Qi Hang Qin

Electron‐Beam‐Induced Perovskite–Brownmillerite–Perovskite Structural Phase Transitions in Epitaxial La2/3Sr1/3MnO3 Films

Structural phase transitions driven by oxygen-vacancy ordering can drastically affect the properties of transition metal oxides. The focused electron beam of a transmission electron microscope (TEM) can be used to control structural phase transitions in epitaxial La2/3Sr1/3MnO3. The ability to induce and characterize oxygen-deficient structural phases simultaneously in a continuous and controllable manner opens up new pathways for atomic-scale studies of transition metal oxides and other complex materials.

Resistive Switching in All-Oxide Ferroelectric Tunnel Junctions with Ionic Interfaces

Universal, giant and nonvolatile resistive switching is demonstrated for oxide tunnel junctions with ferroelectric PbZr0.2 Ti0.8 O3 , ferroelectric BaTiO3, and paraelectric SrTiO3 tunnel barriers. The effects are caused by reversible migration of oxygen vacancies between the tunnel barrier and bottom La2/3 Sr1/3 MnO3 electrode. The switching process, which is driven by large electric fields, is efficient down to a temperature of 5 K.

Room-temperature perpendicular magnetic anisotropy of MgO/Fe/MgO ultrathin films

We used the anomalous Hall effect to study the magnetic properties of MgO/Fe(t)/MgO(001) structures in which the Fe thickness t ranged from 4 A to 14 A. For the iron deposited at 140 K, we obtained perpendicular magnetization at room temperature below the critical thickness of tc = (9 ± 1) A. In the vicinity of tc, the easy magnetization axis switched from an out-of-plane orientation to an in-plane orientation, and the observed spin-reorientation transition was considered in terms of the competition among different anisotropies. The perpendicular magnetization direction was attributed to magnetoelastic anisotropy. Finally, the temperature-dependent spin-reorientation transition was analyzed for Fe thicknesses close to tc.

Nanoscale control of competing interactions and geometrical frustration in a dipolar trident lattice

Geometrical frustration occurs when entities in a system, subject to given lattice constraints, are hindered to simultaneously minimize their local interactions. In magnetism, systems incorporating geometrical frustration are fascinating, as their behavior is not only hard to predict, but also leads to the emergence of exotic states of matter. Here, we provide a first look into an artificial frustrated system, the dipolar trident lattice, where the balance of competing interactions between nearest-neighbor magnetic moments can be directly controlled, thus allowing versatile tuning of geometrical frustration and manipulation of ground state configurations. Our findings not only provide the basis for future studies on the low-temperature physics of the dipolar trident lattice, but also demonstrate how this frustration-by-design concept can deliver magnetically frustrated metamaterials.Artificial magnetic nanostructures enable the study of competing frustrated interactions with more control over the system parameters than is possible in magnetic materials. Farhan et al. present a two-dimensional lattice geometry where the frustration can be controlled by tuning the unit cell parameters.

A Novel Porous Tube Reactor for Nanoparticle Synthesis with Simultaneous Gas-Phase Reaction and Dilution

A novel porous tube reactor that combines simultaneous reactions and continuous dilution in a single-stage gas-phase process was designed for nanoparticle synthesis. The design is based on the atmospheric pressure chemical vapor synthesis (APCVS) method. In comparison to the conventional hot wall chemical vapor synthesis reactor, the APCVS method offers an effective process for the synthesis of ultrafine metal particles with controlled oxidation. In this study, magnetic iron and maghemite were synthesized using iron pentacarbonyl as a precursor. Morphology, size, and magnetic properties of the synthesized nanoparticles were determined. The X-ray diffraction results show that the porous tube reactor produced nearly pure iron or maghemite nanoparticles with crystallite sizes of 24 and 29 nm, respectively. According to the scanning mobility particle sizer data, the geometric number mean diameter was 110 nm for iron and 150 nm for the maghemite agglomerates. The saturation magnetization value of iron was 150 emu/g and that of maghemite was 12 emu/g, measured with superconducting quantum interference device (SQUID) magnetometry. A computational fluid dynamics (CFD) simulation was used to model the temperature and flow fields and the decomposition of the precursor as well as the mixing of the precursor vapor and the reaction gas in the reactor. An in-house CFD model was used to predict the extent of nucleation, coagulation, sintering, and agglomeration of the iron nanoparticles. CFD simulations predicted a primary particle size of 36 nm and an agglomerate size of 134 nm for the iron nanoparticles, which agreed well with the experimental data. Copyright 2015 American Association for Aerosol Research

Author Correction: Nanoscale control of competing interactions and geometrical frustration in a dipolar trident lattice

The original version of this article contained an error in the legend to Figure 4. The yellow scale bar should have been defined as ‘~600 nm’, not ‘~600 µm’. This has now been corrected in both the PDF and HTML versions of the article.

Giant resistive switching effects in symmetric all-oxide tunnel junctions with La 2/3 Sr 1/3 MnO 3 electrodes

This study demonstrates the switching behavior of nominally symmetric tunnel junctions that are comprised of two La_2/3Sr_1/3MnO₃ electrodes separated by a ferroelectric PbZr_0.2Ti_0.8O₃ or BaTiO₃ tunnel barrier, or a paraelectric SrTiO₃ tunnel barrier. Transmission electron microscopy measurements indicate that the structural and chemical symmetry of the junctions is broken at the tunnel barrier interfaces. Electrical transport measurements are preformed on Hall bar structures by scanning probe microscopy.