R. Tom Baker

Ammonia-borane: the hydrogen source par excellence?

Ammonia-borane, H3NBH3, is an intriguing molecule for chemical hydrogen storage applications. With both protic N-H and hydridic B-H bonds, three H atoms per main group element, and a low molecular weight, H3NBH3 has the potential to meet the stringent gravimetric and volumetric hydrogen storage capacity targets needed for transportation applications. Furthermore, devising an energy-efficient chemical process to regenerate H3NBH3 from dehydrogenated BNHx material is an important step towards realization of a sustainable transportation fuel. In this perspective we discuss current progress in catalysis research to control the rate and extent of hydrogen release and preliminary efforts at regeneration of H3NBH3.

Importance of Out-of-State Spin–Orbit Coupling for Slow Magnetic Relaxation in Mononuclear FeII Complexes

Two mononuclear high-spin Fe(II) complexes with trigonal planar ([Fe(II)(N(TMS)(2))(2)(PCy(3))] (1) and distorted tetrahedral ([Fe(II)(N(TMS)(2))(2)(depe)] (2) geometries are reported (TMS = SiMe(3), Cy = cyclohexyl, depe = 1,2-bis(diethylphosphino)ethane). The magnetic properties of 1 and 2 reveal the profound effect of out-of-state spin-orbit coupling (SOC) on slow magnetic relaxation. Complex 1 exhibits slow relaxation of the magnetization under an applied optimal dc field of 600 Oe due to the presence of low-lying electronic excited states that mix with the ground electronic state. This mixing re-introduces orbital angular momentum into the electronic ground state via SOC, and 1 thus behaves as a field-induced single-molecule magnet. In complex 2, the lowest-energy excited states have higher energy due to the ligand field of the distorted tetrahedral geometry. This higher energy gap minimizes out-of-state SOC mixing and zero-field splitting, thus precluding slow relaxation of the magnetization for 2.

In Situ Multinuclear NMR Spectroscopic Studies of the Thermal Decomposition of Ammonia Borane in Solution

The development of condensed phase hydrogen storage materials for fuel cell powered vehicles capable of meeting the 2015 system target goals of >82 g H2 L-1 volumetric density and >90 g H2 kg-1 gravimetric density has attracted recent interest. The details of the mechanisms for hydrogen release from AB are not completely understood; however, significant progress has been made in furthering our understanding of these mechanisms. This work was funded by the Office of Energy Efficiency and Renewable Energy, U.S. Department of Energy (DOE) as part of the Chemical Hydrogen Storage Center and carried out at the Pacific Northwest National Laboratory (operated by Battelle for DOE).

Iron Complex-Catalyzed Ammonia–Borane Dehydrogenation. A Potential Route toward B–N-Containing Polymer Motifs Using Earth-Abundant Metal Catalysts

Ammonia-borane (NH(3)BH(3), AB) has garnered interest as a hydrogen storage material due to its high weight percent hydrogen content and ease of H(2) release relative to metal hydrides. As a consequence of dehydrogenation, B-N-containing oligomeric/polymeric materials are formed. The ability to control this process and dictate the identity of the generated polymer opens up the possibility of the targeted synthesis of new materials. While precious metals have been used in this regard, the ability to construct such materials using earth-abundant metals such as Fe presents a more economical approach. Four Fe complexes containing amido and phosphine supporting ligands were synthesized, and their reactivity with AB was examined. Three-coordinate Fe(PCy(3))[N(SiMe(3))(2)](2) (1) and four-coordinate Fe(DEPE)[N(SiMe(3))(2)](2) (2) yield a mixture of (NH(2)BH(2))(n) and (NHBH)(n) products with up to 1.7 equiv of H(2) released per AB but cannot be recycled (DEPE = 1,2-bis(diethylphosphino)ethane). In contrast, Fe supported by a bidentate P-N ligand (4) can be used in a second cycle to afford a similar product mixture. Intriguingly, the symmetric analogue of 4 (Fe(N-N)(P-P), 3), only generates (NH(2)BH(2))(n) and does so in minutes at room temperature. This marked difference in reactivity may be the result of the chemistry of Fe(II) vs Fe(0).

Coordination of aminoborane, NH2BH2, dictates selectivity and extent of H2 release in metal-catalysed ammonia borane dehydrogenation

In situ(11)B NMR monitoring, computational modeling, and external trapping studies show that selectivity and extent of H(2) release in metal-catalysed dehydrogenation of ammonia borane, NH(3)BH(3), are determined by coordination of reactive aminoborane, NH(2)BH(2), to the metal center.

Aerobic oxidation of lignin models using a base metal vanadium catalyst.

Dipicolinate vanadium(V) complexes oxidize lignin model complexes pinacol monomethyl ether (A), 2-phenoxyethanol (B), 1-phenyl-2-phenoxyethanol (C), and 1,2-diphenyl-2-methoxyethanol (D). With substrates having C-H bonds adjacent to the alcohol moiety (B-D), the C-H bond is broken in pyridine-d(5) solvent, yielding 2-phenoxyacetaldehyde from B, 2-phenoxyacetophenone from C, and benzoin methyl ether from D. In DMSO-d(6) solvent the reaction is slower, and both C-H and C-C bond cleavage products are observed for D. The vanadium(IV) products of these reactions have been identified and characterized. Catalytic oxidation of C and D has been demonstrated using air and (dipic)V(O)O(i)Pr. For both substrates, the C-C bond between the alcohol and ether groups is broken in the catalytic oxidation. 1-Phenyl-2-phenoxyethanol is oxidized to a mixture of phenol, formic acid, benzoic acid, and 2-methoxyacetophenone. The products of oxidation of 1,2-diphenyl-2-methoxyethanol depend on the solvent; in DMSO benzaldehyde and methanol are the major products, while benzoic acid and methyl benzoate are the major products obtained in pyridine solvent. Phenyl substituents on the model complex facilitate the oxidation, with relative rates of oxidation D > C > B.

Knocking on Wood: Base Metal Complexes as Catalysts for Selective Oxidation of Lignin Models and Extracts

This work began as part of a biomass conversion catalysis project with UC Santa Barbara funded by the first NSF Chemical Bonding Center, CATSB. Recognizing that catalytic aerobic oxidation of diol C-C bonds could potentially be used to break down lignocellulose, we began to synthesize oxovanadium complexes and explore their fundamental reactivity. Of course there were theories regarding the oxidation mechanism, but our mechanistic studies soon revealed a number of surprises of the type that keep all chemists coming back to the bench! We realized that these reactions were also exciting in that they actually used the oxygen-on-every-carbon property of biomass-derived molecules to control the selectivity of the oxidation. When we found that these oxovanadium complexes tended to convert sugars predominantly to formic acid and carbon dioxide, we replaced one of the OH groups with an ether and entered the dark world of lignin chemistry. In this Account, we summarize results from our collaboration and from our individual labs. In particular, we show that oxidation selectivity (C-C vs C-O bond cleavage) of lignin models using air and vanadium complexes depends on the ancillary ligands, the reaction solvent, and the substrate structure (i.e., phenolic vs non-phenolic). Selected vanadium complexes in the presence of added base serve as effective alcohol oxidation catalysts via a novel base-assisted dehydrogenation pathway. In contrast, copper catalysts effect direct C-C bond cleavage of these lignin models, presumably through a radical pathway. The most active vanadium catalyst exhibits unique activity for the depolymerization of organosolv lignin. After Weckhuysens excellent 2010 review on lignin valorization, the number of catalysis studies and approaches on both lignin models and extracts has expanded rapidly. Today we are seeing new start-ups and lignin production facilities sprouting up across the globe as we all work to prove wrong the old pulp and paper chemists adage: you can make anything from lignin except money!

Phase-separable catalysis using room temperature ionic liquids and supercritical carbon dioxide

A new phase-separable catalysis concept is demonstrated using supercritical carbon dioxide and the room temperature ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate for hydrogenation of alkenes and carbon dioxide.

Mechanism of Alcohol Oxidation by Dipicolinate Vanadium(V): Unexpected Role of Pyridine

Dipicolinate vanadium(V) alkoxide complexes (dipic)V(V)(O)(OR) (OR = isopropoxide (1), n-butanoxide (2), cyclobutanoxide (3), and α-tert-butylbenzylalkoxide (4)) react with pyridine to afford vanadium(IV) and 0.5 equiv of an aldehyde or ketone product. The role of pyridine in the reaction has been investigated. Both NMR and X-ray crystallography experiments indicate that pyridine coordinates to 1, which is in equilibrium with (dipic)V(V)(O)(O(i)Pr)(pyr) (1-Pyr). Kinetic studies of the alcohol oxidation suggest a pathway where the rate-limiting step is bimolecular and involves attack of pyridine on the C-H bond of the isopropoxide ligand of 1 or 1-Pyr. The oxidations of mechanistic probes cyclobutanol and α-tert-butylbenzylalcohol support a two-electron pathway proceeding through a vanadium(III) intermediate. The alcohol oxidation reaction is promoted by more basic pyridines and facilitated by electron-withdrawing substituents on the dipicolinate ligand. The involvement of base in the elementary alcohol oxidation step observed for the dipicolinate system is an unprecedented mechanism for vanadium-mediated alcohol oxidation and suggests new ways to tune reactivity and selectivity of vanadium catalysts.

Cobalt Fluorocarbenes: Cycloaddition Reactions with Tetrafluoroethylene and Reactivity of the Perfluorometallacyclic Products

Cobalt fluorocarbene complexes CpCo(═CFR(F))(PPh2Me) (Cp = η(5)-C5H5, R(F) = F or CF3) react with tetrafluoroethylene to give the metallacyclobutanes CpCo(κ(2)-CFR(F)CF2CF2-)(PPh2Me) in the first examples of cycloaddition reactions between perfluoroalkenes and metal perfluorocarbenes. The metallacyclic products undergo a variety of reactions upon activation of the C-F bonds, including Brønsted acid-catalyzed C-F/Co-C scrambling. Implications for metal-catalyzed metathesis and polymerization of perfluoroalkenes are discussed.