Pietro Valdastri

Robotic magnetic steering and locomotion of capsule endoscope for diagnostic and surgical endoluminal procedures

This paper describes a novel approach to capsular endoscopy that takes advantage of active magnetic locomotion in the gastrointestinal tract guided by an anthropomorphic robotic arm. Simulations were performed to select the design parameters allowing an effective and reliable magnetic link between the robot end-effector (endowed with a permanent magnet) and the capsular device (endowed with small permanent magnets). In order to actively monitor the robotic endoluminal system and to efficiently perform diagnostic and surgical medical procedures, a feedback control based on inertial sensing was also implemented. The proposed platform demonstrated to be a reliable solution to move and steer a capsular device in a slightly insufflated gastrointestinal lumen.

A New Mechanism for Mesoscale Legged Locomotion in Compliant Tubular Environments

We present design and experimental performance results for a novel mechanism for robotic legged locomotion at the mesoscale (from hundreds of microns to tens of centimeters). The new mechanism is compact and strikes a balance between conflicting design objectives, exhibiting high foot forces and low power consumption. It enables a small robot to traverse a compliant, slippery, tubular environment, even while climbing against gravity. This mechanism is useful for many mesoscale locomotion tasks, including endoscopic capsule robot locomotion in the gastrointestinal tract. It has enabled fabrication of the first legged endoscopic capsule robot whose mechanical components match the dimensions of commercial pill cameras (11 mm diameter by 25 mm long). A novel slot-follower mechanism driven via lead screw enables the mechanical components of the capsule robot to be as small while simultaneously generating 0.63 N average propulsive force at each leg tip. In this paper, we describe kinematic and static analyses of the lead screw and slot-follower mechanisms, optimization of design parameters, and experimental design and tuning of a gait suitable for locomotion. A series of ex vivo experiments demonstrate capsule performance and ability to traverse the intestine in a manner suitable for inspection of the colon in a time period equivalent to standard colonoscopy.

Design of a Novel Bimanual Robotic System for Single-Port Laparoscopy

This paper presents the design and fabrication of Single-Port lapaRoscopy bImaNual roboT (SPRINT), a novel teleoperated robotic system for minimally invasive surgery. SPRINT, specifically designed for single-port laparoscopy, is a high-dexterity miniature robot, able to reproduce the movement of the hands of the surgeon, who controls the system through a master interface. It comprises two arms with six degrees of freedom (DOFs) that can be individually inserted and removed in a 30-mm-diameter umbilical access port. The system is designed to leave a central lumen free during operations, thus allowing the insertion of other laparoscopic tools. The four distal DOFs of each arm are actuated by on-board brushless dc motors, while the two proximal DOFs of the shoulder are actuated by external motors. The constraints generated by maximum size and power requirements led to the design of compact mechanisms for the actuation of the joints. The wrist is actuated by three motors hosted in the forearm, with a peculiar differential mechanism that allows us to have intersecting roll-pitch-roll axes. Preliminary tests and validations were performed ex vivo by surgeons on a first prototype of the system.

Swallowable Medical Devices for Diagnosis and Surgery: The State of the Art

Abstract The first wireless camera pills created a revolutionary new perspective for engineers and physicians, demonstrating for the first time the feasibility of achieving medical objectives deep within the human body from a swallowable, wireless platform. The approximately 10 years since the first camera pill has been a period of great innovation in swallowable medical devices. Many modules and integrated systems have been devised to enable and enhance the diagnostic and even robotic capabilities of capsules working within the gastrointestinal (GI) tract. This article begins by reviewing the motivation and challenges of creating devices to work in the narrow, winding, and often inhospitable GI environment. Then the basic modules of modern swallowable wireless capsular devices are described, and the state of the art in each is discussed. This article is concluded with a perspective on the future potential of swallowable medical devices to enable advanced diagnostics beyond the capability of human visual perception, and even to directly deliver surgical tools and therapy non-invasively to interventional sites deep within the GI tract.

An implantable telemetry platform system for in vivo monitoring of physiological parameters

This paper describes a microcontroller-based multichannel telemetry system, suitable for in vivo monitoring of physiological parameters. The device can digitalize and transmit up to three analog signals coming from different sensors. The telemetry transmission is obtained by using a carrier frequency of 433.92 MHz and an amplitude-shift keying modulation. The signal data rate is 13 kb/s per channel. The digital microcontroller provides good flexibility and interesting performance, such as the threshold monitoring, the transmission error detection, and a low power consumption, thanks to the implementation of a sleep mode. The small overall size (less than 1 cm/sup 3/), the power density compatible with current regulations for the design of implantable devices, and the dedicated packaging make the system suitable for in vivo monitoring in humans. The design, fabrication, operation, packaging, and performance of the system are described in this paper. An in vivo pressure monitoring case study is described as well.

Advanced Technologies for Gastrointestinal Endoscopy

The gastrointestinal tract is home to some of the most deadly human diseases. Exacerbating the problem is the difficulty of accessing it for diagnosis or intervention and the concomitant patient discomfort. Flexible endoscopy has established itself as the method of choice and its diagnostic accuracy is high, but there remain technical limitations in modern scopes, and the procedure is poorly tolerated by patients, leading to low rates of compliance with screening guidelines. Although advancement in clinical endoscope design has been slow in recent years, a critical mass of enabling technologies is now paving the way for the next generation of gastrointestinal endoscopes. This review describes current endoscopes and provides an overview of innovative flexible scopes and wireless capsules that can enable painless endoscopy and/or enhanced diagnostic and therapeutic capabilities. We provide a perspective on the potential of these new technologies to address the limitations of current endoscopes in mass cancer screening and other contexts and thus to save many lives.

Development and Experimental Analysis of a Soft Compliant Tactile Microsensor for Anthropomorphic Artificial Hand

This paper presents the development and preliminary experimental analysis of a soft compliant tactile microsensor (SCTM) with minimum thickness of 2 mm. A high shear sensitive triaxial force microsensor was embedded in a soft, compliant, flexible packaging. The performance of the whole system, including the SCTM, an electronic hardware and a processing algorithm, was evaluated by static calibration, maximum load tests, noise and dynamic tests, and by focusing on slippage experiments. A proper tradeoff between final robustness and sensitivity of the tactile device was identified. The experiments showed that the tactile sensor is sufficiently robust for application in artificial hands while sensitive enough for slip event detection. The sensor signals were elaborated with the cumulative summation algorithm and the results showed that the SCTM system could detect a slip event with a delay from a minimum of 24.5 ms to a maximum of 44 ms in the majority of experiments fulfilling the neurophysiological requirement.

Wireless powering for a self-propelled and steerable endoscopic capsule for stomach inspection

This paper describes the integration of an active locomotion module in a wirelessly powered endoscopic capsule. The device is a submersible capsule optimized to operate in a fluid environment in a liquid-distended stomach. A 3D inductive link is used to supply up to 400mW to the embedded electronics and a set of 4 radio-controlled motor propellers. The design takes advantage of a ferrite-core in the receiving coil-set. This approach significantly improves the coupling with the external field source with respect to earlier work by the group. It doubles the power that can be received with a coreless coil-set under identical external conditions. The upper limit of the received power was achieved complying with the strict regulations for safe exposure of biological tissue to variable magnetic fields. The wireless transferred power was proven to be sufficient to achieve the speed of 7cm/s in any directions. An optimized locomotion strategy was defined which limits the power consumption by running only 2 motors at a time. A user interface and a joystick controller allow to fully drive the capsule in an intuitive manner. The device functionalities were successfully tested in a dry and a wet environment in a laboratory set-up.

Design, Fabrication, and Testing of a Capsule With Hybrid Locomotion for Gastrointestinal Tract Exploration

This paper describes a novel solution for the active locomotion of a miniaturized endoscopic capsule in the gastrointestinal (GI) tract. The authors present the design, development, and testing of a wireless endocapsule with hybrid locomotion, where hybrid locomotion is defined as the combination between internal actuation mechanisms and external magnetic dragging. The capsule incorporates an internal actuating legged mechanism, which modifies the capsule profile, and small permanent magnets, which interact with an external magnetic field, thus imparting a dragging motion to the device. The legged mechanism is actuated whenever the capsule gets lodged in collapsed areas of the GI tract. This allows modification of the capsule profile and enables magnetic dragging to become feasible and effective once again. A key component of the endoscopic pill is the internal mechanism, endowed with a miniaturized brushless motor and featuring compact design, and adequate mechanical performance. The internal mechanism is able to generate a substantial force, which allows the legs to open against the intestinal tissue that has collapsed around the capsule body. An accurate simulation of the performance of the miniaturized motor under magnetic fields was carried out in order to define the best configuration of the internal permanent magnets (which are located very close to the motor) and the best tradeoff operating distance for the external magnet, which is responsible for magnetically dragging the capsule. Finally, a hybrid capsule was developed generating 3.8 N at the tip of the legged mechanism and a magnetic link force up to 135 mN. The hybrid capsule and its wireless control were extensively tested in vitro, ex vivo , and in vivo, thus confirming fulfilment of the design specifications and demonstrating a good ability to manage collapsed areas of the intestinal tract.

Propeller-based wireless device for active capsular endoscopy in the gastric district

An innovative approach to active locomotion for capsular endoscopy in the gastric district is reported in this paper. Taking advantage of the ingestion of 500 ml of transparent liquid by the patient, an effective distension of the stomach is safely achieved for a timeframe of approximately 30 minutes. Given such a scenario, an active swallowable capsule able to navigate inside the stomach thanks to a four propeller system has been developed. The capsule is 15 mm in diameter and 30 mm in length, and it is composed of a supporting shell containing a wireless microcontroller, a battery and four motors. The motors enable the rotation of propellers located in the rear side of the device, thus obtaining a reliable locomotion and steering of the capsule in all directions in a liquid. The power consumption has been properly optimized in order to achieve an operative lifetime consistent with the time of the diagnostic inspection of the gastric district, assumed to be no more than 30 minutes. The capsule can be easily remotely controlled by the endoscopist using a joystick together with a purposely developed graphical user interface. The capsule design, prototyping, in vitro, ex vivo and preliminary in vivo tests are described in this work.