Qingjie Guo

Morphology, Crystallization and Formation Mechanism of Poly(Vinylidene Fluoride) Membranes Prepared with Immersion Precipitation: Effect of Maturation Time

Poly(vinylidene fluoride) (PVDF) membranes were prepared by the immersion precipitation method. Effects of the maturation time of dopes on the morphology and crystallization of the prepared membranes were investigated. The analysis showed that the maturation time played an important role in determining the morphology of the prepared membranes. For the dope prepared in the initial day, liquid–liquid demixing preceded solid–liquid demixing in the process of the membrane formation. The morphology of the cross section of the prepared membrane (M1) was finger-like structures with a sponge substrate beneath the porous skin. During the maturation, the dopes underwent a microscopic phase separation and the PVDF crystallized, which resulted in the existence of micro-liquid phases and micro-solid phase crystalline areas in the dopes. In the process of the membrane formation, liquid–liquid demixing took place by nucleation and growth of droplets of the polymer rich phase in the micro-liquid phase. The micro-solid phase crystallites were connected together by the polymer chains, and formed a three-dimensional network gelation morphology. The crystal structure of M1 was mainly β crystals. With increasing maturation time of the dopes, the proportion of β decreased crystals, but that of α crystals increased for the prepared membranes.

Surface Modification of Poly(tetrafluoroethylene) Microporous Membranes by Acrylic Acid Liquid-Phase Graft Copolymerization

Air plasma-pretreated poly(tetrafluoroethylene) (PTFE) films were subjected to further surface modification by liquid-phase graft copolymerization with acrylic acid monomer (AAc). The surface compositions and microstructures of the modified films were characterized by X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). An exterior graft copolymerization of AAc on the PTFE fiber was indicated by the SEM photographs. The XPS results indicated that the F/C atomic ratio of the membranes were 1.837 and 1.207, and the O/C atomic ratio were 0 and 0.112 for the original and liquid-phase grafted PTFE membranes, respectively. The pore size distributions of the treated and untreated PTFE membranes, measured by the bubble-point method, were much smaller than that of the untreated membrane.