R. P. Lepping

THE WIND MAGNETIC FIELD INVESTIGATION

The magnetic field experiment on WIND will provide data for studies of a broad range of scales of structures and fluctuation characteristics of the interplanetary magnetic field throughout the mission, and, where appropriate, relate them to the statics and dynamics of the magnetosphere. The basic instrument of the Magnetic Field Investigation (MFI) is a boom-mounted dual triaxial fluxgate magnetometer and associated electronics. The dual configuration provides redundancy and also permits accurate removal of the dipolar portion of the spacecraft magnetic field. The instrument provides (1) near real-time data at nominally one vector per 92 s as key parameter data for broad dissemination, (2) rapid data at 10.9 vectors s−1 for standard analysis, and (3) occasionally, snapshot (SS) memory data and Fast Fourier Transform data (FFT), both based on 44 vectors s−1. These measurements will be precise (0.025%), accurate, ultra-sensitive (0.008 nT/step quantization), and where the sensor noise level is <0.006 nT r.m.s. for 0–10 Hz. The digital processing unit utilizes a 12-bit microprocessor controlled analogue-to-digital converter. The instrument features a very wide dynamic range of measurement capability, from ±4 nT up to ±65 536 nT per axis in eight discrete ranges. (The upper range permits complete testing in the Earths field.) In the FTT mode power spectral density elements are transmitted to the ground as fast as once every 23 s (high rate), and 2.7 min of SS memory time series data, triggered automatically by pre-set command, requires typically about 5.1 hours for transmission. Standard data products are expected to be the following vector field averages: 0.0227-s (detail data from SS), 0.092 s (‘detail’ in standard mode), 3 s, 1 min, and 1 hour, in both GSE and GSM coordinates, as well as the FFT spectral elements. As has been our teams tradition, high instrument reliability is obtained by the use of fully redundant systems and extremely conservative designs. We plan studies of the solar wind: (1) as a collisionless plasma laboratory, at all time scales, macro, meso and micro, but concentrating on the kinetic scale, the highest time resolution of the instrument (=0.022 s), (2) as a consequence of solar energy and mass output, (3) as an external source of plasma that can couple mass, momentum, and energy to the Earths magnetosphere, and (4) as it is modified as a consequence of its imbedded field interacting with the moon. Since the GEOTAIL Inboard Magnetometer (GIM), which is similar to the MFI instrument, was developed by members of our team, we provide a brief discussion of GIM related science objectives, along with MFI related science goals.

In situ detection of collisionless reconnection in the Earth's magnetotail

Magnetic reconnection is the process by which magnetic field lines of opposite polarity reconfigure to a lower-energy state, with the release of magnetic energy to the surroundings. Reconnection at the Earths dayside magnetopause and in the magnetotail allows the solar wind into the magnetosphere. It begins in a small ‘diffusion region’, where a kink in the newly reconnected lines produces jets of plasma away from the region. Although plasma jets from reconnection have previously been reported, the physical processes that underlie jet formation have remained poorly understood because of the scarcity of in situ observations of the minuscule diffusion region. Theoretically, both resistive and collisionless processes can initiate reconnection, but which process dominates in the magnetosphere is still debated. Here we report the serendipitous encounter of the Wind spacecraft with an active reconnection diffusion region, in which are detected key processes predicted by models of collisionless reconnection. The data therefore demonstrate that collisionless reconnection occurs in the magnetotail.

Interplanetary acceleration of coronal mass ejections

Using an observed relation between speeds of CMEs near the Sun and in the solar wind, we determine an “effective” acceleration acting on the CMEs. We found a linear relation between this effective acceleration and the initial speed of the CMEs. The acceleration is similar to that of the slow solar wind in magnitude. The average solar wind speed naturally divides CMEs into fast and slow ones. Based on the relation between the acceleration and initial speed, we derive an empirical model to predict the arrival of CMEs at 1 AU.

Solar wind control of density and temperature in the near-Earth plasma sheet: WIND/GEOTAIL collaboration

A statistical survey of GEOTAIL observations reveals the following properties of the near-Earth plasma sheet (−15 < XGSM′ < −50 Re): During the periods when the northward IMF dominates, (1) the plasma sheet becomes significantly cold and dense, (2) the best correlations between the plasma sheet and the IMF parameters occur when the latter quantities are averaged over 9−4+3 hours prior to the plasma sheet observations, and (3) temperatures diminish and densities increase near the dawn and dusk flanks of the plasma sheet. We suggest that during prolonged northward IMF periods (∼ several hours) there is a slow diffusive transport of the plasma from the solar wind into the plasma sheet through the the magnetotail flanks.

Geotail observations of magnetic flux ropes in the plasma sheet

[1] Examination of Geotail measurements in the near-tail (X > � 30 RE) has revealed the presence of small flux ropes in the plasma sheet. A total of 73 flux rope events were identified in the Geotail magnetic field measurements between November 1998 and April 1999. This corresponds to an estimated occurrence frequency of � 1 flux rope per 5 hours of central plasma sheet observing time. All of the flux ropes were embedded within high-speed plasma sheet flows with 35 directed Earthward, hVxi = 431 km/s, and 38 moving tailward, hVxi = � 451 km/s. We refer to these two populations as ‘‘BBF-type’’ and ‘‘plasmoid-type’’ flux ropes. The flux ropes were usually several tens of seconds in duration, and the two types were readily distinguished by the sense of their quasisinusoidal Bz perturbations, i.e., � for the ‘‘BBF’’ events and ± for the ‘‘plasmoid’’ events. Most typically, a flux rope was observed to closely follow the onset of a high-speed flow within � 1–2 min. Application of the Lepping-Burlaga constant-a flux rope model (i.e., J = aB) to these events showed that approximately 60% of each class could be acceptably described as cylindrical, force-free flux ropes. The modeling results yielded mean flux rope diameters and core field intensities of 1.4 RE and 20 nT and 4.4 RE and 14 nT for the BBF and plasmoid-type events, respectively. The inclinations of the flux ropes were small relative to the GSM X–Y plane, but a wide range of azimuthal orientations were determined within that plane. The frequent presence of these flux ropes in the plasma sheet is interpreted as strong evidence for multiple reconnection X-lines (MRX) in the near-tail. Hence, our results suggest that reconnection in the near-tail may closely resemble that at the dayside magnetopause where MRX reconnection has been hypothesized to be responsible for the generation of flux transfer events. INDEX TERMS: 2740 Magnetospheric Physics: Magnetospheric configuration and dynamics; 2764 Magnetospheric Physics: Plasma sheet; 2744 Magnetospheric Physics: Magnetotail; 2788 Magnetospheric Physics: Storms and substorms

Geotail observations of the Kelvin‐Helmholtz instability at the equatorial magnetotail boundary for parallel northward fields

For several hours on March 24, 1995, the Geotail spacecraft remained near the duskside magnetotail boundary some 15 RE behind the Earth while the solar wind remained very quiet (V=330 km s−1, n=14–21 cm−3) with a very steady 11-nT northward magnetic field. Geotail experienced multiple crossings of a boundary between a dense (n= 19 cm−3), cool (Tp=40 eV), rapidly flowing (V=310 km s−1) magnetosheath plasma and an interior region characterized by slower tailward velocities (V=100 km s−1), lower but substantial densities (n=3 cm−3) and somewhat hotter ions (220 eV). The crossings recurred with a roughly 3-min periodicity, and all quantities were highly variable in the boundary region. The magnetic field, in fact, exhibited some of the largest fluctuations seen anywhere in space, despite the fact that the exterior magnetosheath field and the interior magnetosphere field were both very northward and nearly parallel. On the basis of an MHD simulation of this event, we argue that the multiple crossings are due to a Kelvin-Helmholtz instability at the boundary that generates vortices which move past the spacecraft. A determination of boundary normals supports Kelvin-Helmholtz theory in that the nonlinear steepening of the waves is seen on the leading edge of the waves rather than on the trailing edge, as has sometimes been seen in the past. It is concluded that the Kelvin-Helmholtz instability is an important process for transferring energy, momentum and particles to the magnetotail during times of very northward interplanetary magnetic field.

Magnetic Field Observations near Venus: Preliminary Results from Mariner 10

The NASA-GSFC magnetic field experiment on Mariner 10 is the first flight of a dual magnetometer system conceived to permit accurate measurements of weak magnetic fields in space in the presence of a significant and variable spacecraft magnetic field. Results from a preliminary analysis of a limted data set are summarized in this report, which is restricted primarily to Venus encounter. A detached bow shock wave that develops as the super Alfv�nic solar wind interacts with the Venusian atmosphere has been observed. However, the unique coincidence of trajectory position and interplanetary field orientation at the time of bow shock crossing led to a very disturbed shock profile with considerably enhanced upstream magnetic fluctuations. At present it is not possible to ascertain the nature and characteristics of the obstacle responsible for deflecting the solar wind flow. Far downstream disturbances associated with the solar wind wake have been observed.

A magnetic cloud containing prominence material: January 1997

This work discusses the relations among (1) an interplanetary force-free magnetic cloud containing a plug of cold high-density material with unusual composition, (2) a coronal mass ejection (CME), (3) an eruptive prominence, and (4) a model of prominence material supported by a force-free magnetic flux rope in a coronal streamer. The magnetic cloud moved past the Wind spacecraft located in the solar wind upstream of Earth on January 10 and 11, 1997. The magnetic field configuration in the magnetic cloud was approximately a constant-α, force-free flux rope. The 4He++/H+ abundance in the most of the magnetic cloud was similar to that of the streamer belt material, suggesting an association between the magnetic cloud and a helmet streamer. A very cold region of exceptionally high density was detected at the rear of the magnetic cloud. This dense region had an unusual composition, including (1) a relatively high (10%) 4He++/He+ abundance (indicating a source near the photosphere), and (2) 4He+, with an abundance relative to 4He++ of ∼1%, and the unusual charge states of O5+ and Fe5+ (indicating a freezing-in temperature of (1.6–4.0) × 105 °K, which is unusually low, but consistent with that expected for prominence material). Thus we suggest that the high-density region might be prominence material. The CME was seen in the solar corona on January 6, 1997, by the large angle and spectrometric coronagraph (LASCO) instrument on SOHO shortly after an eruptive prominence. A helmet streamer was observed near the latitude of the eruptive prominence a quarter of a solar rotation before and after the eruptive prominence. These observations are consistent with recent models, including the conceptual model of Low and Hundhausen [1995] for a quasi-static helmet streamer containing a force-free flux rope which supports prominence material and the dynamical model of Wu et al. [1997] for CMEs produced by the disruption of such a configuration.

Magnetic field studies at jupiter by voyager 1: preliminary results.

Results obtained by the Goddard Space Flight Center magnetometers on Voyager 1 are described. These results concern the large-scale configuration of the Jovian bow shock and magnetopause, and the magnetic field in both the inner and outer magnetosphere. There is evidence that a magnetic tail extending away from the planet on the nightside is formed by the solar wind-Jovian field interaction. This is much like Earths magnetosphere but is a new configuration for Jupiters magnetosphere not previously considered from earlier Pioneer data. We report on the analysis and interpretation of magnetic field perturbations associated with intense electrical currents (approximately 5 x 106 amperes) flowing near or in the magnetic flux tube linking Jupiter with the satellite Jo and induced by the relative motion between Io and the corotating Jovian magnetosphere. These currents may be an important source of heating the ionosphere and interior of Io through Joule dissipation.

Bipolar electrostatic structures in the shock transition region: Evidence of electron phase space holes

We present observations of intense, bipolar, electrostatic structures in the transition region of the terrestrial bow shock from the Wind spacecraft. The electric field signatures are on the order of a tenth of a millisecond in duration and greater than 100 mV/m in amplitude. The measured electric field is generally larger on the smaller dipole antenna, indicating a small spatial size. We compare the potential on the two dipole antennas with a model of antenna response to a Gaussian potential profile. This result agrees with a spatial scale determined by convection and gives a characteristic scale size of 2–7 λd. We interpret the observations as small scale convecting unipolar potential structures, consistent with simulations of electron phase space holes and discuss the results in the context of electron thermalization at strong collisionless shocks.