Pietro Bracco

Effects of different jaw relations on postural stability in human subjects.

Authors investigated the effects of different jaws relations on body posture in a sample of 95 subjects. All subjects underwent a posturometric and stabilometric analysis using a computerized footboard. Tests were performed in three mandibular positions: centric occlusion, rest position and myocentric position, respectively determined by teeth engagement, joints position, and muscles contraction. All subjects showed variations of body posture in the different mandibular positions. Statistical analysis (analysis of variance for repeated measures) confirmed that postural variations in different jaws relations were significant: in particular, the SKN multiple comparison test showed that myocentric position improved postural balance on frontal plane with respect to the other jaw positions considered.

Surface electromyography in the assessment of jaw elevator muscles

Surface electromyography (EMG) allows the non-invasive investigation of the bioelectrical phenomena of muscular contraction. The clinical application of surface EMG recordings has been long debated. This paper reviews the main limitations and the current applications of the surface EMG in the investigation of jaw elevator muscles. Methodological factors associated with the recording of the surface EMG may reduce the reliability and sensitivity of this technique and may have been the cause of controversial results reported in different studies. Despite these problems, several clinical applications of surface EMG in jaw muscles are promising. Moreover, technological advances in signal detection and processing have improved the quality of the information extracted from the surface EMG and furthered our understanding of the anatomy and physiology of the stomatognathic apparatus.

Muscular activation during reverse and non-reverse chewing cycles in unilateral posterior crossbite

The aim of this study was to characterize the kinematics and masseter muscle activation in unilateral posterior crossbite. Eighty-two children (8.6 +/- 1.3 yr of age) with unilateral posterior crossbite and 12 children (8.9 +/- 0.6 yr of age) with normal occlusion were selected for the study. Electromyography (EMG) and kinematics were concurrently recorded during mastication of a soft bolus and a hard bolus. The percentage of reverse cycles in the group of patients was 59.0 +/- 33.1% (soft bolus) and 69.7 +/- 29.7% (hard bolus) when chewing on the crossbite side. When chewing on the non-affected side, the number of reverse cycles was 16.7 +/- 24.5% (soft bolus) and 16.7 +/- 22.3% (hard bolus). The reverse cycles on the crossbite side were narrower with respect to the cycles on the non-affected side. Although both types of cycles in patients resulted in lower EMG activity of the masseter of the crossbite side than of the contralateral masseter, the activity of the non-affected side was larger for reverse than for non-reverse cycles. It was concluded that when chewing on the crossbite side, the masseter activity is reduced on the mastication side (crossbite) and is unaltered (non-reverse cycles) or increased (reverse) on the non-affected side.

Chewing pattern and muscular activation in open bite patients

Different studies have indicated, in open bite patients, that masticatory muscles tend to generate a small maximum bite force and to show a reduced cross-sectional area with a lower EMG activity. The aim of this study was to evaluate the kinematics parameters of the chewing cycles and the activation of masseters and anterior temporalis muscles of patients with anterior dental open bite malocclusion. There have been no previous reports evaluating both kinematic values and EMG activity of patients with anterior open bite during chewing. Fifty-two young patients (23 boys and 29 girls; mean age±SD 11.5±1.2 and 10.2±1.6years, respectively) with anterior open bite malocclusion and 21 subjects with normal occlusion were selected for the study. Kinematics parameters and surface electromyography (EMG) were simultaneously recorded during chewing a hard bolus with a kinesiograph K7-I Myotronics-Usa. The results showed a statistically significant difference between the open bite patients and the control group for a narrower chewing pattern, a shorter total and closing duration of the chewing pattern, a lower peak of both the anterior temporalis and the masseter of the bolus side. In this study, it has been observed that open bite patients, lacking the inputs from the anterior guidance, that are considered important information for establishing the motor scheme of the chewing pattern, show narrower chewing pattern, shorter lasting chewing cycles and lower muscular activation with respect to the control group.

Reproducibility of surface EMG in the human masseter and anterior temporalis muscle areas

Abstract The aim of this study was to test the hypothesis that surface electromyography (sEMG) recordings, made at mandibular rest position from the masseter and temporalis anterior areas, are intraand inter-session reproducible. A template was designed and built to permit the correct electrode placement from one session to the next session. A sample of 18 subjects was examined. Two groups, homogeneous for age, sex, and craniofacial morphology were selected. The first group included asymptomatic subjects with no signs or symptoms of temporomandibular joint dysfunction (TMD) and the second group included patients suffering from muscle-related TMD. Data were obtained from different sEMG recordings made at mandibular rest position in the same session and in different sessions, repositioning the electrodes using a template designed for that purpose. The electromyograph used in this study is part of the EMG K6-l Win Diagnostic System. Results showed that reproducibility of sEMG signals from the masseter and anterior temporalis areas at mandibular rest position is possible.

Advantages of cone beam computed tomography (CBCT) in the orthodontic treatment planning of cleidocranial dysplasia patients: a case report

Our aim was to discuss, by presenting a case, the possibilities connected to the use of a CBCT exam in the dental evaluation of patients with Cleidocranial Dysplasia (CCD), an autosomal dominant skeletal dysplasia with delayed exfoliation of deciduous and eruption of permanent teeth and multiple supernumeraries, often impacted. We think that CBCT in this patient was adequate to accurately evaluate impacted teeth position and anatomy, resulting thus useful both in the diagnostic process and in the treatment planning, with an important reduction in the radiation dose absorbed by the patient.

Quantitative Analysis of the Variability of Unilateral Chewing Movements in Young Adults

Abstract Kinesiography can be used as a diagnostic tool in a dental clinic context. In the current study, a kinesiograph was used to detect and record the three-dimensional motion of the mandibular mid-incisor point during unilateral chewing as a function of time. The aim of the study was to quantify the within-subject short-term reproducibility of the kinesiographic recordings in normal, healthy subjects. Ten seconds of unilateral (right and left) gum chewing were recorded in 20 control subjects using computerized kinesiography. Each subject performed 18 chewing sequences (three repetitions x three sessions x two sides). Chewing cycle duration, volume, standardized depth and width, and the number of reversed cycles were calculated. Intraclass correlation coefficients (two-way random effects analysis of variance with interactions) and paired t-tests were used to compare sessions. For each subject and side, chewing variability was expressed as the coefficient of variation (percentage ratio of standard deviation to mean) of each variable. Mean left and right side mastications were computed over all sessions and subjects. For all the analyzed variables, larger variations between subjects (analysis of variance, p<0.001) than between sessions were found, with intraclass correlation coefficients ranging between 0.432 (left side cycle duration) and 0.989 (right side standardized width). No systematic errors between the three measurement sessions were found for cycle volume and shape (paired t, p>0.05). The highest between subjects/ between sessions variance ratios (up to 223.28) were found for cycle duration and shape. In all subjects, chewing cycle volume was very variable, with mean coefficients of variation up to 47% (left side in females). Cycle duration and standardized depth and width were more reproducible, with mean coefficients of variation up to 10% (duration), 14% (standardized width), and 18% (standardized depth). The spatial characteristics of gum chewing cycles had a large within-subject variability. The temporal and size-standardized (shape) characteristics were more consistent within subject. The results should allow selection of a set of relatively more consistent variables for the definition of normality and the comparison of patients.

Ex vivo measurement reliability using two different cbct scanners for orthodontic purposes

There are many cone beam computed tomography (CBCT) scanners available on the market: detector technology, algorithm precision, and scanner settings influence image quality. The aim of this study was to compare the accuracy of linear measurements made on images of the same sample obtained using two different CBCT scanners.

Cone-beam computed tomography: accuracy of three-dimensional cephalometry analysis and influence of patient scanning position.

Abstract The aim of this research was to analyze the influence of the position of the skull during cone-beam computed tomography (CBCT) scan and if the three-dimensional cephalometric measurements are influenced by skull orientation during CBCT scan. The study consisted of 5 CBCT scanning (KODAK 9500 Cone Beam 3D System unit) in 5 different positions of a dry skull. The data were imported in SIMPLANT OMS Software version 13.0. Fifteen three-dimensional cephalometric measurements were calculated; moreover, the mean, the SD, the maximum/minimum &Dgr;, and the maximum/minimum &Dgr; percentage were calculated. The statistical analysis was performed by an independent-samples t-test to evaluate differences between the 5 scans. No difference was found in all the three-dimensional analysis. Twelve of 15 measurements have a &Dgr; greater than 1.5, and 7 of 15 measurements have a &Dgr; greater than 2. Nine of 15 have a &Dgr; percentage greater than 5%. The preliminary results suggest that the three-dimensional cephalometric analysis is influenced by patient scanning position.

TMJ Clicking: A Comparison of Clinical Examination, Sonography, and Axiography

A sample of 30 subjects, 15 with and 15 without subjective temporomandibular joint (TMJ) complaints (noises, sounds), underwent a clinical examination, a sonography and an axiography, to detect TMJ clicking. The clinical examination found 22 noisy joints in a total of 60 TMJs considered. Axiography found 19 noisy joints and sonography 32. While 90% of the examined joints showed agreement between axiography and clinical examination (with a little higher sensitivity demonstrated by clinical examination with respect to axiography), 20% of the joints were positive for clicking in sonography only. Sonography showed a high sensitivity in detection of joint noises which suggests its utility as a screening test for early detection of craniomandibular disorders.