R.A.M. de Jeu

A methodology for surface soil moisture and vegetation optical depth retrieval using the microwave polarization difference index

A methodology for retrieving surface soil moisture and vegetation optical depth from satellite microwave radiometer data is presented. The procedure is tested with historical 6.6 GHz H and V polarized brightness temperature observations from the scanning multichannel microwave radiometer (SMMR) over several test sites in Illinois. Results using only nighttime data are presented at this time due to the greater stability of nighttime surface temperature estimation. The methodology uses a radiative transfer model to solve for surface soil moisture and vegetation optical depth simultaneously using a nonlinear iterative optimization procedure. It assumes known constant values for the scattering albedo and roughness, and that vegetation optical depth for H-polarization is the same as for V-polarization. Surface temperature is derived by a procedure using high frequency V-polarized brightness temperatures. The methodology does not require any field observations of soil moisture or canopy biophysical properties for calibration purposes and may be applied to other wavelengths. Results compare well with field observations of soil moisture and satellite-derived vegetation index data from optical sensors.

Land Surface Temperature from Ka-band (37 GHZ) Passive Microwave Observations

[1] An alternative to thermal infrared satellite sensors for measuring land surface temperature (Ts) is presented. The 37 GHz vertical polarized brightness temperature is used to derive Ts because it is considered the most appropriate microwave frequency for temperature retrieval. This channel balances a reduced sensitivity to soil surface characteristics with a relatively high atmospheric transmissivity. It is shown that with a simple linear relationship, accurate values for Ts can be obtained from this frequency, with a theoretical bias of within 1 K for 70% of vegetated land areas of the globe. Barren, sparsely vegetated, and open shrublands cannot be accurately described with this single channel approach because variable surface conditions become important. The precision of the retrieved land surface temperature is expected to be better than 2.5 K for forests and 3.5 K for low vegetation. This method can be used to complement existing infrared derived temperature products, especially during clouded conditions. With several microwave radiometers currently in orbit, this method can be used to observe the diurnal temperature cycles with surprising accuracy.

An Intercomparison of ERS-Scat and AMSR-E Soil Moisture Observations with Model Simulations over France

Abstract This paper presents a study undertaken in preparation of the work leading up to the assimilation of Soil Moisture and Ocean Salinity (SMOS) observations into the land surface model (LSM) Interaction Soil Biosphere Atmosphere (ISBA) at Meteo-France. This study consists of an intercomparison experiment of different space-borne platforms providing surface soil moisture information [Advanced Microwave Scanning Radiometer for Earth Observing (AMSR-E) and European Remote Sensing Satellite Scatterometer (ERS-Scat)] with the reanalysis soil moisture predictions over France from the model suite of Systeme d’analyse fournissant des renseignements atmospheriques a la neige (SAFRAN), ISBA, and coupled model (MODCOU; SIM) of Meteo-France for the years of 2003–05. Both modeled and remotely sensed data are initially validated against in situ observations obtained at the experimental soil moisture monitoring site Surface Monitoring of the Soil Reservoir Experiment (SMOSREX) in southwestern France. Two different ...

Analytical derivation of the vegetation optical depth from the microwave polarization difference index

A numerical solution for the canopy optical depth in an existing microwave-based land surface parameter retrieval model is presented. The optical depth is derived from the microwave polarization difference index and the dielectric constant of the soil. The original procedure used an approximation in the form of a logarithmic decay function to define this relationship and was derived through a series of lengthy polynomials. These polynomials had to be recalculated when the scattering albedo or antenna incidence angle changes. The new procedure is computationally more efficient and accurate.

Skill and global trend analysis of soil moisture from reanalysis and microwave remote sensing

AbstractIn situ soil moisture measurements from 2007 to 2010 for 196 stations from five networks across the world (United States, France, Spain, China, and Australia) are used to determine the reliability of three soil moisture products: (i) a revised version of the ECMWF Interim Re-Analysis (ERA-Interim; ERA-Land); (ii) a revised version of the Modern-Era Retrospective Analysis for Research and Applications (MERRA) reanalysis from NASA (MERRA-Land); and (iii) a new, microwave-based multisatellite surface soil moisture dataset (SM-MW). Evaluation of the time series and anomalies from a moving monthly mean shows a good performance of the three products in capturing the annual cycle of surface soil moisture and its short-term variability. On average, correlations (95% confidence interval) are 0.66 (±0.038), 0.69 (±0.038), and 0.60 (±0.061) for ERA-Land, MERRA-Land, and SM-MW. The two reanalysis products also capture the root-zone soil moisture well; on average, correlations are 0.68 (±0.035) and 0.73 (±0.03...

Soil moisture-temperature coupling: A multiscale observational analysis

[1] Land-atmospheric interactions are complex and variable in space and time. On average soil moisture-temperature coupling is expected to be stronger in transition zones between wet and dry climates. During heatwaves anomalously high coupling may be found in areas of soil moisture deficit and high atmospheric demand of water. Here a new approach is applied to satellite andin situobservations towards the characterization of regions of intense soil moisture-temperature coupling, both in terms of climatology and anomalies during heatwaves. The resulting average summertime couplinghot spotsreflect intermediate climatic regions in agreement with previous studies. Results at heatwave-scale suggest a minor role of soil moisture deficit during the heatwave of 2006 in California but an important one in the 2003 event in Western Europe. Progress towards near-real time satellite products may allow the application of the approach to aid prediction and management of warm extremes.

Error Estimates for Near-Real-Time Satellite Soil Moisture as Derived From the Land Parameter Retrieval Model

A time-efficient solution to estimate the error of satellite surface soil moisture from the land parameter retrieval model is presented. The errors are estimated using an analytical solution for soil moisture retrievals from this radiative-transfer-based model that derives soil moisture from low-frequency passive microwave observations. The error estimate is based on a basic error propagation equation which uses the partial derivatives of the radiative transfer equation and estimated errors for each individual input parameter. Results similar to those of the Monte Carlo approach show that the developed time-efficient methodology could substitute computationally intensive methods. This procedure is therefore a welcome solution for near-real-time data assimilation studies where both the soil moisture product and error estimate are needed. The developed method is applied to the C-, X-, and Ku-bands of the Aqua/Advanced Microwave Scanning Radiometer for Earth Observing System sensor to study differences in errors between frequencies.

Improving Curve Number Based Storm Runoff Estimates Using Soil Moisture Proxies

Advances in data dissemination and the availability of new remote sensing datasets present both opportunities and challenges for hydrologists in improving flood forecasting systems. The current study investigates the improvement in SCS curve number (CN)-based storm runoff estimates obtained after inclusion of various soil moisture proxies based on additional data on precipitation, baseflow, and soil moisture. A dataset (1980-2007) comprising 186 Australian catchments (ranging from 51 to 1979 km 2 in size) was used. In order to investigate the value of a particular proxy, the observed S (potential maximum retention) was compared to values obtained with different soil moisture proxies using linear regression. An antecedent precipitation index (API) based on gauged precipitation using a decay parameter proved most valuable in improving storm runoff estimates, stressing the importance of high quality precipitation data. An antecedent baseflow index (ABFI) also performed well. Proxies based on remote sensing (TRMM and AMSR-E) gave promising results, particularly when considering the expected arrival of higher accuracy data from upcoming satellites. The five-day API performed poorly. The inclusion of soil moisture proxies resulted in mean modeled versus observed correlation coefficients around 0.75 for almost all proxies. The greatest improvement in runoff estimates was observed in drier catchments with low Enhanced Vegetation Index (EVI) and topographical slope (all intercorrelated parameters). The present results suggest the usefulness of incorporating remotely sensed proxies for soil moisture and catchment wetness in flood forecasting systems.

Soil Moisture Retrievals From the WindSat Spaceborne Polarimetric Microwave Radiometer

An existing methodology to derive surface soil moisture from passive microwave satellite observations is applied to the WindSat multifrequency polarimetric microwave radiometer. The methodology is a radiative-transfer-based model that has successfully been applied to a series of (historical) satellite sensors, including the Advanced Microwave Scanning Radiometer for Earth Observing System (AMSR-E). Brightness temperature observations from the WindSat and AMSR-E radiometers were compared, and the WindSat observations were adjusted to overcome small sensor differences (e.g., frequency, bandwidth, incidence angle, and original sensor calibration procedure). The method to relate Ka-band brightness temperature observations to land surface temperature was adapted to the overpass times of WindSat. Statistical analysis with both satellite-observed and in situ soil moistures indicates that the quality of the newly derived WindSat soil moisture product is similar to that obtained with AMSR-E after the adjustment of the WindSat brightness temperature observations. The average correlation coefficients (R) between satellite soil moisture and in situ observations are similar for the two satellites with average values of R = 0.60 for WindSat and R = 0.62 for AMSR-E as calculated from 33 sites. On a global scale, the average correlation coefficient between the two satellite soil moisture products is high with a value of R = 0.83. The results of this study demonstrate that soil moisture from WindSat is consistent with existing soil moisture products derived from AMSR-E using the land parameter retrieval model. Therefore, the soil moisture retrievals from these two satellites could easily be combined to increase the temporal resolution of satellite-derived soil moisture observations.

Estimating the Soil Temperature Profile from a single Depth Observation: A simple Empirical Heatflow Solution

[1] Two field data sets are used to model near-surface soil temperature profiles in a bare soil. It is shown that the commonly used solutions to the heat flow equations by Van Wijk perform well when applied at deeper soil layers, but result in large errors when applied to near surface layers, where more extreme variations in temperature occur. The reason for this is that these approaches do not consider heat sources or sinks below the surface. This paper proposes a new approach for modeling the surface soil temperature profiles from a single observation depth. This approach consists of two parts: 1) modeling an instantaneous ground flux profile based on net radiation and the ground heat flux at 5 cm depth; and 2) use of this ground heat flux profile to extrapolate a single temperature observation to a complete surface temperature profile. The new model is validated under different field and weather conditions showing low RMS errors of 1–3 K for wet to dry conditions. Finally, the proposed model is tested under limitations in input data that are associated with remote sensing applications. It is shown that these limitations result in only small increases in the overall error. This approach may be useful for satellite-based global energy balance applications. Citation: Holmes, T. R. H., M. Owe, R. A. M. De Jeu, and H. Kooi (2008), Estimating the soil temperature profile from a single depth observation: A simple empirical heatflow solution, Water Resour. Res., 44, W02412, doi:10.1029/2007WR005994.