Pieter Glatzel

Simultaneous femtosecond X-ray spectroscopy and diffraction of photosystem II at room temperature.

One Protein, Two Probes A central challenge in the use of x-ray diffraction to characterize macromolecular structure is the propensity of the high-energy radiation to damage the sample during data collection. Recently, a powerful accelerator-based, ultrafast x-ray laser source has been used to determine the geometric structures of small protein crystals too fragile for conventional diffraction techniques. Kern et al. (p. 491, published online 14 February) now pair this method with concurrent x-ray emission spectroscopy to probe electronic structure, as well as geometry, and were able to characterize the metal oxidation states in the oxygen-evolving complex within photosystem II crystals, while simultaneously verifying the surrounding protein structure. A powerful x-ray laser source can extract the geometry and electronic structure of metalloenzymes prior to damaging them. Intense femtosecond x-ray pulses produced at the Linac Coherent Light Source (LCLS) were used for simultaneous x-ray diffraction (XRD) and x-ray emission spectroscopy (XES) of microcrystals of photosystem II (PS II) at room temperature. This method probes the overall protein structure and the electronic structure of the Mn4CaO5 cluster in the oxygen-evolving complex of PS II. XRD data are presented from both the dark state (S1) and the first illuminated state (S2) of PS II. Our simultaneous XRD-XES study shows that the PS II crystals are intact during our measurements at the LCLS, not only with respect to the structure of PS II, but also with regard to the electronic structure of the highly radiation-sensitive Mn4CaO5 cluster, opening new directions for future dynamics studies.

Biotic and abiotic products of Mn(II) oxidation by spores of the marine Bacillus sp. strain SG-1

Abstract Bacterial Mn(II) oxidization by spores of Bacillus, sp. strain SG-1 has been systematically probed over the time scale 0.22 to 77 days under in-situ conditions and at differing Mn(II) concentrations. Three complementary techniques, K-edge X-ray absorption near-edge spectroscopy (XANES), X-ray emission spectroscopy (XES), and in-situ synchrotron radiation-based X-ray diffraction (SR-XRD), have been utilized to examine time-dependent changes in Mn oxidation state, local-, and long-range structure in amorphous, crystalline, cell-bound, and solute Mn species. The primary solid biogenic product of Mn(II) oxidation is an X-ray amorphous oxide similar to δ-MnO2, which has a Mn oxidation state between 3.7 and 4.0. Reaction of Mn(II) with the primary biogenic oxide results in the production of abiotic secondary products, feitknechtite or a 10 Å Na phyllomanganate. The identity of the secondary product depends upon the Mn(II) concentration as described by thermodynamic relations. A decrease in the dissolved Mn(II) concentration is followed by mineralogic transformation of the secondary products. Thus, Mn(II) appears to act as a reductant toward the biogenic oxide and to control the stability of secondary reaction products. Mineralogic changes similar to these are likely to be commonplace in natural settings where bacterial Mn(II) oxidation is occurring and may liberate sorbed metal ions or alter the rates of important Mn oxide surface-mediated processes such as the degradation of organic molecules. It is plausible that microbes may exploit such mineral transformation reactions to indirectly control specific chemical conditions in the vicinity of the cell.

The 1s x-ray absorption pre-edge structures in transition metal oxides

We develop a general procedure to analyse the pre-edges in 1s x-ray absorption near edge structure (XANES) of transition metal oxides and coordination complexes. Transition metal coordination complexes can be described from a local model with one metal ion. The 1s 3d quadrupole transitions are calculated with the charge-transfer multiplet program. Tetrahedral coordination complexes have more intense pre-edge structures due to the local mixing of 3d and 4p states, implying a combination of 1s 3d quadrupole and 1s 4p dipole transitions. Divalent transition metal oxides can be described similar to coordination complexes, but for trivalent and tetravalent oxides, additional structures are visible in the pre-edge region due to non-local dipole transitions. The 1s 4p dipole transitions have large cross section at the 3d-band region due to the strong metal-metal interactions, which are oxygen mediated. This yields large intensity in the 3d-band region but at a different energy than the local 1s 3d quadrupole transitions because of smaller core-hole effects due to the delocalization of the excited electron.

Taking snapshots of photosynthetic water oxidation using femtosecond X-ray diffraction and spectroscopy

The dioxygen we breathe is formed from water by its light-induced oxidation in photosystem II. O2 formation takes place at a catalytic manganese cluster within milliseconds after the photosystem II reaction center is excited by three single-turnover flashes. Here we present combined X-ray emission spectra and diffraction data of 2 flash (2F) and 3 flash (3F) photosystem II samples, and of a transient 3F′ state (250 μs after the third flash), collected under functional conditions using an X-ray free electron laser. The spectra show that the initial O-O bond formation, coupled to Mn-reduction, does not yet occur within 250 μs after the third flash. Diffraction data of all states studied exhibit an anomalous scattering signal from Mn but show no significant structural changes at the present resolution of 4.5 Å. This study represents the initial frames in a molecular movie of the structural changes during the catalytic reaction in photosystem II.

Room temperature femtosecond X-ray diffraction of photosystem II microcrystals

Most of the dioxygen on earth is generated by the oxidation of water by photosystem II (PS II) using light from the sun. This light-driven, four-photon reaction is catalyzed by the Mn4CaO5 cluster located at the lumenal side of PS II. Various X-ray studies have been carried out at cryogenic temperatures to understand the intermediate steps involved in the water oxidation mechanism. However, the necessity for collecting data at room temperature, especially for studying the transient steps during the O–O bond formation, requires the development of new methodologies. In this paper we report room temperature X-ray diffraction data of PS II microcrystals obtained using ultrashort (< 50 fs) 9 keV X-ray pulses from a hard X-ray free electron laser, namely the Linac Coherent Light Source. The results presented here demonstrate that the ”probe before destroy” approach using an X-ray free electron laser works even for the highly-sensitive Mn4CaO5 cluster in PS II at room temperature. We show that these data are comparable to those obtained in synchrotron radiation studies as seen by the similarities in the overall structure of the helices, the protein subunits and the location of the various cofactors. This work is, therefore, an important step toward future studies for resolving the structure of the Mn4CaO5 cluster without any damage at room temperature, and of the reaction intermediates of PS II during O–O bond formation.

Nanoflow electrospinning serial femtosecond crystallography

An electrospun liquid microjet has been developed that delivers protein microcrystal suspensions at flow rates of 0.14-3.1 µl min(-1) to perform serial femtosecond crystallography (SFX) studies with X-ray lasers. Thermolysin microcrystals flowed at 0.17 µl min(-1) and diffracted to beyond 4 Å resolution, producing 14,000 indexable diffraction patterns, or four per second, from 140 µg of protein. Nanoflow electrospinning extends SFX to biological samples that necessitate minimal sample consumption.

X-ray emission spectroscopy

We describe the chemical information that can be obtained by means of hard X-ray emission spectroscopy (XES). XES is presented as a technique that is complementary to X-ray absorption spectroscopy (XAS) and that provides valuable information with respect to the electronic structure (local charge- and spin-density) as well as the ligand environment of a 3d transition metal. We address non-resonant and resonant XES and present results that were recorded on Mn model systems and the Mn4Ca-cluster in the oxygen evolving complex of photosystem II. A brief description of the instrumentation is given with an outlook toward future developments.

Accurate macromolecular structures using minimal measurements from X-ray free-electron lasers

X-ray free-electron laser (XFEL) sources enable the use of crystallography to solve three-dimensional macromolecular structures under native conditions and without radiation damage. Results to date, however, have been limited by the challenge of deriving accurate Bragg intensities from a heterogeneous population of microcrystals, while at the same time modeling the X-ray spectrum and detector geometry. Here we present a computational approach designed to extract meaningful high-resolution signals from fewer diffraction measurements.

X-ray Emission Spectroscopy to Study Ligand Valence Orbitals in Mn Coordination Complexes

We discuss a spectroscopic method to determine the character of chemical bonding and for the identification of metal ligands in coordination and bioinorganic chemistry. It is based on the analysis of satellite lines in X-ray emission spectra that arise from transitions between valence orbitals and the metal ion 1s level (valence-to-core XES). The spectra, in connection with calculations based on density functional theory (DFT), provide information that is complementary to other spectroscopic techniques, in particular X-ray absorption (XANES and EXAFS). The spectral shape is sensitive to protonation of ligands and allows ligands, which differ only slightly in atomic number (e.g., C, N, O...), to be distinguished. A theoretical discussion of the main spectral features is presented in terms of molecular orbitals for a series of Mn model systems: [Mn(H(2)O)(6)](2+), [Mn(H(2)O)(5)OH](+), and [Mn(H(2)O)(5)NH(3)](2+). An application of the method, with comparison between theory and experiment, is presented for the solvated Mn(2+) ion in water and three Mn coordination complexes, namely [LMn(acac)N(3)]BPh(4), [LMn(B(2)O(3)Ph(2))(ClO(4))], and [LMn(acac)N]BPh(4), where L represents 1,4,7-trimethyl-1,4,7-triazacyclononane, acac stands for the 2,4-pentanedionate anion, and B(2)O(3)Ph(2) represents the 1,3-diphenyl-1,3-dibora-2-oxapropane-1,3-diolato dianion.

Generating Highly Active Partially Oxidized Platinum during Oxidation of Carbon Monoxide over Pt/Al2O3: In Situ, Time-Resolved, and High-Energy-Resolution X-Ray Absorption Spectroscopy

High activity is generated by sudden formation of disordered oxidic platinum over a platinum catalyst supported on alumina (see picture). High temperature and low concentration of carbon monoxide are required to generate high activity.