Qiyuan He

Graphene-based materials: synthesis, characterization, properties, and applications.

Graphene, a two-dimensional, single-layer sheet of sp(2) hybridized carbon atoms, has attracted tremendous attention and research interest, owing to its exceptional physical properties, such as high electronic conductivity, good thermal stability, and excellent mechanical strength. Other forms of graphene-related materials, including graphene oxide, reduced graphene oxide, and exfoliated graphite, have been reliably produced in large scale. The promising properties together with the ease of processibility and functionalization make graphene-based materials ideal candidates for incorporation into a variety of functional materials. Importantly, graphene and its derivatives have been explored in a wide range of applications, such as electronic and photonic devices, clean energy, and sensors. In this review, after a general introduction to graphene and its derivatives, the synthesis, characterization, properties, and applications of graphene-based materials are discussed.

Single‐Layer Semiconducting Nanosheets: High‐Yield Preparation and Device Fabrication

The common featureof these materials is that the bulk material forms are layeredstructures with strong covalent bonding in each layer andweak van der Waals forces between the layers. Therefore,single or few-layer nanosheets of these materials can beobtained by using adhesive tapes for mechanical cleavage.

Fabrication of Single‐ and Multilayer MoS2 Film‐Based Field‐Effect Transistors for Sensing NO at Room Temperature

Single- and multilayer MoS(2) films are deposited onto Si/SiO(2) using the mechanical exfoliation technique. The films were then used for the fabrication of field-effect transistors (FETs). These FET devices can be used as gas sensors to detect nitrous oxide (NO). Although the single-layer MoS(2) device shows a rapid response after exposure to NO, the current was found to be unstable. The two-, three-, and four-layer MoS(2) devices show both stable and sensitive responses to NO down to a concentration of 0.8 ppm.

Recent Advances in Ultrathin Two-Dimensional Nanomaterials

Since the discovery of mechanically exfoliated graphene in 2004, research on ultrathin two-dimensional (2D) nanomaterials has grown exponentially in the fields of condensed matter physics, material science, chemistry, and nanotechnology. Highlighting their compelling physical, chemical, electronic, and optical properties, as well as their various potential applications, in this Review, we summarize the state-of-art progress on the ultrathin 2D nanomaterials with a particular emphasis on their recent advances. First, we introduce the unique advances on ultrathin 2D nanomaterials, followed by the description of their composition and crystal structures. The assortments of their synthetic methods are then summarized, including insights on their advantages and limitations, alongside some recommendations on suitable characterization techniques. We also discuss in detail the utilization of these ultrathin 2D nanomaterials for wide ranges of potential applications among the electronics/optoelectronics, electrocatalysis, batteries, supercapacitors, solar cells, photocatalysis, and sensing platforms. Finally, the challenges and outlooks in this promising field are featured on the basis of its current development.

Fabrication of Flexible MoS2 Thin‐Film Transistor Arrays for Practical Gas‐Sensing Applications

By combining two kinds of solution-processable two-dimensional materials, a flexible transistor array is fabricated in which MoS(2) thin film is used as the active channel and reduced graphene oxide (rGO) film is used as the drain and source electrodes. The simple device configuration and the 1.5 mm-long MoS(2) channel ensure highly reproducible device fabrication and operation. This flexible transistor array can be used as a highly sensitive gas sensor with excellent reproducibility. Compared to using rGO thin film as the active channel, this new gas sensor exhibits much higher sensitivity. Moreover, functionalization of the MoS(2) thin film with Pt nanoparticles further increases the sensitivity by up to ∼3 times. The successful incorporation of a MoS(2) thin-film into the electronic sensor promises its potential application in various electronic devices.

Centimeter-Long and Large-Scale Micropatterns of Reduced Graphene Oxide Films: Fabrication and Sensing Applications

Recently, the field-effect transistors (FETs) with graphene as the conducting channels have been used as a promising chemical and biological sensors. However, the lack of low cost and reliable and large-scale preparation of graphene films limits their applications. In this contribution, we report the fabrication of centimeter-long, ultrathin (1-3 nm), and electrically continuous micropatterns of highly uniform parallel arrays of reduced graphene oxide (rGO) films on various substrates including the flexible polyethylene terephthalate (PET) films by using the micromolding in capillary method. Compared to other methods for the fabrication of graphene patterns, our method is fast, facile, and substrate independent. In addition, we demonstrate that the nanoelectronic FETs based on our rGO patterns are able to label-freely detect the hormonal catecholamine molecules and their dynamic secretion from living cells.

Organic Photovoltaic Devices Using Highly Flexible Reduced Graphene Oxide Films as Transparent Electrodes

The chemically reduced graphene oxide (rGO) was transferred onto polyethylene terephthalate (PET) substrates and then used as transparent and conductive electrodes for flexible organic photovoltaic (OPV) devices. The performance of the OPV devices mainly depends on the charge transport efficiency through rGO electrodes when the optical transmittance of rGO is above 65%. However, if the transmittance of rGO is less than 65%, the performance of the OPV device is dominated by the light transmission efficiency, that is, the transparency of rGO films. After the tensile strain (∼2.9%) was applied on the fabricated OPV device, it can sustain a thousand cycles of bending. Our work demonstrates the highly flexible property of rGO films, which provide the potential applications in flexible optoelectronics.

Graphene‐Based Electrochemical Sensors

Graphene, one kind of emerging carbon nanomaterial, has attracted increasing attention recently. Due to its fascinating physical and electrochemical properties, graphene as a promising electrode material has been widely used in electrochemical sensing applications. In this review, different approaches for the fabrication of graphene and the preparation of graphene-modified electrodes for electrochemical sensors are introduced. Moreover, recent research results on different graphene-based materials as an electrochemical platform for the detection of various biomolecules and chemicals are reviewed and compared. More electrochemical studies on this novel material should show up in the near future.

Electrochemically Reduced Single‐Layer MoS2 Nanosheets: Characterization, Properties, and Sensing Applications

The electrochemical study of single-layer, 2D MoS₂ nanosheets reveals a reduction peak in the cyclic voltammetry in NaCl aqueous solution. The electrochemically reduced MoS₂ (rMoS₂) shows good conductivity and fast electron transfer rate in the [Fe(CN)₆]³⁻/⁴⁻ and [Ru(NH₃)₆]²⁺/³⁺ redox systems. The obtained rMoS₂ can be used for glucose detection. In addition, it can selectively detect dopamine in the presence of ascorbic acid and uric acid. This novel material, rMoS₂, is believed to be a good electrode material for electrochemical sensing applications.

Interfacing live cells with nanocarbon substrates.

Nanocarbon materials, including single-walled carbon nanotubes (SWCNTs) and graphene, promise various novel biomedical applications (e.g., nanoelectronic biosensing). In this Letter, we study the ability of SWCNT networks and reduced graphene oxide (rGO) films in interfacing several types of cells, such as neuroendocrine PC12 cells, oligodendroglia cells, and osteoblasts. It was found that rGO is biocompatible with all these cell types, whereas the SWCNT network is inhibitory to the proliferation, viability, and neuritegenesis of PC12 cells, and the proliferation of osteoblasts. These observations could be attributed to the distinct nanotopographic features of these two kinds of nanocarbon substrates.