Pratima R. Solanki

Iron oxide nanoparticles–chitosan composite based glucose biosensor

Iron oxide (Fe(3)O(4)) nanoparticles prepared using co-precipitation method have been dispersed in chitosan (CH) solution to fabricate nanocomposite film on indium-tin oxide (ITO) glass plate. Glucose oxidase (GOx) has been immobilized onto this CH-Fe(3)O(4) nanocomposite film via physical adsorption. The size of the Fe(3)O(4) nanoparticles estimated using X-ray diffraction (XRD) pattern and transmission electron microscopy (TEM) has been found to be approximately 22 nm. The CH-Fe(3)O(4) nanocomposite film and GOx/CH-Fe(3)O(4)/ITO bioelectrode have been characterized using UV-visible and Fourier transform infrared (FTIR) spectroscopic and scanning electron microscopy (SEM) techniques, respectively. This GOx/CH-Fe(3)O(4)/ITO nanocomposite bioelectrode has response time of 5s, linearity as 10-400 mgdL(-1) of glucose, sensitivity as 9.3 microA/(mgdLcm(2)) and shelf life of about 8 weeks under refrigerated conditions. The value of Michaelis-Menten (K(m)) constant obtained as 0.141 mM indicates high affinity of immobilized GOx towards the substrate (glucose).

Zinc oxide nanoparticles-chitosan composite film for cholesterol biosensor.

Zinc oxide nanoparticles (NanoZnO) uniformly dispersed in chitosan (CHIT) have been used to fabricate a hybrid nanocomposite film onto indium-tin-oxide (ITO) glass plate. Cholesterol oxidase (ChOx) has been immobilized onto this NanoZnO-CHIT composite film using physiosorption technique. Both NanoZnO-CHIT/ITO electrode and ChOx/NanoZnO-CHIT/ITO bioelectrode have been characterized using Fourier transform-infrared (FTIR), X-ray diffraction (XRD), cyclic voltammetry (CV), scanning electron microscopy (SEM) and electrochemical impedance spectroscopy (EIS) techniques, respectively. The ChOx/NanoZnO-CHIT/ITO bioelectrode exhibits linearity from 5 to 300 mg dl(-1) of cholesterol with detection limit as 5 mg dl(-1), sensitivity as 1.41x10(-4) A mg dl(-1) and the value of Michaelis-Menten constant (K(m)) as 8.63 mg dl(-1). This cholesterol biosensor can be used to estimate cholesterol in serum samples.

Recent advances in self-assembled monolayers based biomolecular electronic devices

Self-assembled monolayers (SAMs) have aroused much interest due to their potential applications in biosensors, biomolecular electronics and nanotechnology. This has been largely attributed to their inherent ordered arrangement and controllable properties. SAMs can be formed by chemisorption of organic molecules containing groups like thiols, disulphides, amines, acids or silanes, on desired surfaces and can be used to fabricate biomolecular electronic devices. We focus on recent applications of organosulphur compounds (thiols) based SAMs to biomolecular electronic devices in the last about 3 years.

Sol-gel derived nanostructured cerium oxide film for glucose sensor

Sol-gel derived nanostructured cerium oxide (CeO2) film deposited on gold (Au) electrode has been utilized for physisorption of glucose oxidase (GOx). X-ray diffraction, atomic force microscopy, UV-visible spectroscopy, and electrochemical techniques have been used to characterize sol-gel derived CeO2∕Au electrode and GOx∕CeO2∕Au bioelectrode. The response characteristics of the glucose bioelectrode (GOx∕CeO2∕Au) indicate linearity, detection limit and shelf-life as 50–400mg∕dL, 12.0μM, and 12weeks, respectively. The value of apparent Michaelis–Menten constant (Km) of GOx∕CeO2∕Au bioelectrode has been found to be 13.55μM.

Hydrogen peroxide sensor based on horseradish peroxidase immobilized nanostructured cerium oxide film

Nanostructured cerium oxide (NanoCeO(2)) film deposited onto indium-tin-oxide (ITO) glass substrate by solution casting has been used for immobilization of horseradish peroxidase (HRP) via physiosorption technique. X-ray diffraction (XRD), scanning electron microscopy (SEM), UV-vis and electrochemical techniques have been utilized for characterization of NanoCeO(2)/ITO electrode and HRP/NanoCeO(2)/ITO bioelectrode. The HRP/NanoCeO(2)/ITO electrode exhibits value of the apparent Michaelis-Menten constant (K(m)) as 2.21 microM, linear regression coefficient as 0.998 and linearity for hydrogen peroxide as 1.0-170 microM obtained using electrochemical response measurements. Besides this, HRP/NanoCeO(2)/ITO bioelectrode can be used about 20 times and is stable for 5 weeks at 4 degrees C. The results of photo-response studies carried out on HRP/NanoCeO(2)/ITO bioelectrode indicate reasonable agreement with those obtained using amperometric technique.

Application of octadecanethiol self-assembled monolayer to cholesterol biosensor based on surface plasmon resonance technique

Octadecanethiol (ODT) self-assembled monolayer (SAM) prepared onto gold-coated glass plate has been modified by using nitrene reaction of 1-fluoro-2-nitro-4-azidobenzene (FNAB) that further covalently binds to cholesterol oxidase (ChOx) via thermal reaction. FNAB acts as a bridge (cross-linker) between SAM and ChOx. The ChOx/FNAB/ODT/Au electrode thus fabricated has been characterized using contact angle (CA) measurements, UV-vis spectroscopy, electrochemical techniques and X-ray photoelectron spectroscopy (XPS) technique, respectively. This ChOx/FNAB/ODT/Au bioelectrode has been utilized for estimation of cholesterol in solution using surface plasmon resonance (SPR) technique. This SPR based cholesterol biosensor has linearity from 50 to 500mg/dl of cholesterol in solution with lower detection limit of 50mg/dl and shelf life of about 2 months when stored at 4 degrees C.

A nanostructured cerium oxide film-based immunosensor for mycotoxin detection

Rabbit-immunoglobulin antibodies (r-IgGs) and bovine serum albumin (BSA) have been immobilized onto sol-gel-derived nanostructured cerium oxide (nanoCeO(2)) film fabricated onto an indium-tin-oxide (ITO) coated glass plate to detect ochratoxin-A (OTA). Broad reflection planes obtained in x-ray diffraction (XRD) patterns reveal the formation of CeO(2) nanostructures. Electrochemical studies reveal that nanoCeO(2) particles provide an increased electroactive surface area for loading of r-IgGs with desired orientation, resulting in enhanced electron communication between r-IgGs and electrode. BSA/r-IgGs/nano CeO(2)/ITO immunoelectrode exhibits improved characteristics such as linear range (0.5-6 ng dl(-1)), low detection limit (0.25 ng dl(-1)), fast response time (30 s) and high sensitivity (1.27 microA ng(-1) dl(-1) cm(-2)). The high value of the association constant (K(a), 0.9 x 10(11) l mol(-1)) indicates the high affinity of the BSA/r-IgGs/nanoCeO(2)/ITO immunoelectrode to OTA.

Nanostructured zinc oxide platform for cholesterol sensor

Nanostructured zinc oxide (nano-ZnO) film has been fabricated onto indium tin oxide (ITO) containing preferred (002) plane and 10 nm crystallite size using sol-gel technique for immobilization of cholesterol oxidase (ChOx). Electrochemical response of ChOx/nano-ZnO/ITO bioelectrode determined as a function of cholesterol concentration using cyclic voltammetry technique reveals improved detection range (5–400 mg/dl), low detection limit (0.5 mg/dl), fast response time (10 s), sensitivity (0.059 μA/mg dl−1 cm−2), and low value (0.98 mg/dl) of Michaelis–Menten constant (Km). It is shown that nano-ZnO film provides better environment and enhanced electron transfer between ChOx and electrode.

Nanostructured zinc oxide platform for mycotoxin detection

Nanostructured zinc oxide (Nano-ZnO) film has been deposited onto indium-tin-oxide (ITO) glass plate for co-immobilization of rabbit-immunoglubin antibodies (r-IgGs) and bovine serum albumin (BSA) for ochratoxin-A (OTA) detection. The results of X-ray diffraction (XRD) studies reveal the formation of Nano-ZnO with average particle size as ~5.0nm. Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), electrochemical impedance spectroscopy (EIS) techniques have been used to characterize Nano-ZnO/ITO electrode and BSA/r-IgGs/Nano-ZnO/ITO immunoelectrode. Electrochemical impedimetric response of BSA/r-IgGs/Nano-ZnO/ITO immunoelectrode obtained as a function of OTA concentration exhibits linearity as 0.006-0.01nM/dm(3), detection limit of 0.006nM/dm(3), response time as 25s and sensitivity of 189Omega/nM/dm(3)cm(-2) with a regression coefficient of 0.997.

Zinc oxide-chitosan nanobiocomposite for urea sensor

Zinc oxide (ZnO)-chitosan (CH) nanobiocomposite film onto indium-tin-oxide (ITO) coated glass has been used to immobilize urease (Urs) and glutamate dehydrogenase (GLDH) for urea detection. The presence of ZnO nanoparticles in CH results in its increased surface area and enhanced electron transfer kinetics. The Urs-GLDH/CH-ZnO/ITO bioelectrode characterized using electrochemical, Fourier transform infrared, and scanning electron microscopy studies exhibit linearity of 5–100mg∕dl, detection limit of 3mg∕dl, response time of 10s, reproducibility as 20 times, and shelf life of 3months. The low Michaelis–Menten constant (Km) value (4.92mg∕dl) indicates enhanced affinity of enzyme with nanobiocomposite.