Pirjo Kortesuo

Silica xerogel as an implantable carrier for controlled drug delivery : evaluation of drug distribution and tissue effects after implantation

The purpose of the present study was to examine controlled delivery of toremifene citrate from subcutaneously implanted silica xerogel carrier and to evaluate silica xerogel related tissue effects after implantation. Toremifene citrate was incorporated into hydrolyzed silica sol in a room temperature process. Toremifene citrate treated silica xerogel implants were tested both in vitro and in vivo using healthy mice. Silica xerogel with tritium-labelled toremifene was implanted subcutaneously in mice for 42 d. To determine the amount of tritiated toremifene remaining in the silica discs at the implantation site, the discs were excised periodically and radioactivity measured. The amount of tritiated toremifene in the implant after 42 d was still about 16% and the amount of silica xerogel about 25%. In a histopathological study silica xerogel did not show any tissue irritation at the site of the implantation. A fibrotic capsule was formed around the implant. No silica xerogel related histological changes in liver, kidney, lymph nodes and uterus were observed during the implantation period. The silica xerogel discs showed a sustained release of toremifene citrate over 42 d. Histologically, toremifene-related changes in the uterus were also detectable at all studied time points. These findings suggest that silica xerogel is a promising carrier material for implantable controlled drug delivery system.

Silica xerogel carrier material for controlled release of toremifene citrate

Sol-gel processed silica xerogel was used as a carrier material for toremifene citrate in order to develop an implantable controlled release formulation which could be localised to a desired site providing targeted and long-lasting disease control and resulting in a reduced amount of drug needed. Toremifene citrate, an anti-estrogenic compound, was incorporated into silica xerogel matrixes during polycondensation of organic silicate, tetraethyl ortho silicate (TEOS). The effects of drug amount, drying temperature and polyethylene glycol (PEG) on the release rate of toremifene citrate and degradation of the silica xerogel matrixes were investigated. Addition of PEG (M(w) 4600/10000) decreased the specific surface area of the matrix and lowered the release rate of the drug. Reducing the amount of drug in the matrix also decreased the release rate of toremifene citrate. However, drying temperature did not affect the release rate of silica or toremifene citrate. The release profiles of toremifene citrate were according to zero order kinetics, suggesting that drug release was controlled by erosion of the silica xerogel matrix. These results suggest that the toremifene citrate release rate can be controlled to some extent by adding (PEG) or by varying the amount of drug in the silica xerogel matrix.

In vitro evaluation of sol–gel processed spray dried silica gel microspheres as carrier in controlled drug delivery

The objective of this study was to evaluate sol-gel-derived spray dried silica gel microspheres as carrier material for dexmedetomidine HCl and toremifene citrate. The drug was dissolved in sol-gel processed silica sol before spray drying with Büchi laboratory scale equipment. Microspheres with a low specific surface area were spherical by shape with a smooth surface without pores on the external surface. The particle size distribution was quite narrow. The in vitro release of toremifene citrate and dexmedetomidine HCl showed a dose-dependent burst followed by a slower release phase, that was proportional to the drug concentration in the concentration range between 3.9 and 15.4 wt.%. The release period for toremifene citrate was approximately 10 days and for dexmedetomidine HCl between 7 and 50 days depending on drug concentration. Spray drying is a promising way to produce spherical silica gel particles with a narrow particle size range for controlled delivery of toremifene citrate and dexmedetomidine HCl.

Sol‐gel‐processed sintered silica xerogel as a carrier in controlled drug delivery

Sol-gel-processed sintered silica xerogel was studied as a controllable, dissolvable, implantable material. The erosion of the matrix and the release of the preadsorbed drug toremifene citrate was investigated both in vitro and in vivo using mice. In an in vitro dissolution study, 50 to 60% of the drug was released after 24 h, according to the square root of time kinetics, and the weight loss of the silica was 24 wt %. Silica xerogel with tritium-labeled toremifene was implanted subcutaneously in mice for 56 days. To determine the amount of tritiated drug remaining in the silica disks at the implantation site, the disks were excised periodically and the radioactivity measured. About 40% of the radioactivity was released during the first 4 days and all of it within 28 days. Radioactivity also was measured in the liver, lungs, kidneys, uterus, and blood. The radioactivity reached a maximum level after 4 days in the liver, kidneys, and lungs and slowly decreased until all of the drug had been released from the matrix after 28 days. After release of the drug (28 days) the amount of remaining silica xerogel implant was 45 wt %, and at the end of the study (56 days) it was 24 wt %. In the histopathological study, sintered silica xerogel did not show any tissue toxicity at the site of the implantation, in the liver, or in the kidneys. It was concluded that sintered silica xerogel is a biocompatible and controllably resorbable material and therefore is a promising matrix for use in the sustained delivery of drugs.

In vitro release of dexmedetomidine from silica xerogel monoliths: effect of sol-gel synthesis parameters

Dexmedetomidine, an alpha 2-agonist, was incorporated as a hydrochloride salt into silica xerogel in order to evaluate the effect of sol-gel synthesis parameters: pH of the sol, water/alkoxide molar ratio, drug concentration and size of the device on the drug release rate and degradation rate of the matrix. This study showed that diffusion controlled the release of dexmedetomidine from silica xerogel prepared between pH 1 and pH 5. The drug release was, however, slowest near the zero charge of silica xerogel (pH 2-3). The burst of dexmedetomidine, a lipophilic, but in the form of hydrochloride salt water-soluble drug, was increased from the matrix prepared either below or above the isoelectric point. It follows that the optimum pH for preparing a drug delivery device for dexmedetomidine, is near the zero charge of silica xerogel, where the degradation of the matrix was also slowest. In addition to processing pH, the release rate of drugs can be controlled by changing the water/alkoxide molar ratio of the sol.

Alkyl-substituted silica gel as a carrier in the controlled release of dexmedetomidine.

The effect of alkyl substitution of the silica xerogel matrix on the release rate of dexmedetomidine was evaluated. Silica sol was processed by either casting or spray drying. When the reaction precursor tetraethylorthosilicate (TEOS) was partially substituted with tri- or dialkoxysilane, the release of dexmedetomidine and degradation of the matrix were decreased compared with 100% TEOS-based gel. Increasing the number or length of the organic groups attached to silicon, modified the silica gel structure and reduced the release rate of dexmedetomidine from monoliths. The release of dexmedetomidine from alkyl-substituted silica gel microparticles, however, showed a burst in drug release. Subcutaneously administered silica xerogel matrices (manufactured by casting, containing 25 mol% dimethyldiethoxysilane at two different doses of dexmedetomidine) were studied in dogs. Sustained delivery of dexmedetomidine was obtained for at least 48 h.

Effect of synthesis parameters of the sol-gel-processed spray-dried silica gel microparticles on the release rate of dexmedetomidine.

The objective of this study was to evaluate the possibilities to control the release rate of dexmedetomidine (DMED) from different spray-dried silica gel microparticle formulations. Microparticles were prepared by spray drying a silica sol polymer solution containing the drug. Drug release was investigated both in vitro and in vivo. The influence of sol-gel synthesis parameters, like pH and the water/alkoxide ratio (r) of the sol, on the release behaviour of the drug was studied. Silica gel microparticles had a smooth surface. Microparticles prepared from diluted sol, however, were more aggregated and clustered. The drug release conformed to zero order release from microparticles prepared near the isoelectric point of silica (pH 2.3 and pH 3) and to the square root of time kinetics from microparticles prepared at pH 1 and pH 5. The release also showed a dual-phasic profile with an initial burst and after that a slower release period. The dexmedetomidine release conformed to zero order kinetics from microparticles prepared at water/ alkoxide ratios between r = 6 and r = 35 (at pH 2.3). The release rate was the slowest from microparticles prepared with water/ alkoxide ratio 35. The bioavailability of dexmedetomidine in dogs showed that the release was sustained from silica gel microparticles as compared with a subcutaneously administered reference dose of 0.1 mg.

Drug release from biodegradable silica fibers

Abstract Sol–gel derived biodegradable SiO 2 gel fibers have been prepared and characterized by Raman spectroscopy, SEM, 29 Si MAS NMR and TG–MS, respectively. An active component, dexmedetomidine hydrochloride, was incorporated in situ into the fiber structure, by adding it to the sol used for fiber spinning. The subsequent release of the active component was studied in vitro and shown to be determined by differences in the fiber structure, for which clear but indirect evidence was obtained from the different characterization methods used.

In vitro evaluation of biodegradable ε-caprolactone-co-D,L-lactide/silica xerogel composites containing toremifene citrate

Abstract Poly(e-caprolactone-co- d,l -lactide) polymers were blended with toremifene citrate or with toremifene citrate impregnated silica xerogel in order to develop a controlled release formulation. The copolymers were synthesized by bulk polymerization and characterized by nuclear magnetic resonance, size exclusion chromatography and differential scanning calorimetry analyses. The in vitro release of toremifene citrate, an antiestrogenic compound, and silica was carried out in simulated body fluid (pH 7.4) containing 0.5 wt% sodium dodecylsulphate at 34°C. The in vitro release studies indicate that the release flux of toremifene citrate increases with increasing weight fraction of caprolactone in the copolymer. Silica xerogel had a minor enhancing effect on the release rate of toremifene citrate. Copolymers containing larger amounts of d,l -lactide (PLA–CL20 and PLA–CL40 copolymers) were not suitable matrices for the delivery of toremifene citrate in a controlled manner because of the burst effect. The fraction of toremifene citrate released from PLA–CL80 matrix increased with the increasing loading of toremifene citrate. The results of the study indicate that the in vitro release of toremifene citrate can be adjusted by varying the polymer composition and also the initial drug loading.

Effect of the molecular weight of poly(ε-caprolactone-co-dl-lactide) on toremifene citrate release from copolymer/silica xerogel composites

The purpose of this study was to develop a biodegradable polymeric carrier system for toremifene citrate based on epsilon-caprolactone/DL-lactide copolymers and silica xerogel. The effect of the molecular weight of poly(epsilon-caprolactone-co-DL-lactide) affecting the release rate of toremifene citrate from copolymer/silica xerogel composites was evaluated by in vitro dissolution study. Lower and higher molecular weight copolymers (LMW 60000 g/mol and HMW 300000 g/mol) were used in the devices. Drug release was compared from the (copolymer/drug) matrix device and the (copolymer/drug impregnated silica xerogel) composite device. Hydrolysis of the copolymer devices was evaluated by water absorption, weight loss and change of molecular weight by size exclusion measurements (SEC). Controlled release of toremifene citrate was obtained from both matrix and composite devices and the release rate was most affected by the initial molecular weight of the copolymer. Throughout the study better results were obtained with LMW devices, since drug release was steady for nearly 1 year and no changes in the release rate were observed. The drug release was diffusion controlled from both LMW matrix and composite devices. Incorporation of toremifene citrate into the silica xerogel was found to enhance the drug release rate. The copolymer matrices degraded by random hydrolytic chain scission and, unexpectedly, HMW P(CL/LA) degraded faster than LMW P(CL/LA). The release of toremifene citrate from HMW devices was not complete before the second stage of polymer degradation began.