Pingqing Fu

Investigation of the sources and evolution processes of severe haze pollution in Beijing in January 2013

China experienced severe haze pollution in January 2013. Here we have a detailed characterization of the sources and evolution mechanisms of this haze pollution with a focus on four haze episodes that occurred during 10–14 January in Beijing. The main source of data analyzed is from submicron aerosol measurements by an Aerodyne Aerosol Chemical Speciation Monitor. The average PM1 mass concentration during the four haze episodes ranged from 144 to 300 µg m−3, which was more than 10 times higher than that observed during clean periods. All submicron aerosol species showed substantial increases during haze episodes with sulfate being the largest. Secondary inorganic species played enhanced roles in the haze formation as suggested by their elevated contributions during haze episodes. Positive matrix factorization analysis resolved six organic aerosol (OA) factors including three primary OA (POA) factors from traffic, cooking, and coal combustion emissions, respectively, and three secondary OA (SOA) factors. Overall, SOA contributed 41–59% of OA with the rest being POA. Coal combustion OA (CCOA) was the largest primary source, on average accounting for 20–32% of OA, and showed the most significant enhancement during haze episodes. A regional SOA (RSOA) was resolved for the first time which showed a pronounced peak only during the record-breaking haze episode (Ep3) on 12–13 January. The regional contributions estimated based on the steep evolution of air pollutants were found to play dominant roles for the formation of Ep3, on average accounting for 66% of PM1 during the peak of Ep3 with sulfate, CCOA, and RSOA being the largest fractions (> ~ 75%). Our results suggest that stagnant meteorological conditions, coal combustion, secondary production, and regional transport are four main factors driving the formation and evolution of haze pollution in Beijing during wintertime.

Ubiquity of bisphenol A in the atmosphere

Bisphenol A (BPA) is a suspected endocrine disruptor in the environment. However, little is known about its distribution and transport in the atmosphere. Here, the concentrations of BPA in the atmospheric aerosols from urban, rural, marine, and the polar regions were measured using solvent extraction/derivatization and gas chromatography/mass spectrometry technique. The concentrations of BPA (1-17,400 pg m(-3)) ranged over 4 orders of magnitude in the world with a declining trend from the continent (except for the Antarctica) to remote sites. A positive correlation was found between BPA and 1,3,5-triphenylbenzene, a tracer for plastic burning, in urban regions, indicating that the open burning of plastics in domestic waste should be a significant emission source of atmospheric BPA. Our results suggest that the ubiquity of BPA in the atmosphere may raise a requirement for the evaluation of health effects of BPA in order to control its emission sources, for example, from plastic burning.

Penetration of biomass-burning emissions from South Asia through the Himalayas: New insights from atmospheric organic acids

High levels of carbonaceous aerosol exist over South Asia, the area adjacent to the Himalayas and Tibetan Plateau. Little is known about if they can be transported across the Himalayas, and as far inland as the Tibetan Plateau. As important constituents of aerosols, organic acids have been recognized as unique fingerprints to identify the atmospheric process. Here we measured dicarboxylic acids and related compounds in aerosols on the northern slope of Mt. Everest (Qomolangma, 4276 m a.s.l.). Strong positive correlations were observed for dicarboxylic acids with biomass burning tracers, levoglucosan and K+, demonstrating that this area was evidently affected by biomass burning. The seasonal variation pattern of dicarboxylic acids is consistent with OC and EC, being characterized by a pronounced maximum in the pre-monsoon season. Molecular distributions of dicarboxylic acids and related compounds (malonic acid/succinic acid, maleic acid/fumaric acid) further support this finding. We suggest that the local meteorological conditions and regional atmospheric flow process could facilitate the penetration of the carbonaceous aerosols from South Asia throughout the Himalayas. With the consideration of the darkening force of carbonaceous aerosols, our finding has important implication for this climate-sensitive area, where the glacier melting supplies water for billions of people downstream.

“APEC Blue”: Secondary Aerosol Reductions from Emission Controls in Beijing

China implemented strict emission control measures in Beijing and surrounding regions to ensure good air quality during the 2014 Asia-Pacific Economic Cooperation (APEC) summit. We conducted synchronous aerosol particle measurements with two aerosol mass spectrometers at different heights on a meteorological tower in urban Beijing to investigate the variations in particulate composition, sources and size distributions in response to emission controls. Our results show consistently large reductions in secondary inorganic aerosol (SIA) of 61–67% and 51–57%, and in secondary organic aerosol (SOA) of 55% and 37%, at 260 m and ground level, respectively, during the APEC summit. These changes were mainly caused by large reductions in accumulation mode particles and by suppression of the growth of SIA and SOA by a factor of 2–3, which led to blue sky days during APEC commonly referred to as “APEC Blue”. We propose a conceptual framework for the evolution of primary and secondary species and highlight the importance of regional atmospheric transport in the formation of severe pollution episodes in Beijing. Our results indicate that reducing the precursors of secondary aerosol over regional scales is crucial and effective in suppressing the formation of secondary particulates and mitigating PM pollution.

Rapid formation and evolution of an extreme haze episode in Northern China during winter 2015.

We investigate the rapid formation and evolutionary mechanisms of an extremely severe and persistent haze episode that occurred in northern China during winter 2015 using comprehensive ground and vertical measurements, along with receptor and dispersion model analysis. Our results indicate that the life cycle of a severe winter haze episode typically consists of four stages: (1) rapid formation initiated by sudden changes in meteorological parameters and synchronous increases in most aerosol species, (2) persistent evolution with relatively constant variations in secondary inorganic aerosols and secondary organic aerosols, (3) further evolution associated with fog processing and significantly enhanced sulfate levels, and (4) clearing due to dry, cold north-northwesterly winds. Aerosol composition showed substantial changes during the formation and evolution of the haze episode but was generally dominated by regional secondary aerosols (53–67%). Our results demonstrate the important role of regional transport, largely from the southwest but also from the east, and of coal combustion emissions for winter haze formation in Beijing. Also, we observed an important downward mixing pathway during the severe haze in 2015 that can lead to rapid increases in certain aerosol species.

Ultraviolet absorbance titration for determining stability constants of humic substances with Cu(II) and Hg(II)

We describe an ultraviolet (UV) absorbance titration method that can be used to determine complexing capacities (C(L)) and conditional stability constants (logK) of humic substances (HSs) with metal ions such as Cu(II) and Hg(II). Two fulvic acids (FA) and one humic acid (HA) were used for this study. UV absorbance of HSs gradually increased with the addition of Cu(II) or Hg(II) after blank correction, and these increases followed the theoretical 1:1 (ligand:metal ion) binding model. The results from the absorbance titration calculation for HSs with Cu(II) and Hg(II) compared well with those from fluorescence quenching titration. The titration of the model compound l-tyrosine with Cu(II) proved the validity of this method, and the K and C(L) were within 2.3% and 7.4% of the fluorescence quenching titration. The results suggest that the UV absorbance titration can be used to study the binding capacities of HSs and/or dissolved organic matter (DOM) with trace metals. The advantages and disadvantages of the absorbance titration method were also discussed.

High abundances of oxalic, azelaic, and glyoxylic acids and methylglyoxal in the open ocean with high biological activity: Implication for secondary OA formation from isoprene

Atmospheric dicarboxylic acids (DCA) are a ubiquitous water-soluble component of secondary organic aerosols (SOA), which can act as cloud condensation nuclei (CCN), affecting the Earths climate. Despite the high abundances of oxalic acid and related compounds in the marine aerosols, there is no consensus on what controls their distributions over the open ocean. Marine biological productivity could play a role in the production of DCA, but there is no substantial evidence to support this hypothesis. Here we present latitudinal distributions of DCA, oxoacids and α-dicarbonyls in the marine aerosols from the remote Pacific. Their concentrations were found several times higher in more biologically influenced aerosols (MBA) than less biologically influenced aerosols. We propose isoprene and unsaturated fatty acids as sources of DCA as inferred from significantly higher abundances of isoprene-SOA tracers and azelaic acid in MBA. These results have implications toward the reassessment of climate forcing feedbacks of marine-derived SOA.

Real-Time Characterization of Aerosol Particle Composition above the Urban Canopy in Beijing: Insights into the Interactions between the Atmospheric Boundary Layer and Aerosol Chemistry.

Despite extensive efforts into the characterization of air pollution during the past decade, real-time characterization of aerosol particle composition above the urban canopy in the megacity Beijing has never been performed to date. Here we conducted the first simultaneous real-time measurements of aerosol composition at two different heights at the same location in urban Beijing from December 19, 2013 to January 2, 2014. The nonrefractory submicron aerosol (NR-PM1) species were measured in situ by a high-resolution aerosol mass spectrometer at near-ground level and an aerosol chemical speciation monitor at 260 m on a 325 m meteorological tower in Beijing. Secondary aerosol showed similar temporal variations between ground level and 260 m, whereas much weaker correlations were found for the primary aerosol. The diurnal evolution of the ratios and correlations of aerosol species between 260 m and the ground level further illustrated a complex interaction between vertical mixing processes and local source emissions on aerosol chemistry in the atmospheric boundary layer. As a result, the aerosol compositions at the two heights were substantially different. Organic aerosol (OA), mainly composed of primary OA (62%), at the ground level showed a higher contribution to NR-PM1 (65%) than at 260 m (54%), whereas a higher concentration and contribution (15%) of nitrate was observed at 260 m, probably due to the favorable gas-particle partitioning under lower temperature conditions. In addition, two different boundary layer structures were observed, each interacting differently with the evolution processes of aerosol chemistry.

Interaction between carbamazepine and humic substances: a fluorescence spectroscopy study.

Carbamazepine is a popular drug that has been detected in natural environments, but little is known about its biogeochemical cycling, influencing factors, and eco-environmental effects in aquatic ecosystems. Interaction between carbamazepine and humic substances, including fulvic and humic acids, was studied using three-dimensional excitation-emission matrix fluorescence spectroscopy and synchronous-scan fluorescence spectroscopy. The intrinsic fluorescence of humic substances was quenched on the addition of carbamazepine, and static quenching was the primary mechanism. The binding parameters on their interaction, including the conditional binding constants (log K) and binding capacities (C(L)), were estimated by the Ryan-Weber nonlinear theory equation. Log K ranged from 3.41 to 5.04 L/mol at 25 degrees C and pH 7.0. The influence of pH on the complexation and the competition between carbamazepine and Cu(II) for fluorescence-binding sites also were discussed. The present results would be helpful in understanding the fate and biogeochemical cycling of other pharmaceuticals and personal care products in aquatic ecosystems.

Air pollution–aerosol interactions produce more bioavailable iron for ocean ecosystems

Acidic air pollutants dissolve iron in aerosols and fertilize the ocean. It has long been hypothesized that acids formed from anthropogenic pollutants and natural emissions dissolve iron (Fe) in airborne particles, enhancing the supply of bioavailable Fe to the oceans. However, field observations have yet to provide indisputable evidence to confirm this hypothesis. Single-particle chemical analysis for hundreds of individual atmospheric particles collected over the East China Sea shows that Fe-rich particles from coal combustion and steel industries were coated with thick layers of sulfate after 1 to 2 days of atmospheric residence. The Fe in aged particles was present as a “hotspot” of (insoluble) iron oxides and throughout the acidic sulfate coating in the form of (soluble) Fe sulfate, which increases with degree of aging (thickness of coating). This provides the “smoking gun” for acid iron dissolution, because iron sulfate was not detected in the freshly emitted particles and there is no other source or mechanism of iron sulfate formation in the atmosphere.