Pierre Nassoy

Cells Respond to Mechanical Stress by Rapid Disassembly of Caveolae

The functions of caveolae, the characteristic plasma membrane invaginations, remain debated. Their abundance in cells experiencing mechanical stress led us to investigate their role in membrane-mediated mechanical response. Acute mechanical stress induced by osmotic swelling or by uniaxial stretching results in a rapid disappearance of caveolae, in a reduced caveolin/Cavin1 interaction, and in an increase of free caveolins at the plasma membrane. Tether-pulling force measurements in cells and in plasma membrane spheres demonstrate that caveola flattening and disassembly is the primary actin- and ATP-independent cell response that buffers membrane tension surges during mechanical stress. Conversely, stress release leads to complete caveola reassembly in an actin- and ATP-dependent process. The absence of a functional caveola reservoir in myotubes from muscular dystrophic patients enhanced membrane fragility under mechanical stress. Our findings support a new role for caveolae as a physiological membrane reservoir that quickly accommodates sudden and acute mechanical stresses.

Curvature-driven lipid sorting needs proximity to a demixing point and is aided by proteins

Sorting of lipids and proteins is a key process allowing eukaryotic cells to execute efficient and accurate intracellular transport and to maintain membrane homeostasis. It occurs during the formation of highly curved transport intermediates that shuttle between cell compartments. Protein sorting is reasonably well described, but lipid sorting is much less understood. Lipid sorting has been proposed to be mediated by a physical mechanism based on the coupling between membrane composition and high curvature of the transport intermediates. To test this hypothesis, we have performed a combination of fluorescence and force measurements on membrane tubes of controlled diameters pulled from giant unilamellar vesicles. A model based on membrane elasticity and nonideal solution theory has also been developed to explain our results. We quantitatively show, using 2 independent approaches, that a difference in lipid composition can build up between a curved and a noncurved membrane. Importantly, and consistent with our theory, lipid sorting occurs only if the system is close to a demixing point. Remarkably, this process is amplified when even a low fraction of lipids is clustered upon cholera toxin binding. This can be explained by the reduction of the entropic penalty of lipid sorting when some lipids are bound together by the toxin. Our results show that curvature-induced lipid sorting results from the collective behavior of lipids and is even amplified in the presence of lipid-clustering proteins. In addition, they suggest a generic mechanism by which proteins can facilitate lipid segregation in vivo.

The universal dynamics of cell spreading.

Cell adhesion and motility depend strongly on the interactions between cells and extracellular matrix (ECM) substrates. When plated onto artificial adhesive surfaces, cells first flatten and deform extensively as they spread. At the molecular level, the interaction of membrane-based integrins with the ECM has been shown to initiate a complex cascade of signaling events [1], which subsequently triggers cellular morphological changes and results in the generation of contractile forces [2]. Here, we focus on the early stages of cell spreading and probe their dynamics by quantitative visualization and biochemical manipulation with a variety of cell types and adhesive surfaces, adhesion receptors, and cytoskeleton-altering drugs. We find that the dynamics of adhesion follows a universal power-law behavior. This is in sharp contrast with the common belief that spreading is regulated by either the diffusion of adhesion receptors toward the growing adhesive patch [3-5] or by actin polymerization [6-8]. To explain this, we propose a simple quantitative and predictive theory that models cells as viscous adhesive cortical shells enclosing a less viscous interior. Thus, although cell spreading is driven by well-identified biomolecular interactions, it is dynamically limited by its mesoscopic structure and material properties.

Membrane curvature controls dynamin polymerization

The generation of membrane curvature in intracellular traffic involves many proteins that can curve lipid bilayers. Among these, dynamin-like proteins were shown to deform membranes into tubules, and thus far are the only proteins known to mechanically drive membrane fission. Because dynamin forms a helical coat circling a membrane tubule, its polymerization is thought to be responsible for this membrane deformation. Here we show that the force generated by dynamin polymerization, 18 pN, is sufficient to deform membranes yet can still be counteracted by high membrane tension. Importantly, we observe that at low dynamin concentration, polymer nucleation strongly depends on membrane curvature. This suggests that dynamin may be precisely recruited to membrane buds’ necks because of their high curvature. To understand this curvature dependence, we developed a theory based on the competition between dynamin polymerization and membrane mechanical deformation. This curvature control of dynamin polymerization is predicted for a specific range of concentrations (∼0.1–10 μM), which corresponds to our measurements. More generally, we expect that any protein that binds or self-assembles onto membranes in a curvature-coupled way should behave in a qualitatively similar manner, but with its own specific range of concentration.

Cellular capsules as a tool for multicellular spheroid production and for investigating the mechanics of tumor progression in vitro

Significance Tumor growth intrinsically generates pressure onto the surrounding tissues, which conversely compress the tumor. These mechanical forces have been suggested to contribute to tumor growth regulation. We developed a microfluidic technique to produce 3D cell-based assays and to interrogate the interplay between tumor growth and mechanics in vitro. Multicellular spheroids are grown in permeable elastic capsules. Capsule deformation provides a direct measure of the exerted pressure. By simultaneously imaging the spheroid by confocal microscopy, we show that confinement induces a drastic cellular reorganization, including increased motility of peripheral cells. We propose that compressive stress has a beneficial impact on slowing down tumor evolution but may have a detrimental effect by triggering cell invasion and metastasis. Deciphering the multifactorial determinants of tumor progression requires standardized high-throughput preparation of 3D in vitro cellular assays. We present a simple microfluidic method based on the encapsulation and growth of cells inside permeable, elastic, hollow microspheres. We show that this approach enables mass production of size-controlled multicellular spheroids. Due to their geometry and elasticity, these microcapsules can uniquely serve as quantitative mechanical sensors to measure the pressure exerted by the expanding spheroid. By monitoring the growth of individual encapsulated spheroids after confluence, we dissect the dynamics of pressure buildup toward a steady-state value, consistent with the concept of homeostatic pressure. In turn, these confining conditions are observed to increase the cellular density and affect the cellular organization of the spheroid. Postconfluent spheroids exhibit a necrotic core cemented by a blend of extracellular material and surrounded by a rim of proliferating hypermotile cells. By performing invasion assays in a collagen matrix, we report that peripheral cells readily escape preconfined spheroids and cell–cell cohesivity is maintained for freely growing spheroids, suggesting that mechanical cues from the surrounding microenvironment may trigger cell invasion from a growing tumor. Overall, our technology offers a unique avenue to produce in vitro cell-based assays useful for developing new anticancer therapies and to investigate the interplay between mechanics and growth in tumor evolution.

MT1-MMP-Dependent Invasion Is Regulated by TI-VAMP/VAMP7

Proteolytic degradation of the extracellular matrix (ECM) is one intrinsic property of metastatic tumor cells to breach tissue barriers and to disseminate into different tissues. This process is initiated by the formation of invadopodia, which are actin-driven, finger-like membrane protrusions. Yet, little is known on how invadopodia are endowed with the functional machinery of proteolytic enzymes [1, 2]. The key protease MT1-MMP (membrane type 1-matrix metalloproteinase) confers proteolytic activity to invadopodia and thus invasion capacity of cancer cells [3-6]. Here, we report that MT1-MMP-dependent matrix degradation at invadopodia is regulated by the v-SNARE TI-VAMP/VAMP7, hence providing the molecular inventory mediating focal degradative activity of cancer cells. As observed by TIRF microscopy, MT1-MMP-mCherry and GFP-VAMP7 were simultaneously detected at proteolytic sites. Functional ablation of VAMP7 decreased the ability of breast cancer cells to degrade and invade in a MT1-MMP-dependent fashion. Moreover, the number of invadopodia was dramatically decreased in VAMP7- and MT1-MMP-depleted cells, indicative of a positive-feedback loop in which the protease as a cargo of VAMP7-targeted transport vesicles regulates maturation of invadopodia. Collectively, these data point to a specific role of VAMP7 in delivering MT1-MMP to sites of degradation, maintaining the functional machinery required for invasion.

Bursting of sensitive polymersomes induced by curling.

Polymersomes, which are stable and robust vesicles made of block copolymer amphiphiles, are good candidates for drug carriers or micro/nanoreactors. Polymer chemistry enables almost unlimited molecular design of responsive polymersomes whose degradation upon environmental changes has been used for the slow release of active species. Here, we propose a strategy to remotely trigger instantaneous polymersome bursting. We have designed asymmetric polymer vesicles, in which only one leaflet is composed of responsive polymers. In particular, this approach has been successfully achieved by using a UV-sensitive liquid-crystalline copolymer. We study experimentally and theoretically this bursting mechanism and show that it results from a spontaneous curvature of the membrane induced by the remote stimulus. The versatility of this mechanism should broaden the range of applications of polymersomes in fields such as drug delivery, cosmetics and material chemistry.

Fast dissociation kinetics between individual E-cadherin fragments revealed by flow chamber analysis

E‐cadherin is the predominant adhesion molecule of epithelia. The interaction between extracellular segments of E‐cadherin in the membrane of opposing cells is homophilic and calcium dependent. Whereas it is widely accepted that the specificity of the adhesive interaction is localized to the N‐terminal domain, the kinetics of the recognition process are unknown. We report the first quantitative data describing the dissociation kinetics of individual E‐cadherin interactions. Aggregation assays indicate that the two outermost domains of E‐cadherin (E/EC1–2) retain biological activity when chemically immobilized on glass beads. Cadherin fragment trans‐interaction was analysed using a flow chamber technique. Transient tethers had first‐order kinetics, suggesting a unimolecular interaction. The unstressed lifetime of individual E‐cadherin interactions was as brief as 2 s. A fast off rate and the low tensile strength of the E‐cadherin bond may be necessary to support the high selectivity and plasticity of epithelial cell interactions.

Membrane tension regulates motility by controlling lamellipodium organization

Many cell movements proceed via a crawling mechanism, where polymerization of the cytoskeletal protein actin pushes out the leading edge membrane. In this model, membrane tension has been seen as an impediment to filament growth and cell motility. Here we use a simple model of cell motility, the Caenorhabditis elegans sperm cell, to test how membrane tension affects movement and cytoskeleton dynamics. To enable these analyses, we create transgenic worm strains carrying sperm with a fluorescently labeled cytoskeleton. Via osmotic shock and deoxycholate treatments, we relax or tense the cell membrane and quantify apparent membrane tension changes by the membrane tether technique. Surprisingly, we find that membrane tension reduction is correlated with a decrease in cell displacement speed, whereas an increase in membrane tension enhances motility. We further demonstrate that apparent polymerization rates follow the same trends. We observe that membrane tension reduction leads to an unorganized, rough lamellipodium, composed of short filaments angled away from the direction of movement. On the other hand, an increase in tension reduces lateral membrane protrusions in the lamellipodium, and filaments are longer and more oriented toward the direction of movement. Overall we propose that membrane tension optimizes motility by streamlining polymerization in the direction of movement, thus adding a layer of complexity to our current understanding of how membrane tension enters into the motility equation.

Hydrodynamic narrowing of tubes extruded from cells

We discuss the pulling force f required to extrude a lipid tube from a living cell as a function of the extrusion velocity L̇. The main feature is membrane friction on the cytoskeleton. As recently observed for neutrophils, the tether force exhibits a “shear thinning” response over a large range of pulling velocities, which was previously interpreted by assuming viscoelastic flows of the sliding membrane. Here, we propose an alternative explanation based on purely Newtonian flow: The diameter of the tether decreases concomitantly with the increase of the membrane tension in the lipid tube. The pulling force is found to vary as L̇13, which is consistent with reported experimental data for various types of cells.