Qinglang Ma

2D Transition-Metal-Dichalcogenide-Nanosheet-Based Composites for Photocatalytic and Electrocatalytic Hydrogen Evolution Reactions.

Hydrogen (H2) is one of the most important clean and renewable energy sources for future energy sustainability. Nowadays, photocatalytic and electrocatalytic hydrogen evolution reactions (HERs) from water splitting are considered as two of the most efficient methods to convert sustainable energy to the clean energy carrier, H2. Catalysts based on transition metal dichalcogenides (TMDs) are recognized as greatly promising substitutes for noble-metal-based catalysts for HER. The photocatalytic and electrocatalytic activities of TMD nanosheets for the HER can be further improved after hybridization with many kinds of nanomaterials, such as metals, oxides, sulfides, and carbon materials, through different methods including the in situ reduction method, the hot-injection method, the heating-up method, the hydro(solvo)thermal method, chemical vapor deposition (CVD), and thermal annealing. Here, recent progress in photocatalytic and electrocatalytic HERs using 2D TMD-based composites as catalysts is discussed.

Recent Development of Advanced Materials with Special Wettability for Selective Oil/Water Separation.

The increasing number of oil spill accidents have a catastrophic impact on our aquatic environment. Recently, special wettable materials used for the oil/water separation have received significant research attention. Due to their opposing affinities towards water and oil, i.e., hydrophobic and oleophilic, or hydrophilic and oleophobic, such materials can be used to remove only one phase from the oil/water mixture, and simultaneously repel the other phase, thus achieving selective oil/water separation. Moreover, the synergistic effect between the surface chemistry and surface architecture can further promote the superwetting behavior, resulting in the improved separation efficiency. Here, recently developed materials with special wettability for selective oil/water separation are summarized and discussed. These materials can be categorized based on their oil/water separating mechanisms, i.e., filtration and absorption. In each section, representative studies will be highlighted, with emphasis on the materials wetting properties and innovative aspects. Finally, challenges and future research directions in this emerging and promising research field will be briefly described.

Ultrathin 2D Metal–Organic Framework Nanosheets

A facile surfactant-assisted bottom-up synthetic method to prepare a series of freestanding ultrathin 2D M-TCPP (M = Zn, Cu, Cd or Co, TCPP = tetrakis(4-carboxyphenyl)porphyrin) nanosheets with a thickness of sub-10 nm is developed. As a proof-of-concept application, some of them are successfully used as new platforms for DNA detection. The Cu-TCPP nanosheet-based sensor shows excellent fluorescent sensing performance and is used for the simultaneous detection of multiple DNA targets.

Self‐Assembly of Single‐Layer CoAl‐Layered Double Hydroxide Nanosheets on 3D Graphene Network Used as Highly Efficient Electrocatalyst for Oxygen Evolution Reaction

A non-noble metal based 3D porous electrocatalyst is prepared by self-assembly of the liquid-exfoliated single-layer CoAl-layered double hydroxide nanosheets (CoAl-NSs) onto 3D graphene network, which exhibits higher catalytic activity and better stability for electrochemical oxygen evolution reaction compared to the commercial IrO2 nanoparticle-based 3D porous electrocatalyst.

Carbon-based sorbents with three-dimensional architectures for water remediation

Over the past decade, carbon-based 3D architectures have received increasing attention in science and technology due to their fascinating properties, such as a large surface area, macroscopic bulky shape, and interconnected porous structures, enabling them to be one of the most promising materials for water remediation. This review summarizes the recent development in design, preparation, and applications of carbon-based 3D architectures derived from carbon nanotubes, graphene, biomass, or synthetic polymers for water treatment. After a brief introduction of these materials and their synthetic strategies, their applications in water treatment, such as the removal of oils/organics, ions, and dyes, are summarized. Finally, future perspective directions for this promising field are also discussed.

Bioinspired Design of Ultrathin 2D Bimetallic Metal–Organic-Framework Nanosheets Used as Biomimetic Enzymes

With the bioinspired design of organic ligands and metallic nodes, novel ultrathin 2D bimetallic metal-organic-framework nanosheets are successfully synthesized, which can serve as advanced 2D biomimetic nanomaterials to mimic heme proteins.

Carbon-Based Functional Materials Derived from Waste for Water Remediation and Energy Storage

Carbon-based functional materials hold the key for solving global challenges in the areas of water scarcity and the energy crisis. Although carbon nanotubes (CNTs) and graphene have shown promising results in various fields of application, their high preparation cost and low production yield still dramatically hinder their wide practical applications. Therefore, there is an urgent call for preparing carbon-based functional materials from low-cost, abundant, and sustainable sources. Recent innovative strategies have been developed to convert various waste materials into valuable carbon-based functional materials. These waste-derived carbon-based functional materials have shown great potential in many applications, especially as sorbents for water remediation and electrodes for energy storage. Here, the research progress in the preparation of waste-derived carbon-based functional materials is summarized, along with their applications in water remediation and energy storage; challenges and future research directions in this emerging research field are also discussed.

Growth of Au Nanoparticles on 2D Metalloporphyrinic Metal-Organic Framework Nanosheets Used as Biomimetic Catalysts for Cascade Reactions

Inspired by the multiple functions of natural multienzyme systems, a new kind of hybrid nanosheet is designed and synthesized, i.e., ultrasmall Au nanoparticles (NPs) grown on 2D metalloporphyrinic metal-organic framework (MOF) nanosheets. Since 2D metalloporphyrinic MOF nanosheets can act as the peroxidase mimics and Au NPs can serve as artificial glucose oxidase, the hybrid nanosheets are used to mimic the natural enzymes and catalyze the cascade reactions. Furthermore, the synthesized hybrid nanosheets are used to detect biomolecules, such as glucose. This study paves a new avenue to design nanomaterial-based biomimetic catalysts with multiple complex functions.

Preparation of Superhydrophilic and Underwater Superoleophobic Nanofiber‐Based Meshes from Waste Glass for Multifunctional Oil/Water Separation

The deterioration of water resources due to oil pollution, arising from oil spills, industrial oily wastewater discharge, etc., urgently requires the development of novel functional materials for highly efficient water remediation. Recently, superhydrophilic and underwater superoleophobic materials have drawn significant attention due to their low oil adhesion and selective oil/water separation. However, it is still a challenge to prepare low-cost, environmentally friendly, and multifunctional materials with superhydrophilicity and underwater superoleophobicity, which can be stably used for oil/water separation under harsh working conditions. Here, the preparation of nanofiber-based meshes derived from waste glass through a green and sustainable route is demonstrated. The resulting meshes exhibit excellent performance in the selective separation of a wide range of oil/water mixtures. Importantly, these meshes can also maintain the superwetting property and high oil/water separation efficiency under various harsh conditions. Furthermore, the as-prepared mesh can remove water-soluble contaminants simultaneously during the oil/water separation process, leading to multifunctional water purification. The low-cost and environmentally friendly fabrication, harsh-environment resistance, and multifunctional characteristics make these nanofiber-based meshes promising toward oil/water separation under practical conditions.

Anodized Aluminum Oxide Templated Synthesis of Metal–Organic Frameworks Used as Membrane Reactors

The incorporation of metal-organic frameworks (MOFs) into membrane-shaped architectures is of great importance for practical applications. The currently synthesized MOF-based membranes show many disadvantages, such as poor compatibility, low dispersity, and instability, which severely limit their utility. Herein, we present a general, facile, and robust approach for the synthesis of MOF-based composite membranes through the in situ growth of MOF plates in the channels of anodized aluminum oxide (AAO) membranes. After being used as catalysis reactors, they exhibit high catalytic performance and stability in the Knoevenagel condensation reaction. The high catalytic performance might be attributed to the intrinsic structure of MOF-based composite membranes, which can remove the products from the reaction zone quickly, and prevent the aggregation and loss of catalysts during reaction and recycling process.