Qianfan Zhang

Amphiphilic Surface Modification of Hollow Carbon Nanofibers for Improved Cycle Life of Lithium Sulfur Batteries

Tremendous effort has been put into developing viable lithium sulfur batteries, due to their high specific energy and relatively low cost. Despite recent progress in addressing the various problems of sulfur cathodes, lithium sulfur batteries still exhibit significant capacity decay over cycling. Herein, we identify a new capacity fading mechanism of the sulfur cathodes, relating to Li(x)S detachment from the carbon surface during the discharge process. This observation is confirmed by ex-situ transmission electron microscopy study and first-principles calculations. We demonstrate that this capacity fading mechanism can be overcome by introducing amphiphilic polymers to modify the carbon surface, rendering strong interactions between the nonpolar carbon and the polar Li(x)S clusters. The modified sulfur cathode show excellent cycling performance with specific capacity close to 1180 mAh/g at C/5 current rate. Capacity retention of 80% is achieved over 300 cycles at C/2.

Designing high-energy lithium–sulfur batteries

Due to their high energy density and low material cost, lithium-sulfur batteries represent a promising energy storage system for a multitude of emerging applications, ranging from stationary grid storage to mobile electric vehicles. This review aims to summarize major developments in the field of lithium-sulfur batteries, starting from an overview of their electrochemistry, technical challenges and potential solutions, along with some theoretical calculation results to advance our understanding of the material interactions involved. Next, we examine the most extensively-used design strategy: encapsulation of sulfur cathodes in carbon host materials. Other emerging host materials, such as polymeric and inorganic materials, are discussed as well. This is followed by a survey of novel battery configurations, including the use of lithium sulfide cathodes and lithium polysulfide catholytes, as well as recent burgeoning efforts in the modification of separators and protection of lithium metal anodes. Finally, we conclude with an outlook section to offer some insight on the future directions and prospects of lithium-sulfur batteries.

Understanding the Role of Different Conductive Polymers in Improving the Nanostructured Sulfur Cathode Performance

Lithium sulfur batteries have brought significant advancement to the current state-of-art battery technologies because of their high theoretical specific energy, but their wide-scale implementation has been impeded by a series of challenges, especially the dissolution of intermediate polysulfides species into the electrolyte. Conductive polymers in combination with nanostructured sulfur have attracted great interest as promising matrices for the confinement of lithium polysulfides. However, the roles of different conductive polymers on the electrochemical performances of sulfur electrode remain elusive and poorly understood due to the vastly different structural configurations of conductive polymer-sulfur composites employed in previous studies. In this work, we systematically investigate the influence of different conductive polymers on the sulfur cathode based on conductive polymer-coated hollow sulfur nanospheres with high uniformity. Three of the most well-known conductive polymers, polyaniline (PANI), polypyrrole (PPY), and poly(3,4-ethylenedioxythiophene) (PEDOT), were coated, respectively, onto monodisperse hollow sulfur nanopsheres through a facile, versatile, and scalable polymerization process. The sulfur cathodes made from these well-defined sulfur nanoparticles act as ideal platforms to study and compare how coating thickness, chemical bonding, and the conductivity of the polymers affected the sulfur cathode performances from both experimental observations and theoretical simulations. We found that the capability of these three polymers in improving long-term cycling stability and high-rate performance of the sulfur cathode decreased in the order of PEDOT > PPY > PANI. High specific capacities and excellent cycle life were demonstrated for sulfur cathodes made from these conductive polymer-coated hollow sulfur nanospheres.

Understanding the Anchoring Effect of Two-Dimensional Layered Materials for Lithium–Sulfur Batteries

Although the rechargeable lithium-sulfur battery system has attracted significant attention due to its high theoretical specific energy, its implementation has been impeded by multiple challenges, especially the dissolution of intermediate lithium polysulfide (Li2Sn) species into the electrolyte. Introducing anchoring materials, which can induce strong binding interaction with Li2Sn species, has been demonstrated as an effective way to overcome this problem and achieve long-term cycling stability and high-rate performance. The interaction between Li2Sn species and anchoring materials should be studied at the atomic level in order to understand the mechanism behind the anchoring effect and to identify ideal anchoring materials to further improve the performance of Li-S batteries. Using first-principles approach with van der Waals interaction included, we systematically investigate the adsorption of Li2Sn species on various two-dimensional layered materials (oxides, sulfides, and chlorides) and study the detailed interaction and electronic structure, including binding strength, configuration distortion, and charge transfer. We gain insight into how van der Waals interaction and chemical binding contribute to the adsorption of Li2Sn species for anchoring materials with strong, medium, and weak interactions. We understand why the anchoring materials can avoid the detachment of Li2S as in carbon substrate, and we discover that too strong binding strength can cause decomposition of Li2Sn species.

Two-dimensional layered transition metal disulphides for effective encapsulation of high-capacity lithium sulphide cathodes

Fully lithiated lithium sulphide (Li2S) is currently being explored as a promising cathode material for emerging energy storage applications. Like their sulphur counterparts, Li2S cathodes require effective encapsulation to reduce the dissolution of intermediate lithium polysulphide (Li2Sn, n=4-8) species into the electrolyte. Here we report, the encapsulation of Li2S cathodes using two-dimensional layered transition metal disulphides that possess a combination of high conductivity and strong binding with Li2S/Li2Sn species. In particular, using titanium disulphide as an encapsulation material, we demonstrate a high specific capacity of 503 mAh g(-1)(Li2S) under high C-rate conditions (4C) as well as high areal capacity of 3.0 mAh cm(-2) under high mass-loading conditions (5.3 mg(Li2S) cm(-2)). This work opens up the new prospect of using transition metal disulphides instead of conventional carbon-based materials for effective encapsulation of high-capacity electrode materials.

Ambipolar field effect in the ternary topological insulator (BixSb1-x)2Te3 by composition tuning

Topological insulators exhibit a bulk energy gap and spin-polarized surface states that lead to unique electronic properties, with potential applications in spintronics and quantum information processing. However, transport measurements have typically been dominated by residual bulk charge carriers originating from crystal defects or environmental doping, and these mask the contribution of surface carriers to charge transport in these materials. Controlling bulk carriers in current topological insulator materials, such as the binary sesquichalcogenides Bi2Te3, Sb2Te3 and Bi2Se3, has been explored extensively by means of material doping and electrical gating, but limited progress has been made to achieve nanostructures with low bulk conductivity for electronic device applications. Here we demonstrate that the ternary sesquichalcogenide (Bi(x)Sb(1-x))2Te3 is a tunable topological insulator system. By tuning the ratio of bismuth to antimony, we are able to reduce the bulk carrier density by over two orders of magnitude, while maintaining the topological insulator properties. As a result, we observe a clear ambipolar gating effect in (Bi(x)Sb(1-x))2Te3 nanoplate field-effect transistor devices, similar to that observed in graphene field-effect transistor devices. The manipulation of carrier type and density in topological insulator nanostructures demonstrated here paves the way for the implementation of topological insulators in nanoelectronics and spintronics.

Lithium Insertion In Silicon Nanowires: An ab Initio Study

The ultrahigh specific lithium ion storage capacity of Si nanowires (SiNWs) has been demonstrated recently and has opened up exciting opportunities for energy storage. However, a systematic theoretical study on lithium insertion in SiNWs remains a challenge, and as a result, understanding of the fundamental interaction and microscopic dynamics during lithium insertion is still lacking. This paper focuses on the study of single Li atom insertion into SiNWs with different sizes and axis orientations by using full ab initio calculations. We show that the binding energy of interstitial Li increases as the SiNW diameter grows. The binding energies at different insertion sites, which can be classified as surface, intermediate, and core sites, are quite different. We find that surface sites are energetically the most favorable insertion positions and that intermediate sites are the most unfavorable insertion positions. Compared with the other growth directions, the [110] SiNWs with different diameters always present the highest binding energies on various insertion locations, which indicates that [110] SiNWs are more favorable by Li doping. Furthermore, we study Li diffusion inside SiNWs. The results show that the Li surface diffusion has a much higher chance to occur than the surface to core diffusion, which is consistent with the experimental observation that the Li insertion in SiNWs is layer by layer from surface to inner region. After overcoming a large barrier crossing surface-to-intermediate region, the diffusion toward center has a higher possibility to occur than the inverse process.

Facile synthesis of Li2S–polypyrrole composite structures for high-performance Li2S cathodes

Li2S is an attractive prelithiated cathode material with a high theoretical capacity of 1166 mA h g−1, which is far above that of its transition metal oxide/phosphate counterparts. Here, we demonstrate facile, in situ synthesis of Li2S–polypyrrole composites for use as high-performance Li2S cathodes. The N atoms in polypyrrole were found to possess favorable Li–N interaction with Li2S, which enables polypyrrole to bind strongly onto and cover the surface of Li2S to constrain intermediate polysulfides during cycling. Polypyrrole, being a conducting polymer, also helps to facilitate electronic conduction. Using the Li2S–polypyrrole composites as a cathode material, we demonstrate a high discharge capacity of 785 mA h g−1 of Li2S (∼1126 mA h g−1 of S) with stable cycling over prolonged 400 charge/discharge cycles.

First principles study of lithium insertion in bulk silicon

Si is an important anode material for the next generation of Li ion batteries. Here the energetics and dynamics of Li atoms in bulk Si have been studied at different Li concentrations on the basis of first principles calculations. It is found that Li prefers to occupy an interstitial site as a shallow donor rather than a substitutional site. The most stable position is the tetrahedral (T(d)) site. The diffusion of a Li atom in the Si lattice is through a T(d)-Hex-T(d) trajectory, where the Hex site is the hexagonal transition site with an energy barrier of 0.58 eV. We have also systematically studied the local structural transition of a Li(x)Si alloy with x varying from 0 to 0.25. At low doping concentration (x = 0-0.125), Li atoms prefer to be separated from each other, resulting in a homogeneous doping distribution. Starting from x = 0.125, Li atoms tend to form clusters induced by a lattice distortion with frequent breaking and reforming of Si-Si bonds. When x ≥ 0.1875, Li atoms will break some Si-Si bonds permanently, which results in dangling bonds. These dangling bonds create negatively charged zones, which is the main driving force for Li atom clustering at high doping concentration.

Catalytic oxidation of Li2S on the surface of metal sulfides for Li-S batteries

Significance A series of metal sulfides were systematically investigated as polar hosts to reveal the key parameters correlated to the energy barriers and polysulfide adsorption capability in Li−S batteries. The investigation demonstrates that the catalyzing oxidation capability of metal sulfides is critical in reducing the energy barrier and contributing to the remarkably improved battery performance. Density functional theory simulation allows us to identify the mechanism for how binding energy and polysulfides trapping dominate the Li2S decomposition process and overall battery performance. The understanding can serve as a general guiding principle for the rational design and screening of advanced materials for high-energy Li−S batteries. Polysulfide binding and trapping to prevent dissolution into the electrolyte by a variety of materials has been well studied in Li−S batteries. Here we discover that some of those materials can play an important role as an activation catalyst to facilitate oxidation of the discharge product, Li2S, back to the charge product, sulfur. Combining theoretical calculations and experimental design, we select a series of metal sulfides as a model system to identify the key parameters in determining the energy barrier for Li2S oxidation and polysulfide adsorption. We demonstrate that the Li2S decomposition energy barrier is associated with the binding between isolated Li ions and the sulfur in sulfides; this is the main reason that sulfide materials can induce lower overpotential compared with commonly used carbon materials. Fundamental understanding of this reaction process is a crucial step toward rational design and screening of materials to achieve high reversible capacity and long cycle life in Li−S batteries.