Qianrong Fang

Efficient water oxidation using nanostructured α-nickel-hydroxide as an electrocatalyst.

Electrochemical water splitting is a clean technology that can store the intermittent renewable wind and solar energy in H2 fuels. However, large-scale H2 production is greatly hindered by the sluggish oxygen evolution reaction (OER) kinetics at the anode of a water electrolyzer. Although many OER electrocatalysts have been developed to negotiate this difficult reaction, substantial progresses in the design of cheap, robust, and efficient catalysts are still required and have been considered a huge challenge. Herein, we report the simple synthesis and use of α-Ni(OH)2 nanocrystals as a remarkably active and stable OER catalyst in alkaline media. We found the highly nanostructured α-Ni(OH)2 catalyst afforded a current density of 10 mA cm(-2) at a small overpotential of a mere 0.331 V and a small Tafel slope of ~42 mV/decade, comparing favorably with the state-of-the-art RuO2 catalyst. This α-Ni(OH)2 catalyst also presents outstanding durability under harsh OER cycling conditions, and its stability is much better than that of RuO2. Additionally, by comparing the performance of α-Ni(OH)2 with two kinds of β-Ni(OH)2, all synthesized in the same system, we experimentally demonstrate that α-Ni(OH)2 effects more efficient OER catalysis. These results suggest the possibility for the development of effective and robust OER electrocatalysts by using cheap and easily prepared α-Ni(OH)2 to replace the expensive commercial catalysts such as RuO2 or IrO2.

3D microporous base-functionalized covalent organic frameworks for size-selective catalysis.

The design and synthesis of 3D covalent organic frameworks (COFs) have been considered a challenge, and the demonstrated applications of 3D COFs have so far been limited to gas adsorption. Herein we describe the design and synthesis of two new 3D microporous base-functionalized COFs, termed BF-COF-1 and BF-COF-2, by the use of a tetrahedral alkyl amine, 1,3,5,7-tetraaminoadamantane (TAA), combined with 1,3,5-triformylbenzene (TFB) or triformylphloroglucinol (TFP). As catalysts, both BF-COFs showed remarkable conversion (96% for BF-COF-1 and 98% for BF-COF-2), high size selectivity, and good recyclability in base-catalyzed Knoevenagel condensation reactions. This study suggests that porous functionalized 3D COFs could be a promising new class of shape-selective catalysts.

3D Porous Crystalline Polyimide Covalent Organic Frameworks for Drug Delivery

Three-dimensional porous crystalline polyimide covalent organic frameworks (termed PI-COFs) have been synthesized. These PI-COFs feature non- or interpenetrated structures that can be obtained by choosing tetrahedral building units of different sizes. Both PI-COFs show high thermal stability (>450 °C) and surface area (up to 2403 m(2) g(-1)). They also show high loading and good release control for drug delivery applications.

Designed synthesis of large-pore crystalline polyimide covalent organic frameworks

Covalent organic frameworks (COFs) are an emerging class of porous crystalline polymers with a wide variety of applications. They are currently synthesized through only a few chemical reactions, limiting the access and exploitation of new structures and properties. Here we report that the imidization reaction can be used to prepare a series of polyimide (PI) COFs with pore size as large as 42 × 53 Å(2), which is among the largest reported to date, and surface area as high as 2,346 m(2) g(-1), which exceeds that of all amorphous porous PIs and is among the highest reported for two-dimensional COFs. These PI COFs are thermally stable up to 530 °C. We also assemble a large dye molecule into a COF that shows sensitive temperature-dependent luminescent properties.

Nonaqueous redox-flow batteries: organic solvents, supporting electrolytes, and redox pairs

As members of the redox-flow battery (RFB) family, nonaqueous RFBs can offer a wide range of working temperature, high cell voltage, and potentially high energy density. These key features make nonaqueous RFBs an important complement of aqueous RFBs, broadening the spectrum of RFB applications. The development of nonaqueous RFBs is still at its early research stage and great challenges remain to be addressed before their successful use for practical applications. As such, it is essential to understand the major components in order to advance the nonaqueous RFB technology. In this perspective, three key major components of nonaqueous RFBs: organic solvents, supporting electrolytes, and redox pairs are selectively focused and discussed, with emphasis on providing an overview of those components and on highlighting the relationship between structure and properties. Urgent challenges are also discussed. To advance nonaqueous RFBs, the understanding of both components and systems is critically needed and it calls for inter-disciplinary collaborations across expertise including electrochemistry, organic chemistry, physical chemistry, cell design, and system engineering. In order to demonstrate the key features of nonaqueous RFBs, herein we also present an example of designing a 4.5 V ultrahigh-voltage nonaqueous RFB by combining a BP/BP˙− redox pair and an OFN˙+/OFN redox pair.

Non-precious metal electrocatalysts with high activity for hydrogen oxidation reaction in alkaline electrolytes

A ternary metallic CoNiMo catalyst is electrochemically deposited on a polycrystalline gold (Au) disk electrode using pulse voltammetry, and characterized for hydrogen oxidation reaction (HOR) activity by temperature-controlled rotating disk electrode measurements in 0.1 M potassium hydroxide (KOH). The catalyst exhibits the highest HOR activity among all non-precious metal catalysts (e.g., 20 fold higher than Ni). At a sufficient loading, the CoNiMo catalyst is expected to outperform Pt and thus provides a promising low cost pathway for alkaline or alkaline membrane fuel cells. Density functional theory (DFT) calculations and parallel H2-temperature programmed desorption (TPD) experiments on structurally much simpler model alloy systems show a trend that CoNiMo has a hydrogen binding energy (HBE) similar to Pt and much lower than Ni, suggesting that the formation of multi-metallic bonds modifies the HBE of Ni and is likely a significant contributing factor for the enhanced HOR activity.

Porous ZnCo2O4 nanoparticles derived from a new mixed-metal organic framework for supercapacitors

Cobalt-based oxides have been shown to be promising materials for application in high-energy-density Li-ion batteries and supercapacitors. In this paper, we report a new and simple strategy for the synthesis of a mixed-metal spinel phase (ZnCo2O4) from a zinc and cobalt mixed-metal organic framework (JUC-155). It is important to rationally design a MOF with a precise ratio (Co/Zn) and a synthetic process that is simple and time saving. After solid-state annealing of the mixed-metal MOF precursor at 400 °C for two hours, a pure ZnCo2O4 phase with a high surface area (55 cm2 g−1) was obtained. When used as electrode materials for supercapacitors, an exceptionally high specific capacitance of 451 F g−1 was obtained at the scan rate of 5 mV s−1. The capacitance loss after 1500 cycles was only 2.1% at a current density of 2 A g−1, indicating that this phase has an excellent cycling stability. These remarkable electrochemical performances suggest that this phase is potentially promising for application as an efficient electrode in electrochemical capacitors.

Permethyl Cobaltocenium (Cp*2Co+) as an Ultra-Stable Cation for Polymer Hydroxide-Exchange Membranes.

Hydroxide (OH−)-exchange membranes (HEMs) are important polymer electrolytes enabling the use of affordable and earth-abundant electrocatalysts for electrochemical energy-conversion devices such as HEM fuel cells, HEM electrolyzers, and HEM solar hydrogen generators. Many HEM cations exist, featuring desirable properties, but new cations are still needed to increase chemical stability at elevated temperatures. Here we introduce the permethyl cobaltocenium [(C5Me5)2Co(III)+ or Cp*2Co+] as an ultra-stable organic cation for polymer HEMs. Compared with the parent cobaltocenium [(C5H5)2Co(III)+ or Cp2Co+], Cp*2Co+ has substantially higher stability and basicity. With polysulfone as an example, we demonstrated the feasibility of covalently linking Cp*2Co+ cation to polymer backbone and prepared Cp*2Co+-functionalized membranes as well. The new cation may be useful in designing more durable HEM electrochemical devices.

A chiral layered Co(II) coordination polymer with helical chains from achiral materials

A layered coordination polymer Co(PDC)(H2O)2.H2O containing two helical chains was synthesized, and the resultant crystals were not racemic as evidenced by the observation of strong signals in vibrational circular dichroism (VCD) spectra.

Porous coordination polymers with zeolite topologies constructed from 4-connected building units

Two novel 3D coordination polymers, Cd(CTC)(H2O).(H2PIP)(0.5)(H2O) (1) with zeolite ABW topology and Cd(CTC).(HIPA) (2) with zeolite BCT topology, have been synthesized by constructing inorganic and organic 4-connected building units and using the organic bases as templates, and the frameworks of and not only expand the original structures of zeolites ABW and BCT, but also exhibit significant advantages over them in terms of thermal stability, ion exchange and adsorption.