactor parameters was determined and compared. GaN nanorods (NRs) with both {11-20} a-plane and {10-10} m-plane nonpolar facets were prepared to investigate the impact of metalorganic vapor phase epitaxy reactor parameters on the characteristics of a thick (38 to 85 nm) overgrown InGaN shell. The morphology and optical emission properties of the InGaN layers were investigated by scanning electron microscopy, transmission electron microscopy, and cathodoluminescence hyperspectral imaging. The study reveals that reactor pressure has an important impact on the InN mole fraction on the {10-10} m-plane facets, even at a reduced growth rate. The sample grown at 750°C and 100 mbar had an InN mole fraction of 25% on the {10-10} facets of the NRs.

Dataset for Structural and optical emission uniformity of m-plane InGaN single quantum wells in core-shell nanorods

This dataset contains the results of scanning electron microscopy (SEM), transmission electron microscopy (TEM) and Energy Dispersive X-ray (EDX) measurements carried out on InGaN/GaN core-shell nanostructures. The samples are highly regular arrays of GaN plasma etched cores onto which wide InGaN layer capped with a GaN layer were grown using different metal organic vapour phase epitaxy (MOVPE) growth parameters. Three different growth temperature were used to grow the InGaN layer: 750°C, 700°C and 650°C. SEM images were used to characterize the describe the fabrication, growth and assess nanorod morphologies. TEM were used to investigate the structural properties and assess the InGaN thickness along the entire length of the m-plane facets. EDX measurements were used to assess the homogeneity of the InGaN layer composition at different position along the m-plane facet and on the semi-polar facets.

Dataset for Investigation of InGaN facet-dependent non-polar growth rates and composition for core-shell LEDs

This dataset contains the results of scanning electron microscopy (SEM) and transmission electron microscopy (TEM) measurements carried out on core-shell nanostructures. The samples are highly regular arrays of GaN plasma etched cores onto which thick InGaN layers were grown using different metal organic vapour phase epitaxy (MOVPE) growth parameters. Three different InGaN growth conditions were considered with the following parameters: 750°C at 300 mbar, 700°C at 300 mbar and 750°C at 100 mbar. Statistical growth rates were determined on the non-polar crystal planes from measurements of increase in diameter using SEM images. TEM analysis was carried out on a single nanorod for greater detail.

Hybrid top-down/bottom-up fabrication of a highly uniform and organized faceted AlN nanorod scaffold

As a route to the formation of regular arrays of AlN nanorods, in contrast to other III-V materials, the use of selective area growth via metal organic vapor phase epitaxy (MOVPE) has so far not been successful. Therefore, in this work we report the fabrication of a highly uniform and ordered AlN nanorod scaffold using an alternative hybrid top-down etching and bottom-up regrowth approach. The nanorods are created across a full 2-inch AlN template by combining Displacement Talbot Lithography and lift-off to create a Ni nanodot mask, followed by chlorine-based dry etching. Additional KOH-based wet etching is used to tune the morphology and the diameter of the nanorods. The resulting smooth and straight morphology of the nanorods after the two-step dry-wet etching process is used as a template to recover the AlN facets of the nanorods via MOVPE regrowth. The facet recovery is performed for various growth times to investigate the growth mechanism and the change in morphology of the AlN nanorods. Structural characterization highlights, first, an efficient dislocation filtering resulting from the ~130 nm diameter nanorods achieved after the two-step dry-wet etching process, and second, a dislocation bending induced by the AlN facet regrowth. A strong AlN near band edge emission is observed from the nanorods both before and after regrowth. The achievement of a highly uniform and organized faceted AlN nanorod scaffold having smooth and straight non-polar facets and improved structural and optical quality is a major stepping stone toward the fabrication of deep UV core-shell-based AlN or AlxGa1-xN templates.

Deep UV Emission from Highly Ordered AlGaN/AlN Core–Shell Nanorods

Three-dimensional core-shell nanostructures could resolve key problems existing in conventional planar deep UV light-emitting diode (LED) technology due to their high structural quality, high-quality nonpolar growth leading to a reduced quantum-confined Stark effect and their ability to improve light extraction. Currently, a major hurdle to their implementation in UV LEDs is the difficulty of growing such nanostructures from Al xGa1- xN materials with a bottom-up approach. In this paper, we report the successful fabrication of an AlN/Al xGa1- xN/AlN core-shell structure using an original hybrid top-down/bottom-up approach, thus representing a breakthrough in applying core-shell architecture to deep UV emission. Various AlN/Al xGa1- xN/AlN core-shell structures were grown on optimized AlN nanorod arrays. These were created using displacement Talbot lithography (DTL), a two-step dry-wet etching process, and optimized AlN metal organic vapor phase epitaxy regrowth conditions to achieve the facet recovery of straight and smooth AlN nonpolar facets, a necessary requirement for subsequent growth. Cathodoluminescence hyperspectral imaging of the emission characteristics revealed that 229 nm deep UV emission was achieved from the highly uniform array of core-shell AlN/Al xGa1- xN/AlN structures, which represents the shortest wavelength achieved so far with a core-shell architecture. This hybrid top-down/bottom-up approach represents a major advance for the fabrication of deep UV LEDs based on core-shell nanostructures.

Optical properties and resonant cavity modes in axial InGaN/GaN nanotube microcavities

Microcavities based on group-III nitride material offer a notable platform for the investigation of light-matter interactions as well as the development of devices such as high efficiency light emitting diodes (LEDs) and low-threshold nanolasers. Disk or tube geometries in particular are attractive for low-threshold lasing applications due to their ability to support high finesse whispering gallery modes (WGMs) and small modal volumes. In this article we present the fabrication of homogenous and dense arrays of axial InGaN/GaN nanotubes via a combination of displacement Talbot lithography (DTL) for patterning and inductively coupled plasma top-down dry-etching. Optical characterization highlights the homogeneous emission from nanotube structures. Power-dependent continuous excitation reveals a non-uniform light distribution within a single nanotube, with vertical confinement between the bottom and top facets, and radial confinement within the active region. Finite-difference time-domain simulations, taking into account the particular shape of the outer diameter, indicate that the cavity mode of a single nanotube has a mixed WGM-vertical Fabry-Perot mode (FPM) nature. Additional simulations demonstrate that the improvement of the shape symmetry and dimensions primarily influence the Q-factor of the WGMs whereas the position of the active region impacts the coupling efficiency with one or a family of vertical FPMs. These results show that regular arrays of axial InGaN/GaN nanotubes can be achieved via a low-cost, fast and large-scale process based on DTL and top-down etching. These techniques open a new perspective for cost effective fabrication of nano-LED and nano-laser structures along with bio-chemical sensing applications.