Pirjo Isosaari

Accumulation and distribution of polychlorinated dibenzo-p-dioxin, dibenzofuran, and polychlorinated biphenyl congeners in Atlantic salmon (Salmo salar).

Adult Atlantic salmon (Salmo salar) were fed on four diets containing polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), and polychlorinated biphenyls (PCBs) for 30 weeks. Lipid-normalized concentrations showed that all congeners were equally partitioned between whole-fish and fillet samples. Skinned fillet accumulated approximately 30% of the total PCDD/F and PCB content in fish. Accumulation efficiencies in whole fish were 43% for 2,3,7,8-chlorinated dibenzo-p-dioxins and dibenzofurans, 83% for dioxin-like PCBs, and 78% for other PCB congeners. Among PCDD/Fs, tetra- and pentachlorinated congeners were preferentially accumulated in salmon, whereas hepta- and octachlorinated dibenzo-p-dioxins were excreted in the feces. Substitution patterns that were associated with a preferential accumulation of PCBs in salmon included non-ortho substitution and tetrachlorination. Accumulation efficiencies and lipid-normalized biomagnification factors (BMFs) were not influenced by the PCDD/F and PCB concentrations of the diets. Biomagnification (BMF > 1) of tetra- and pentachlorinated dibenzo-p-dioxins and dibenzofurans and of all the PCBs was observed. Differences in the behavior of PCDD/F and PCB congeners resulted in a selective enrichment of the most toxic congeners in salmon.

Feeding trial on rainbow trout: comparison of dry fish feed and Baltic herring as a source of PCDD/Fs and PCBs

Fish is an important source of dietary intake of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) and polychlorinated biphenyls (PCBs). To assess bioaccumulation of PCDD/Fs and PCBs in farm-raised fish, rainbow trout were fed with either Baltic herring or dry fish feed. Baltic herring feed had a PCDD/F sum concentration of 125 ng kg(-1) dry weight (d.w.), and dry fish feed contained 18.2 ng kg(-1) d.w. of PCDD/Fs. The PCB concentrations of Baltic herring and dry fish feed were 188 and 48.7 microg kg(-1) d.w., respectively. After feeding with Baltic herring for 4 months, the PCDD/F concentration of the rainbow trout fillet was 27.3 ng kg(-1) fresh weight (f.w.), which was 7.0-fold higher than the initial concentration. The PCDD/F concentration and congener profile in rainbow trout had become almost the same as in Baltic herring. PCDD/Fs were accumulated in the fillet with an efficiency of 21%. Feeding of rainbow trout with dry fish feed resulted in a PCDD/F concentration of 8.08 ng kg(-1) f.w., denoting a 2.1-fold increase from the initial level. The accumulation efficiency was 29%. Time trends in PCB concentrations followed those of PCDD/Fs. After 4 months, the PCB sum concentration in herring-fed rainbow trout was 94.4 pg kg(-1) f.w., whereas in dry fish feed-fed rainbow trout it was 38.6 microg kg(-1) f.w. Accumulation efficiencies of PCBs were higher than those of PCDD/Fs. Based on the accumulated PCDD/F and PCB concentrations, it was estimated that frequent consumption of rainbow trout fed with Baltic herring could lead to a human daily intake that exceeds the recommendation of WHO.

Contamination of river Kymijoki sediments with polychlorinated dibenzo-p-dioxins, dibenzofurans and mercury and their transport to the Gulf of Finland in the Baltic Sea

Kymijoki, the fourth largest river in Finland, has been heavily polluted by pulp mill effluents as well as the chemical industry. Up to 24,000 ton of wood preservative, chlorophenol known as Ky-5, was manufactured in the upper reaches of the river, an unknown amount of which was discharged into the river between 1940 and 1984. Polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) occurred as impurities in the final Ky-5 product. The PCDD/F concentrations and burden in the river sediments were studied and the transport of PCDD/Fs from contaminated sites downstream and into the Gulf of Finland in the Baltic Sea was estimated. More than 190 sediment cores were sampled to estimate the volume of contaminated sediments and the total PCDD/F burden. The transport of PCDD/Fs was estimated using sediment traps placed at several sites. The survey revealed that sediments in the river were heavily polluted by PCDD/Fs, the main toxic congener being 1,2,3,4,6,7,8-heptachlorodibenzofuran, a major contaminant in the Ky-5 product. The mean total concentration at the most polluted river site downstream from the main source was 42000 microg kg(-1) d.w. (106 microg I-TEQ kg(-1)). The elevated concentrations in the coastal region and the present estimated transport from the River Kymijoki confirm earlier assessments that the river is a major source of PCDD/F for the Gulf of Finland.

PCDD/F and PCB history in dated sediments of a rural lake

Concentrations of polychlorinated dibenzo-p-dioxins (PCDD), dibenzofurans (PCDF) and biphenyls (PCB) were analysed from a sediment core, which had been sampled from a remote lake in Finland. The deepest subsamples were analysed from a depth of 4.0 m, and were more than 8000 years old. At the surface of the sediment core, low levels of industrial background contamination were detected. The sum of 2,3,7,8-substituted PCDD/Fs was 35 ng/kg d.w. (dry weight), or 1.2 ng/kg d.w. in WHOs toxicity equivalent, WHO-TEQ. The annual accumulation rate of 2,3,7,8-substituted PCDD/Fs was 1.26 ng m(-2) a(-1). Deeper in the core, PCDD/F concentrations ranged between 2.11 and 11.1 ng/kg d.w. (0.24 and 1.70 ng/kg d.w. WHO-TEQ) and the accumulation rate was 0.11 ng m(-2) a(-1). A characteristic PCDD/F congener profile was found in all pre-industrial sediment layers. The order of concentrations was OCDD > 1,2,3,4,6,7,8-HpCDD > 1,2,3,7,8,9-HxCDD > 1,2,3,4,7,8-HxCDD > 2,3,7,8-TCDD, and concentrations of 2,3,7,8-chlorinated dibenzofurans were below the detection limit. Similar congener profiles have previously been described in samples for which natural PCDD/F formation has been proposed. PCBs were present at low levels in all of the sediment samples. The sum of the PCB concentrations of the sediment subsamples ranged between 50 and 2540 ng/kg d.w., and the three predominant congeners in the core were PCBs 18, 52, and 110.

Photodegradation of polychlorinated dibenzo-p-dioxins and dibenzofurans in soil with vegetable oil

Goal, Scope and BackgroundThis study was carried out to investigate the effect of olive oil on the photodegradation of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/ Fs) in contaminated sawmill soil. Previous studies had shown that the solubility of PCDD/Fs in olive oil is high and a rapid photodegradation of PCDD/Fs takes place in olive oil when irradiated with ultraviolet (blacklight) lamps. The efficiency of this treatment method was evaluated under more practical conditions. These included the use of sunlight irradiation and a lower-grade olive oil, without a preliminary extraction of soil with olive oil.MethodsA 1-cm layer of contaminated sawmill soil was blended with 20 weight-% of olive oil and exposed to sunlight for four weeks. In another experiment, a new dose of olive oil was added at the middle of the exposure period. The PCDD/F concentrations of the soils were monitored periodically.Results and DiscussionA reduction in the concentration of 2,3,7,8-chlorinated PCDD/Fs by 59% and in WHO-TEQ in contaminated sawmill soil by 48% was attained after blending the soil with two doses (20 + 20%) of olive oil and exposing the mixture to sunlight for four weeks. Photodegradation with only one dose of olive oil was less efficient. This suggests that periodical additions of olive oil would be needed to maintain a proper degradation rate. After the oil additions, the WHO-TEQ content of the soil declined with first order reaction half-lives of 19.2 to 19.7 d. The overall half-life during the four-week treatment, however, was 30 d.ConclusionA significant reduction in the PCDD/F concentration of aged sawmill soil can be achieved with a relatively simple olive oil-sunlight treatment.Recommendations and OutlookSome theoretical and technological questions need to be solved before using the investigated soil decontamination method in larger-scale applications. The functions of vegetable oils in photodegradation processes should be studied in more detail. The amount of oil that is needed for a proper solubilisation and photodegradation of PCDD/Fs should be minimised. Moreover, special care should be taken to prevent mobilisation of PCDD/Fs to the surrounding environment and to avoid leaving bioavailable residuals of PCDD/Fs in soil.

Effect of Polyelectrolyte Conditioning and Voltages on Fractionation of Macro and Trace Metals due to Sludge Electro-Dewatering

The purpose of this laboratory study was to investigate the simultaneous impacts of the electro-dewatering process on dry solids (DS) content and mobilization of metals in sewage sludge. The results suggested that the use of polyelectrolytes is necessary in mechanical pressure-driven dewatering and also in electro-dewatering. With polyelectrolyte conditioning, the DS content in the final sludge cake could be increased to 39%. Dewatering with slightly cationic polymer was not effective, but medium, strongly and very strongly cationic polymers performed equally. During electro-dewatering, an increase of voltage from 10 to 40 V resulted in a dryer sludge cake. Polyelectrolyte addition reduced the content of exchangeable metal species and increased less mobile, reducible species in the sludge. Furthermore, the more stable or immobile metal fractions were more likely to remain intact in dewatered sludge. Among heavy metals, Cu and Pb were immobile but Cr, Co, Ni, and Zn could more easily be mobilized during electro-dewatering. The application of high voltage had a direct effect on the migration of metal fractions, whereas, the sludge conditioning by a different cationic polymer had an indirect effect on the migration of these metals during electro-dewatering.

Electromigration of arsenic and co-existing metals in mine tailings

The aim of this study was to investigate the feasibility of enhanced electrokinetic remediation technology for controlled leaching and collection of labile arsenic fractions from mine tailings. Direct current was applied to tailings for 20 d using ammonium oxalate and sodium hydroxide as enhancement solutions. Migration of arsenic was observed, resulting in 63-71% removal near the cathode but only 6-17% overall removal in the entire tailings matrix in 20 d. However, significant migration of arsenic towards the anode and accumulation in a collection well near the anode was observed, especially under alkaline conditions. Thus, treatment time and consumption of chemicals could probably be reduced by installing specific collection or adsorption zones near the anode. A relationship between electrokinetic mobility of arsenic and other elements and their extractability in sequential extraction tests was established, indicating that dissolution or desorption of the elements and thermodynamic conditions (pH and Eh gradient) played a bigger role in the electrokinetic removal process than electromigration of soluble ions.

Effect of Polarity Reversal on Hexachlorobenzene Removal during Electrokinetic Fenton Process

AbstractExperimental evidence shows that the electrokinetic Fenton process is very effective for cleaning soil contaminated with organic compounds, especially hydrophobic and persistent organic pollutants. Despite the technological progress in recent years, there are still several performance-related issues to be addressed, such as its implication on the final soil quality and different oxidant delivery schemes. This paper reports the results of a series of experiments carried out to explore the possibilities of using polarity reversal as an enhancement during electrokinetic Fenton treatment of soil contaminated with persistent organic pollutants. Laboratory-scale experiments were conducted with kaolin and hexachlorobenzene (HCB) as the model soil and contaminant, respectively. Experiments were performed both with and without added iron (Fe). Reversing the polarity of electrodes after a period during the experiments was found to be effective in aiding the reachability of the oxidant to the soil specimen i...