Qingji Xie

Recent advances in electrochemical glucose biosensors: a review

Glucose detection is of great significance in biomedical applications. Principles, methods and recent developments in electrochemical glucose sensors are reviewed here. Special attention is given to the discussion on some problems and bottlenecks in areas of nonenzymatic and enzymatic (glucose oxidase-based) amperometric glucose sensing.

Synthesis of Ultrathin Nitrogen-Doped Graphitic Carbon Nanocages as Advanced Electrode Materials for Supercapacitor

Synthesis of nitrogen-doped carbons with large surface area, high conductivity, and suitable pore size distribution is highly desirable for high-performance supercapacitor applications. Here, we report a novel protocol for template synthesis of ultrathin nitrogen-doped graphitic carbon nanocages (CNCs) derived from polyaniline (PANI) and their excellent capacitive properties. The synthesis of CNCs involves one-pot hydrothermal synthesis of Mn3O4@PANI core-shell nanoparticles, carbonization to produce carbon coated MnO nanoparticles, and then removal of the MnO cores by acidic treatment. The CNCs prepared at an optimum carbonization temperature of 800 °C (CNCs-800) have regular frameworks, moderate graphitization, high specific surface area, good mesoporosity, and appropriate N doping. The CNCs-800 show high specific capacitance (248 F g(-1) at 1.0 A g(-1)), excellent rate capability (88% and 76% capacitance retention at 10 and 100 A g(-1), respectively), and outstanding cycling stability (~95% capacitance retention after 5000 cycles) in 6 M KOH aqueous solution. The CNCs-800 can also exhibit great pseudocapacitance in 0.5 M H2SO4 aqueous solution besides the large electrochemical double-layer capacitance. The excellent capacitance performance coupled with the facile synthesis of ultrathin nitrogen-doped graphitic CNCs indicates their great application potential in supercapacitors.

Electrochemical Synthesis of Carbon Nanodots Directly from Alcohols

Carbon nanodots (C-dots) show great potential as an important material for biochemical sensing, energy conversion, photocatalysis, and optoelectronics because of their water solubility, chemical inertness, low toxicity, and photo- and electronic properties. Numerous methods have been proposed for the preparation of C-dots. However, complex procedures and strong acid treatments are often required, and the as-prepared C-dots tend to be of low quality, and in particular, have a low efficiency for photoluminescence. Herein, a facile and general strategy involving the electrochemical carbonization of low-molecular-weight alcohols is proposed. As precursors, the alcohols transited into carbon-containing particles after electrochemical carbonization under basic conditions. The resultant C-dots exhibit excellent excitation- and size-dependent fluorescence without the need for complicated purification and passivation procedures. The sizes of the as-prepared C-dots can be adjusted by varying the applied potential. High-quality C-dots are prepared successfully from different small molecular alcohols, suggesting that this research provides a new, highly universal method for the preparation of fluorescent C-dots. In addition, luminescence microscopy of the C-dots is demonstrated in human cancer cells. The results indicate that the as-prepared C-dots have low toxicity and can be used in imaging applications.

Synthesis and oxygen reduction properties of three-dimensional sulfur-doped graphene networks.

Novel three-dimensional sulfur-doped graphene networks were synthesized using an ion-exchange/activation combination method using a 732-type sulfonic acid ion exchange resin as the carbon precursor, which showed high electrocatalytic activity, good stability and excellent methanol tolerance for four-electron oxygen reduction in alkaline solution.

A third-generation hydrogen peroxide biosensor based on horseradish peroxidase immobilized in a tetrathiafulvalene-tetracyanoquinodimethane/multiwalled carbon nanotubes film.

A new third-generation biosensor for H(2)O(2) assay was developed on the basis of the immobilization of horseradish peroxidase (HRP) in a nanocomposite film of tetrathiafulvalene-tetracyanoquinodimethane (TTF-TCNQ)/multiwalled carbon nanotubes (MWCNTs) modified gold electrode. The prepared HRP/TTF-TCNQ/MWCNTs/Au electrode was used for the bioelectrocatalytic reduction of H(2)O(2), with a linear range from 0.005 to 1.05 mM and a detection limit of 0.5 microM for amperometric sensing of H(2)O(2). In addition, a novel method on the basis of electrochemical quartz crystal microbalance (EQCM) measurements was proposed to determine the effective enzymatic specific activity (ESA) of the immobilized HRP for the first time, and the ESA was found to be greater at the TTF-TCNQ/MWCNTs/Au electrode than that at the MWCNTs/Au or TTF-TCNQ/Au electrode, indicating that the TTF-TCNQ/MWCNTs film is a good HRP-immobilization matrix to achieve the direct electron transfer between the enzyme and the electrode.

Carbon nanotube-based label-free electrochemical biosensor for sensitive detection of miRNA-24

The recent findings concerning the function of microRNAs (miRNAs) and the relationship between miRNA levels with specific disease highlight the need for miRNA detection. In this work, multi-walled carbon nanotubes (MWCNTs), having shown great potential for biosensors, were used to develop a simple, label-free, and sensitive electrochemical biosensor for detection of miRNA-24 by monitoring the oxidation signal of guanine. The synthetic DNA probes, being complementary with miRNA-24, were immobilized onto the surface of MWCNT-modified glass carbon electrodes by covalent cross-linking. The probes were hybridized with different concentrations of miRNA-24. The formed hybrids on the electrode surface were evaluated by differential pulse voltammetry. The change of guanine oxidation signal was observed as a result of the hybridization between the probes and miRNA-24. Control experiments using the non-complementary miRNA-29 were performed to evaluate the selectivity. Numerous factors affecting probe immobilization, target hybridization, and nonspecific binding events were optimized. Under the optimal conditions, the proposed miRNA-24 biosensor exhibits good sensitivity (4.963 μA cm(-2) decade(-1)), low detection limit (1 pM), and good selectivity and reproducibility. The biosensor also has acceptable recovery for miRNA-24 detection in complex miRNA sample.

Improved GFP gene transfection mediated by polyamidoamine dendrimer-functionalized multi-walled carbon nanotubes with high biocompatibility

The multi-walled carbon nanotubes (MWCNTs)-polyamidoamine (PAMAM) hybrid was prepared by covalent linkage approach, and characterized by transmission electron microscopy, Fourier transform infrared spectroscopy and ultraviolet-visible spectrometry. The PAMAM dendrimers were present on the surface of MWCNTs in high density, and the MWCNT-PAMAM hybrid exhibited good dispersibility and stability in aqueous solution. The interaction between MWCNT-PAMAM with plasmid DNA of enhanced green fluorescence protein (pEGFP-N1), intracellular trafficking of the hybrid, transfection performance and cytotoxicity to HeLa cells were evaluated in detail. We found that the MWCNT-PAMAM hybrid possessed good pEGFP-N1 immobilization ability and could efficiently delivery GFP gene into cultured HeLa cells. The surface modification of MWCNTs with PAMAM improved the transfection efficiency 2.4 and 0.9 times, and simultaneously decreased cytotoxicity by about 38%, as compared with mixed acid-treated MWCNTs and pure PAMAM dendrimers. The MWCNT-PAMAM hybrid can be considered as a new carrier for the delivery of biomolecules into mammalian cells. Therefore, this novel system may have good potential applications in biology and therapy, including gene delivery systems.

Exploiting metal-organic coordination polymers as highly efficient immobilization matrixes of enzymes for sensitive electrochemical biosensing.

We report on the exploitation of metal-organic coordination polymers (MOCPs) as new and efficient matrixes to immobilize enzymes for amperometric biosensing of glucose or phenols. A ligand, 2,5-dimercapto-1,3,4-thiadiazole (DMcT), two metallic salts, NaAuCl(4) and Na(2)PtCl(6), and two enzymes, glucose oxidase (GOx) and tyrosinase, are used to demonstrate the novel concept. Briefly, one of the metallic salts is added into an aqueous suspension containing DMcT and one of the enzymes to trigger the metal-organic coordination reaction, and the yielded MOCPs-enzyme biocomposite (MEBC) is then cast-coated on an Au electrode for biosensing. The aqueous-phase coordination polymerization reactions of the metallic ions with DMcT are studied by visual inspection as well as some spectroscopic, microscopic, and electrochemical methods. The thus-prepared glucose and phenolic biosensors perform better in analytical performance (such as sensitivity and limit of detection) than those prepared by the conventional chemical and/or electrochemical polymerization methods and most of the reported analogous biosensors, as a result of the improved enzyme load/activity and mass-transfer efficiency after using the MOCPs materials with high adsorption/encapsulation capability and unique porous structure. For instance, the detection limit for catechol is as low as 0.2 nM here, being order(s) lower than those of most of the reported analogues. The enzyme electrode was also used to determine catachol in real samples with satisfactory results. The emerging MOCPs materials and the suggested aqueous-phase preparation strategy may find wide applications in the fields of bioanalysis, biocatalysis, and environmental monitoring.

A novel dual-impedance-analysis EQCM system--investigation of bovine serum albumin adsorption on gold and platinum electrode surfaces.

Both quartz crystal micro-balance (QCM) impedance and electrochemical impedance spectroscopy (EIS) methods are widely used in interface studies. This paper presents details about a new strategy for simultaneous, mutual-interference-free and accurate measurements of QCM impedance and EI, through connecting a suitable capacitance in series with the piezoelectric quartz crystal (PQC) between QCM impedance and EIS measurement instruments. Combined and individual measurements of QCM impedance and EIS during silver deposition gave results comparable with each other, demonstrating the reliability of the proposed method. Bovine serum albumin (BSA) adsorption on gold and platinum electrodes in Britton-Robinson (B-R) buffers was investigated, and the Fe(CN)6(3-)/Fe(CN)6(4-) couple was used as an electrochemical probe to characterize BSA adsorption. While the reversibility of Fe(CN)6(3-)/Fe(CN)6(4-) couple on bare Au and Pt electrodes changed very slightly with decreasing solution pH from pH approximately 7 to pH approximately 2, the standard rate constant (ks) of this couple increased abruptly with solution pH below pH approximately 4.5 at a BSA-modified Au electrode, but decreased with solution pH at a BSA-modified Pt electrode. By analyzing the QCM impedance data with a modified BVD equivalent circuit and the EI data with a modified Randles equivalent circuit, inflexion changes at pH approximately 4.5 were all found at pH-dependent responses of the resonant frequency, the double-layer capacitance, the capacitance of the adsorbed BSA layer, the peak-absorbance values of BSA solutions at 277.5 and 224.5 nm, and so on. It was also found that a BSA adsorption layer can effectively inhibit gold corrosion during ferrocyanide oxidation in a ferrocyanide-containing BR solution. Some preliminary explanations of these findings have been given. The proposed method is highly recommended for wider applications in surface science.

In vitro study on the individual and synergistic cytotoxicity of adriamycin and selenium nanoparticles against Bel7402 cells with a quartz crystal microbalance.

Selenium nanoparticles (Se NPs) were prepared based on the reduction of selenious acid (H(2)SeO(3)), by employing sodium alginate (SA) as a template. The real-time monitoring of the drug-inducing apoptosis process of human hepatic cancer cells Bel7402 was performed with the quartz crystal microbalance (QCM) measurement. The anti-tumor effect of adriamycin (ADM) used in combination with Se NPs was investigated. It is found that both drugs were able to inhibit cell proliferation in a dose-dependent way and the combined treatment with ADM and Se NPs was more effective in inhibiting cell growth than each of the two drugs alone. The cytotoxic effects of drug combination were evaluated with the modified Bürgi formula (Jin equation) based the Deltaf(0) responses. The grades gradually changed from apparent synergism to simple addition with the drug-treatment time increasing but the drug combination with lower concentrations still exhibited synergism after 24h, suggesting a potential application in cancer therapy.