Qiuzhi Qu

Subhertz linewidth laser by locking to a fiber delay line

An ultralow-noise, subhertz 1.55 μm erbium-doped fiber laser that is locked on an all-fiber-based Michelson interferometer is presented in this paper. The interferometer uses 500 m SMF-28 optical fiber and an acousto-optic modulator to allow heterodyne detection. By comparing two identical laser systems, a 0.67 (0.21) Hz linewidth beat-note signal is achieved and we obtain fractional frequency instability of 7×10(-15) at short timescales (0.1-1 s). The frequency noise power spectral density of two identical lasers is below -1  dB Hz(2)/Hz at 1 Hz and it reaches -18  dB Hz(2)/Hz from 200 Hz to 1 kHz.

In-orbit operation of an atomic clock based on laser-cooled 87 Rb atoms

Atomic clocks based on laser-cooled atoms are widely used as primary frequency standards. Deploying such cold atom clocks (CACs) in space is foreseen to have many applications. Here we present tests of a CAC operating in space. In orbital microgravity, the atoms are cooled, trapped, launched, and finally detected after being interrogated by a microwave field using the Ramsey method. Perturbing influences from the orbital environment on the atoms such as varying magnetic fields and the passage of the spacecraft through Earth’s radiation belt are also controlled and mitigated. With appropriate parameters settings, closed-loop locking of the CAC is realized in orbit and an estimated short-term frequency stability close to 3.0 × 10−13τ−1/2 has been attained. The demonstration of the long-term operation of cold atom clock in orbit opens possibility on the applications of space-based cold atom sensors.Cold atom clocks are among the most precise measuring devices and play key roles in everyday life and scientific explorations. Here the authors demonstrate the first in-orbit atomic clock using cold Rb atoms operating in microgravity and opening possibilities of space surveys and tests of fundamental physics.

State Preparation in a Cold Atom Clock by Optical Pumping

We implement optical pumping to prepare cold atoms in our prototype of the Rb-87 space cold atom clock, which operates in the one-way mode. Several modifications are made on our previous physical and optical system. The effective atomic signal in the top detection zone is increased to 2.5 times with 87% pumping efficiency. The temperature of the cold atom cloud is increased by 1.4 mu K. We study the dependences of the effective signal gain and pumping efficiency on the pumping laser intensity and detuning. The effects of sigma transition are discussed. This technique may be used in the future space cold atom clocks.

Initial Tests of a Rubidium Space Cold Atom Clock

We report the initial test results of a rubidium (87Rb) space cold atom clock (SCAC). The space-qualified 87Rb SCAC is composed of the physical package, the optical bench, the microwave synthesizer and the control electronics. After the system is integrated, about 108 87Rb cold atoms are captured by magneto-optical trap. The linewidth of the Ramsey fringe is about 10 Hz for the free evolution time of 50 ms on the ground, and the signal-to-noise ratio is measured to be larger than 300. We demonstrate a good medium-term fractional frequency stability of 1.5 × 10−14@1000 s in the closed-loop operation on the ground. The main effects of the noise on the stability are also presented, and the optimized operating parameter is analyzed for the operation of SCAC in the microgravity environment.

Highly reliable optical system for a rubidium space cold atom clock.

We describe a highly reliable optical system designed for a rubidium space cold atom clock (SCAC), presenting its design, key technologies, and optical components. All of the optical and electronic components are integrated onto an optimized two-sided 300  mm×290  mm×30  mm optical bench. The compact optical structure and special thermal design ensure that the optical system can pass all of the space environmental qualification tests including both thermal vacuum and mechanical tests. To verify its performance, the optical system is carefully checked before and after each test. The results indicate that this optical system is suitably robust for the space applications for which the rubidium SCAC was built.

Design of a space atomic clock with intracavity cooling

We present the design of a space atomic clock with intracavity cooling of atoms (SACIC). Combined with a 2D MOT, the rubidium atoms are cooled, state-selected, interrogated and then detected in a cylindrical microwave cavity. This design can largely reduce the dead time in the clock cycle. Furthermore, in benefit of its compact structure, we can lay out two same microwave cavity in the space clock to cancel the Dick effect with a zero dead time.