Qingshui Xie

Copper Nanowires as Fully Transparent Conductive Electrodes

In pondering of new promising transparent conductors to replace the cost rising tin-doped indium oxide (ITO), metal nanowires have been widely concerned. Herein, we demonstrate an approach for successful synthesis of long and fine Cu nanowires (NWs) through a novel catalytic scheme involving nickel ions. Such Cu NWs in high aspect ratio (diameter of 16.2 ± 2 nm and length up to 40 μm) provide long distance for electron transport and, meanwhile, large space for light transmission. Transparent electrodes fabricated using the Cu NW ink achieve a low sheet resistance of 1.4 Ohm/sq at 14% transmittance and a high transparency of 93.1% at 51.5 Ohm/sq. The flexibility and stability were tested with 100-timebending by 180°and no resistance change occurred. Ohmic contact was achieved to the p- and n-GaN on blue light emitting diode chip and bright electroluminescence from the front face confirmed the excellent transparency.

Template-Free Synthesis of Amorphous Double-Shelled Zinc-Cobalt Citrate Hollow Microspheres and Their Transformation to Crystalline ZnCo2O4 Microspheres

A novel and facile approach was developed for the fabrication of amorphous double-shelled zinc-cobalt citrate hollow microspheres and crystalline double-shelled ZnCo2O4 hollow microspheres. In this approach, amorphous double-shelled zinc-cobalt citrate hollow microspheres were prepared through a simple route and with an aging process at 70 °C. The combining inward and outward Ostwald ripening processes are adopted to account for the formation of these double-shelled architectures. The double-shelled ZnCo2O4 hollow microspheres can be prepared via the perfect morphology inheritance of the double-shelled zinc-cobalt citrate hollow microspheres, by calcination at 500 °C for 2 h. The resultant double-shelled ZnCo2O4 hollow microspheres manifest a large reversible capacity, superior cycling stability, and good rate capability.

Electrostatic Assembly of Sandwich-like Ag-C@ZnO-C@Ag-C Hybrid Hollow Microspheres with Excellent High-Rate Lithium Storage Properties

Herein, we introduce a facile electrostatic attraction approach to produce zinc-silver citrate hollow microspheres, followed by thermal heating treatment in argon to ingeniously synthesize sandwich-like Ag-C@ZnO-C@Ag-C hybrid hollow microspheres. The 3D carbon conductive framework in the hybrids derives from the in situ carbonation of carboxylate acid groups in zinc-silver citrate hollow microspheres during heating treatment, and the continuous and homogeneous Ag nanoparticles on the outer and inner surfaces of hybrid hollow microspheres endow the shells with the sandwiched configuration (Ag-C@ZnO-C@Ag-C). When applied as the anode materials for lithium ion batteries, the fabricated hybrid hollow microspheres with sandwich-like shells reveal a very large reversible capacity of 1670 mAh g(-1) after 200 cycles at a current density of 0.2 A g(-1). Even at the very large current densities of 1.6 and 10.0 A g(-1), the high specific capacities of about 1063 and 526 mAh g(-1) can be retained, respectively. The greatly enhanced electrochemical properties of Ag-C@ZnO-C@Ag-C hybrid microspheres are attributed to their special structural features such as the hollow structures, the sandwich-like shells, and the nanometer-sized building blocks.

Facile Preparation of Well-Dispersed CeO2–ZnO Composite Hollow Microspheres with Enhanced Catalytic Activity for CO Oxidation

In this article, well-dispersed CeO2-ZnO composite hollow microspheres have been fabricated through a simple chemical reaction followed by annealing treatment. Amorphous zinc-cerium citrate hollow microspheres were first synthesized by dispersing zinc citrate hollow microspheres into cerium nitrate solution and then aging at room temperature for 1 h. By calcining the as-produced zinc-cerium citrate hollow microspheres at 500 °C for 2 h, CeO2-ZnO composite hollow microspheres with homogeneous composition distribution could be harvested for the first time. The resulting CeO2-ZnO composite hollow microspheres exhibit enhanced activity for CO oxidation compared with CeO2 and ZnO, which is due to well-dispersed small CeO2 particles on the surface of ZnO hollow microspheres and strong interaction between CeO2 and ZnO. Moreover, when Au nanoparticles are deposited on the surface of the CeO2-ZnO composite hollow microspheres, the full CO conversion temperature of the as-produced 1.0 wt % Au-CeO2-ZnO composites reduces from 300 to 60 °C in comparison with CeO2-ZnO composites. The significantly improved catalytic activity may be ascribed to the strong synergistic interplay between Au nanoparticles and CeO2-ZnO composites.

Hierarchical ZnO-Ag-C composite porous microspheres with superior electrochemical properties as anode materials for lithium ion batteries

Hierarchical ZnO-Ag-C composite porous microspheres are successfully synthesized by calcination of the preproduced zinc-silver citrate porous microspheres in argon. The carbon derives from the in situ carbonization of carboxylic acid groups in zinc-silver citrate during annealing treatment. The average particle size of ZnO-Ag-C composite porous microspheres is approximate 1.5 μm. When adopted as the electrode materials in lithium ion batteries, the obtained composite porous microspheres display high specific capacity, excellent cyclability, and good rate capability. A discharge capacity as high as 729 mA h g(-1) can be retained after 200 cycles at 100 mA g(-1). The excellent electrochemical properties of ZnO-Ag-C are ascribed to its unique hierarchical porous configuration as well as the modification of silver and carbon.

Facile fabrication of various zinc-nickel citrate microspheres and their transformation to ZnO-NiO hybrid microspheres with excellent lithium storage properties

Zinc-nickel citrate microspheres are prepared by a simple aging process of zinc citrate solid microspheres in nickel nitrate solution. As the concentration of nickel nitrate solution increases, the morphology of the produced zinc-nickel citrate evolves from solid, yolk-shell to hollow microspheres. The formation mechanism of different zinc-nickel citrate microspheres is discussed. After annealing treatment of the corresponding zinc-nickel citrate microspheres in air, three different ZnO-NiO hybrid architectures including solid, yolk-shell and hollow microspheres can be successfully fabricated. When applied as the anode materials for lithium ion batteries, ZnO-NiO hybrid yolk-shell microspheres demonstrate the best electrochemical properties than solid and hollow counterparts. After 200th cycles, ZnO-NiO hybrid yolk-shell microspheres deliver a high reversible capacity of 1176 mA h g−1. The unique yolk-shell configuration, the synergetic effect between ZnO and NiO and the catalytic effect of metal Ni generated by the reduction of NiO during discharging process are responsible for the excellent lithium storage properties of ZnO-NiO hybrid yolk-shell microspheres.

Shape-related optical and catalytic properties of wurtzite-type CoO nanoplates and nanorods

In this paper, we report the anisotropic optical and catalytic properties of wurtzite-type hexagonal CoO (h-CoO) nanocrystals, an unusual nanosized indirect semiconductor material. h-CoO nanoplates and nanorods with a divided morphology have been synthesized via facile solution methods. The employment of flash-heating and surfactant tri-n-octylphosphine favors the formation of plate-like morphology, whereas the utilization of cobalt stearate as a precursor is critical for the synthesis of nanorods. Structural analyses indicate that the basal plane of the nanoplates is (001) face and the growth direction of the nanorods is along the c axis. Moreover, the UV–vis absorption spectra, the corresponding energy gap and the catalytic properties are found to vary with the crystal shape and the dimensions of the as-prepared h-CoO nanocrystals. Furthermore, remarkable catalytic activities for H2 generation from the hydrolysis of alkaline NaBH4 solutions have been observed for the as-prepared h-CoO nanocrystals. The calculated Arrhenius activation energies show a decreasing trend with increasing extension degree along the <001> direction, which is in agreement with the variation of the charge-transfer energy gap. Finally the maximum hydrogen generation rate of the h-CoO nanoplates exceeds most of the reported values of transition metal or noble metal containing catalysts performing in the same reaction system, which makes them a low-cost alternative to commonly used noble metal catalysts in H2 generation from the hydrolysis of borohydrides, and might find potential applications in the field of green energy.

Disproportionation route to monodispersed copper nanoparticles for the catalytic synthesis of propargylamines

By taking advantage of the coordination between a monovalent Cu+ precursor and trioctylphosphine, monodisperse Cu nanoparticles were synthesized via a disproportionation reaction. A Cu@SiO2 nanocatalyst was formed by supporting Cu nanoparticles onto a silica aerogel, which showed a high surface area (779.53 m2 g−1) and excellent catalytic activity for the synthesis of propargylamines.

A facile approach to fabrication of well-dispersed NiO–ZnO composite hollow microspheres

A novel, facile and template-free approach was developed for the fabrication of amorphous zinc-nickel citrate hollow microspheres and crystalline well-dispersed NiO–ZnO composite hollow microspheres. In this approach, amorphous zinc-nickel citrate hollow microspheres were prepared through a simple chemical reaction and with room temperature ageing at nickel nitrate solution. The zinc-nickel citrate hollow microspheres have an average size of about 1.4 μm. The average thickness of the shell is about 300 nm. The content of Ni in the zinc-nickel citrate can be simply adjusted by changing the ageing time. The well-dispersed NiO–ZnO composite hollow microspheres can be prepared via the perfect morphology inheritance of the zinc-nickel citrate hollow microspheres, by calcination at 500 °C for 2 h. The optical absorption of the samples can extend into the visible region after the loading of NiO. The NiO–ZnO composite hollow microspheres with the high content of NiO exhibit the highest photocatalytic activity for the degradation of different organic dyes including Rhodamine-B, methylene blue and methyl orange under UV irradiation, which might be ascribed to their highest separation efficiency of photogenerated electron–hole pairs. In addition, these NiO–ZnO composite photocatalysts can be used repeatedly without a significant decrease of the photocatalytic activity under UV irradiation.

Synthesis and photocatalytic properties of multi-morphological AuCu3-ZnO hybrid nanocrystals.

Noble metal-semiconductor hybrid nanocrystals represent an important class of materials for many potential applications, especially for photocatalysis. The utilization of transition metals to form alloys with noble metals can not only reduce the preparation costs, but may also offer tunable optical and catalytic properties for a broader range of applications. In this study, we report on the solution synthesis of AuCu3-ZnO hybrid nanocrystals with three interesting morphologies, including urchin-like, flower-like and multipod-like nanocrystals. In the synthetic strategy, Au-Cu bimetallic alloy seeds formed in situ are used to induce the heteroepitaxial growth of ZnO nanocrystals on the surface of bimetallic alloy cores; thus different types of morphologies can be achieved by controlling the reaction conditions. Through high-resolution transmission electron microscopy observations, well-defined interfaces between ZnO and AuCu3 are observed, which indicate that ZnO has a (0001) orientation and prefers to grow on AuCu3 {111} facets. The as-prepared hybrid nanocrystals demonstrate morphology- and composition-dependent surface plasmon resonance (SPR) absorption bands. In addition, much higher photocatalytic efficiency than pure ZnO nanocrystals is observed for the hybrid nanocrystals in the degradation of methylene blue. In particular, the multipod-like AuCu3-ZnO hybrid nanocrystals show the highest catalytic performance, as well as more than three times higher photocurrent density than the pure ZnO sample. The reported synthetic strategy provides a facile route to the effective combination of a plasmonic alloy with semiconductor components at the nanoscale in a controlled manner.